Anderic A25-TX012 / A25-TX025 6 Speed DC Ceiling Fan Remote Control and Receiver Kit Instruction Manual

pengenalan

This instruction manual provides detailed information for the installation, operation, and maintenance of your Anderic RRTX012/FD40H02R Remote and Receiver Kit. This kit is designed as a direct replacement for specific Harbor Breeze ceiling fan remote models (A25-TX012, A25-TX025) and receiver models (FD30-H02R, FD40-H02R), offering enhanced control over your ceiling fan's speed and lighting functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Figure 1: Anderic RRTX012 Remote and FD40-H02R Receiver Kit components.

Maklumat Keselamatan

AMARAN: To reduce the risk of fire, electric shock, or personal injury, always turn off power to the ceiling fan at the main circuit breaker or fuse box before beginning installation or performing any maintenance.

• Ensure all electrical connections comply with local codes and ordinances, and National Electrical Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.
• Do not use this kit with solid-state speed controls.
• This kit is intended for use with DC ceiling fans only. Verify your fan's compatibility before installation.
• Jauhkan bateri daripada kanak-kanak. Jika tertelan, dapatkan rawatan perubatan segera.
• Buang bateri terpakai dengan betul mengikut peraturan tempatan.

Kandungan Pakej

The Anderic RRTX012/FD40H02R Remote and Receiver Kit includes the following components:

• 1 x Anderic RRTX012 Remote Control
• 1 x Anderic FD40-H02R Receiver
• 1 x Remote Wall Mount Cradle (optional, may vary)
• 1 x 12V Battery (for remote control)

Persediaan dan Pemasangan

The installation of the receiver requires access to the wiring compartment of your ceiling fan. It is recommended that installation be performed by a qualified electrician if you are not comfortable with electrical wiring.

Pemasangan Penerima:

1. Matikan Kuasa: Before starting, ensure the power to the ceiling fan is completely OFF at the circuit breaker.
2. Access Fan Wiring: Carefully lower the canopy of your ceiling fan to expose the wiring connections.
3. Disconnect Existing Receiver (if applicable): If replacing an old receiver, carefully disconnect all wires from the existing unit. Note the color coding for re-connection.
4. Connect New Receiver: The Anderic FD40-H02R receiver is designed for plug-and-play installation with compatible Harbor Breeze fans. Connect the wires from the receiver to the corresponding wires in your ceiling fan's wiring harness. Typically, this involves matching colors (e.g., Black to Black, White to White, Blue to Blue for light, etc.). Refer to your ceiling fan's original manual for specific wiring diagrams if needed.
5. Penerima Selamat: Carefully tuck the receiver and all wires into the fan's canopy, ensuring no wires are pinched. Re-secure the canopy.

Figure 2: Receiver showing wiring connections.

Rajah 3: Belakang view unit penerima.

Remote Control Setup and Pairing:

1. Pasang Bateri: Open the battery compartment on the back of the Anderic RRTX012 remote control and insert the provided 12V battery, observing polarity.
2. Pulihkan Kuasa: Turn the power back ON at the main circuit breaker.
3. Pasangkan Alat Jauh: Within 5 seconds of restoring power to the fan, press and hold the "LEARN" button (often a small recessed button) on the remote control. Hold until the fan light blinks or the fan responds, indicating successful pairing. If there is no dedicated "LEARN" button, try pressing and holding the "Power" or "Light" button for 5 seconds.
4. Kefungsian Ujian: Test all functions of the remote control (fan speeds, light on/off, dimmer) to ensure proper operation.

Figure 4: Anderic RRTX012 Remote Control.

Arahan Operasi

The Anderic RRTX012 remote control provides intuitive control over your ceiling fan and its integrated light.

• Butang Kelajuan Kipas (1-6): Press the numbered buttons (1 through 6) to select the desired fan speed, with 1 being the lowest and 6 being the highest.
• Fan Power Button (Center): Press the central power button to turn the fan ON or OFF.
• Light ON/OFF Button: Press the light bulb icon button to turn the fan light ON or OFF.
• Light Dimmer Buttons (Up/Down Arrows): Use the up and down arrow buttons next to the light icon to adjust the brightness of the fan light.
• Timer Buttons (2H, 4H, 8H): Press these buttons to set the fan to operate for a specific duration (2 hours, 4 hours, or 8 hours) before automatically turning off.
• Reverse Fan Direction Button (Snowflake/Sun Icon): Press this button to reverse the direction of the fan blades, typically used for seasonal comfort (downward airflow for cooling in summer, upward airflow for circulating warm air in winter).

Penyelenggaraan

Penggantian Bateri:

When the remote control's range decreases or it becomes unresponsive, it is likely time to replace the battery.

1. Cari petak bateri di belakang alat kawalan jauh.
2. Luncurkan buka penutup bateri.
3. Tanggalkan bateri 12V lama.
4. Insert a new 12V battery, ensuring correct polarity (+ and -).
5. Tutup penutup bateri dengan selamat.
6. Buang bateri lama secara bertanggungjawab.

Pembersihan:

Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support regarding your Anderic RRTX012/FD40H02R Remote and Receiver Kit, please contact the manufacturer, Dan's Electronics Etc., Inc., or visit the official Anderic webtapak.

Anderic Official Store: Visit Anderic Store on Amazon

Anderic is a US-based company committed to providing high-quality replacement remote controls and accessories.