Ninestars DZT-10-35 Motion Sensor Trash Can User Manual

1. Pengenalan

Thank you for choosing the Ninestars DZT-10-35 Motion Sensor Trash Can. This innovative product is designed to provide a hygienic and convenient waste disposal solution for your home or office. Featuring hands-free operation, a removable leak-proof inner bucket, and a built-in manual mode, this trash can simplifies daily cleanups.

Image 1.1: The Ninestars DZT-10-35 Motion Sensor Trash Can.

2. Persediaan dan Pemasangan

2.1 Pemasangan Bateri

1. Cari petak bateri di bahagian bawah penutup.
2. Buka penutup petak bateri.
3. Insert two (2) AA batteries (not included) according to the polarity indicators (+/-).
4. Tutup penutup petak bateri dengan selamat.

2.2 Installing the Trash Bag

1. Tanggalkan penutup dari badan tong sampah.
2. Lift out the removable inner bucket.
3. Place a 2.6 Gallon (10L) trash bag into the inner bucket. Ensure the bag edges are folded over the top rim of the inner bucket.
4. Carefully place the inner bucket back into the trash can body.
5. Replace the lid, ensuring it is properly aligned.

Image 2.1: The removable leak-proof inner bucket for easy bag changes and cleaning.

3. Operasi

3.1 Motion Sensor Mode

• Ensure the power switch (usually located on the back or side of the lid) is in the 'ON' position.
• Wave your hand approximately 6-10 inches above the sensor located on the lid. The lid will open automatically.
• The lid will remain open for approximately 5 seconds, indicated by a countdown display, before closing automatically.
• To keep the lid open longer, simply keep your hand within the sensor's range.

Image 3.1: Hands-free operation using the motion sensor to open the lid.

3.2 Mod Manual

• For extended use or larger cleanups, you can activate manual mode.
• Press the 'OPEN' button (if available, or a designated manual open button) on the lid. The lid will open and remain open.
• To close the lid, press the 'CLOSE' button (if available, or the same button used to open it).

4. Penyelenggaraan

4.1 Pembersihan

• Luaran: Lap bahagian luar tong sampah dengan kain lembutamp kain. Elakkan pembersih yang melelas atau bahan kimia yang keras.
• Inner Bucket: The removable inner bucket can be washed with soap and water. Ensure it is completely dry before placing it back into the trash can.
• Kawasan Sensor: Gently wipe the sensor window with a soft, dry cloth to ensure optimal performance.

4.2 Penggantian Bateri

When the sensor's response becomes slow or the lid fails to open/close, it is likely time to replace the batteries. Follow the battery installation steps in Section 2.1.

5. Penyelesaian masalah

• Lid does not open or close:
  • Periksa sama ada suis kuasa berada dalam kedudukan 'ON'.
  • Gantikan bateri dengan bateri AA yang baharu.
  • Ensure there are no obstructions blocking the lid's movement or the sensor's path.
  • If the issue persists after changing batteries, try removing the batteries for a few minutes and then reinserting them to reset the sensor.
• Sensor is not responding:
  • Wipe the sensor window clean with a soft, dry cloth.
  • Ensure there is adequate lighting in the area; extreme darkness or direct sunlight can sometimes affect sensor performance.
  • Verify that the batteries are correctly installed and have sufficient power.
• Lid closes too quickly:
  • Ensure your hand or object is within the sensor's range for the desired duration.
  • Check battery level; low batteries can affect sensor timing.

6. Spesifikasi

Image 6.1: Product dimensions and battery requirements.

7. Waranti dan Sokongan

The Ninestars DZT-10-35 Motion Sensor Trash Can comes with a Two Year Guarantee from the date of purchase, covering manufacturing defects under normal use. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official Ninestars webtapak.

Anda juga boleh mendapatkan lebih banyak maklumat dan sumber sokongan dengan melawati Ninestars Store on Amazon.