Manual Pengguna Dispenser Air Midea MYL712S-B

pengenalan

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Midea Water Dispenser Model MYL712S-B. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Midea MYL712S-B is a floor-standing water dispenser offering hot, cold, and normal temperature water, featuring a 3-push button faucet and an integrated 15-liter small refrigerator compartment.

Arahan Keselamatan

Untuk mengelakkan kecederaan diri atau kerosakan harta benda, patuhi langkah berjaga-jaga keselamatan berikut:

• Ensure the dispenser is connected to a grounded power outlet (220V/60Hz).
• Jangan rendam dispenser, kord atau palam dalam air atau cecair lain.
• Jauhkan dispenser daripada cahaya matahari langsung dan sumber haba.
• Do not operate the dispenser with a damaged cord or plug.
• Cabut plag dispenser sebelum membersihkan atau melakukan sebarang penyelenggaraan.
• Supervise children when they are near the appliance. The hot water faucet has a safety lock.
• Do not block ventilation openings on the appliance.
• Only use bottled water suitable for water dispensers.
• Jangan simpan bahan letupan seperti tin aerosol dengan bahan dorong mudah terbakar di dalam perkakas ini.

Produk Selesaiview

Familiarize yourself with the components of your Midea Water Dispenser.

Rajah 1: Depan view of the Midea MYL712S-B Water Dispenser. This image shows the dispenser in its upright, floor-standing position. The upper section contains the water bottle receptacle, the three push-button faucets for hot, cold, and normal water, and the drip tray. Below the dispenser section, a small refrigerator compartment is visible, indicated by the word "REFRIGERATOR" in blue lettering.

Komponen Utama:

• Water Bottle Receptacle: Located at the top, designed to hold standard water bottles.
• Push-Button Faucets: Three distinct buttons for dispensing hot, cold, and normal temperature water.
• Dulang Drip: Collects spilled water, removable for easy cleaning.
• Lampu Penunjuk: Display power status, heating, and cooling operations.
• Ruang Peti Sejuk: A 15-liter storage space at the bottom for cooling beverages or small items.
• Kord Kuasa: Untuk menyambung ke salur keluar elektrik.

Persediaan dan Pemasangan

1. Membongkar: Keluarkan dispenser daripada pembungkusannya dengan berhati-hati. Periksa sebarang kerosakan.
2. penempatan: Place the dispenser on a flat, stable surface in a well-ventilated area, away from direct sunlight and heat sources. Ensure there is at least 10 cm (4 inches) of space from walls for proper ventilation.
3. Pembersihan Awal: Before first use, clean the drip tray and water tank (if accessible) with mild soap and water. Rinse thoroughly.
4. Pemasangan Botol Air:
   • Remove the protective seal from a new water bottle.
   • Carefully invert the water bottle and place it firmly onto the water bottle receptacle at the top of the dispenser. Ensure it is seated correctly to prevent leaks.
5. Sambungan Kuasa: Palamkan kord kuasa ke soket elektrik 220V/60Hz yang dibumikan.
6. Aliran Air Permulaan: Before turning on heating or cooling, dispense at least 1 liter of water from each faucet (hot, cold, normal) to ensure the tanks are filled and air is purged from the system. This prevents damage to heating elements.

Arahan Operasi

Mendispens Air:

• Air Sejuk: Press the blue button. The cold water indicator light will illuminate when cooling is active.
• Air Panas: Press the red button. For safety, the hot water faucet typically has a child-safety lock. Push the safety lock forward or backward (depending on design) and then press the red button. The hot water indicator light will illuminate when heating is active.
• Normal Temperature Water: Press the green or uncolored button (if applicable). This water is dispensed at room temperature.

Allow approximately 15-30 minutes for the water to reach desired hot or cold temperatures after initial setup or refilling.

Using the Refrigerator Compartment:

The lower compartment functions as a small refrigerator. Open the door to store beverages or small food items. This compartment is not designed for freezing or long-term storage of perishable goods.

Penyelenggaraan dan Pembersihan

Pembersihan tetap memastikan prestasi dan kebersihan yang optimum.

1. Pembersihan Luaran: Lap permukaan luar dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
2. Dulang Drip: Remove and empty the drip tray regularly. Wash it with mild soap and water, then rinse and dry thoroughly before replacing.
3. Water Tank (Descaling):
   • Cabut plag dispenser dan keluarkan botol air.
   • Drain all water from the hot and cold tanks using the respective faucets.
   • For descaling, a solution of water and white vinegar (e.g., 1 part vinegar to 4 parts water) can be used. Pour the solution into the water bottle receptacle and allow it to sit for 15-30 minutes.
   • Drain the solution completely. Rinse the tanks multiple times by filling with clean water and draining until no vinegar smell remains.
4. Gegelung pemeluwap: Periodically clean the condenser coils at the back of the dispenser with a soft brush or vacuum cleaner to ensure efficient cooling. Ensure the dispenser is unplugged before cleaning the coils.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information and customer support, please refer to the warranty card included with your product or contact Midea customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the official Midea webtapak atau hubungi pusat perkhidmatan mereka yang dibenarkan.