Pengawal Tanpa Wayar PowerA untuk Nintendo Switch - Manual Pengguna Dungeon Jump Mario

pengenalan

This manual provides essential instructions for setting up, operating, and maintaining your PowerA Enhanced Wireless Controller for Nintendo Switch, featuring the Dungeon Jump Mario design. Please read this manual thoroughly before use to ensure optimal performance and longevity of your controller.

Apa yang ada dalam Kotak

• PowerA Enhanced Wireless Controller (Dungeon Jump Mario)
• 10 ft (3m) USB-C Charge Cable
• Manual Pengguna (dokumen ini)

Produk Selesaiview

Familiarize yourself with the various components of your PowerA Wireless Controller.

Image 1: Controller Features Diagram. This image displays the PowerA Enhanced Wireless Controller from a top-down perspective, highlighting key features such as anti-friction rings, low battery indicator LED, USB-C charge port, program button, and advanced gaming buttons.

Imej 2: Depan View. Depan langsung view of the PowerA Enhanced Wireless Controller, showcasing the Dungeon Jump Mario design, joysticks, D-pad, and face buttons.

Persediaan

1. Mengecas Pengawal

The controller comes with a built-in rechargeable lithium-ion battery. Before first use, fully charge the controller.

1. Connect the small end of the included 10 ft (3m) USB-C charge cable to the USB-C port on the top of the controller.
2. Connect the other end of the cable to a USB port on your Nintendo Switch dock or a USB wall charger (not included).
3. The LED indicator on the front of the controller will illuminate to show charging status. It will turn off when fully charged.

Image 3: Charging Port. This image shows the top of the controller with the USB-C charging cable inserted into the port.

2. Pairing with Nintendo Switch

Follow these steps to pair your wireless controller with your Nintendo Switch console:

1. Ensure your Nintendo Switch console is powered on and updated to the latest system version.
2. Dari Menu HOME, pilih Pengawal, kemudian Tukar Pegangan/Pesanan.
3. Semasa berada di skrin Tukar Cengkaman/Pesanan, tekan dan tahan butang Butang SYNC on the back of the PowerA controller for at least three seconds. The Player LED(s) will begin to flash.
4. Once paired, the Player LED(s) will remain solid, indicating the controller is connected.
5. Tekan ke Butang to confirm and exit the menu.

Note: The controller will automatically reconnect to your Switch console when powered on and within range, provided it was previously paired.

Image 4: Sync Button Location. This image shows the rear of the controller, indicating the position of the small circular Sync button.

Arahan Operasi

Butang Permainan Lanjutan

The controller features two mappable Advanced Gaming Buttons (AGB) on the back, allowing for on-the-fly button assignments.

1. Tekan ke Butang Program on the back of the controller. The Program LED will flash, indicating the controller is in programming mode.
2. Press the button you wish to map (A/B/X/Y, L/R, ZL/ZR, Left Stick Press, Right Stick Press, D-pad). The Program LED will flash rapidly.
3. Press the Advanced Gaming Button (AGB L or AGB R) you wish to assign. The Program LED will stop flashing, indicating the button has been successfully mapped.
4. To clear a mapped button, press the Program Button and then the AGB you wish to clear. The Program LED will turn off.

Image 5: Advanced Gaming Buttons. This diagram highlights the location of the Program Button and the two Advanced Gaming Buttons on the underside of the controller.

Kawalan Pergerakan

This controller supports motion controls for compatible Nintendo Switch games. The internal gyroscope allows for intuitive tilt-based gameplay.

Amaran Bateri Rendah

When the controller's battery is low, the Low Battery Warning LED indicator on the front of the controller will flash. Connect the USB-C charge cable to recharge the controller.

Image 6: Player Indicator LEDs. This image shows the bottom front edge of the controller, where the four Player Indicator LEDs are located, which also serve as the low battery warning.

Penyelenggaraan

• Pembersihan: Gunakan kain lembut dan kering untuk membersihkan pengawal. Elakkan menggunakan bahan kimia yang keras atau bahan yang melelas.
• Storan: Simpan pengawal di tempat yang sejuk dan kering jauh dari cahaya matahari langsung dan suhu yang melampau.
• Penjagaan Bateri: Untuk memanjangkan hayat bateri, elakkan daripada kerap mencas sepenuhnya pengawal. Caskannya secara berkala, walaupun tidak digunakan secara berterusan.
• Penjagaan Kabel: Handle the USB-C charge cable carefully. Avoid bending or twisting it excessively.

Menyelesaikan masalah

Controller not pairing or connecting:

• Pastikan pengawal dicas.
• Verify the Nintendo Switch console is updated to the latest system version.
• Ulangi proses pemasangan seperti yang diterangkan dalam bahagian "Memasangkan dengan Nintendo Switch".
• Move closer to the Nintendo Switch console to ensure you are within Bluetooth range.
• Try restarting your Nintendo Switch console.

Butang atau kayu bedik tidak responsif:

• Pastikan pengawal disambungkan dan dicas dengan betul.
• Test the controller in a different game or in the Switch's controller calibration settings.
• If issues persist, contact PowerA support.

Battery not holding a charge:

• Ensure the USB-C cable is securely connected to both the controller and a power source.
• Cuba port USB atau penyesuai dinding yang lain.
• The internal battery has a limited lifespan. If the controller is old, battery degradation may occur.

Had Penting:

This controller does TIDAK support HD rumble, IR (Infrared), or Amiibo NFC functionality. These features are exclusive to official Nintendo Joy-Con controllers and some Nintendo Pro Controllers.

Spesifikasi

Waranti dan Sokongan

PowerA backs all products with a two-year limited warranty. For warranty claims, technical assistance, or further support, please visit the official PowerA support webtapak:

Sokongan PowerA

Sila simpan bukti pembelian anda untuk perkhidmatan waranti.