FERM HDM1014 16mm 1100W Hammer Drill

1. Pengenalan

Thank you for choosing the FERM HDM1014 16mm 1100W Hammer Drill. This powerful corded tool is designed for efficient drilling and hammer drilling in various materials. To ensure safe and optimal performance, please read this instruction manual thoroughly before operating the tool. Keep this manual in a safe place for future reference.

2. Arahan Keselamatan

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Palam alat kuasa mesti sepadan dengan alur keluar. Jangan sekali-kali mengubah suai palam dalam apa jua cara. Jangan gunakan sebarang palam penyesuai dengan alat kuasa yang dibumikan (dibumikan). Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, julat dan peti sejuk.
• Keselamatan Diri: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Perkhidmatan: Minta alat kuasa anda diservis oleh pembaikan bertauliah dengan hanya menggunakan alat ganti yang sama. Ini akan memastikan keselamatan alat kuasa dikekalkan.

3. Kandungan Pakej

Carefully unpack the hammer drill and check if all items are present and undamaged. If any parts are missing or damaged, please contact your supplier immediately.

• FERM HDM1014 Gerudi Tukul
• Drill bits (various sizes)
• Kunci chuck
• Pemegang sisi
• Perhentian mendalam
• Manual Pengguna

4. Ciri-ciri Produk

The FERM HDM1014 hammer drill is equipped with features designed for performance and user convenience:

• Motor 1100W berkuasa: Menyediakan ample power for demanding drilling tasks.
• Chuck Tanpa Kunci 16mm: Allows for quick and easy bit changes without the need for a separate chuck key.
• Fungsi tukul: Engages for efficient drilling in masonry and concrete.
• Fungsi terbalik: Useful for removing stuck drill bits and driving/removing screws.
• Reka bentuk ergonomik: Ensures comfortable handling during prolonged use.

Image: The FERM HDM1014 Hammer Drill, showcasing its robust design, side handle for improved control, and the keyless chuck mechanism. The drill is depicted in its multi-color finish.

5. Persediaan

5.1 Attaching the Side Handle and Depth Stop

1. Longgarkan pemegang sisi dengan memutarnya melawan arah jam.
2. Slide the side handle onto the front of the drill housing.
3. Insert the depth stop into the hole on the side handle. Adjust the depth stop to the desired drilling depth.
4. Tighten the side handle by rotating it clockwise to secure both the handle and the depth stop.

5.2 Memasang/Membuang Mata Gerudi

1. Pastikan gerudi dicabut dari sumber kuasa.
2. Putar kolar chuck melawan arah jam untuk membuka rahang chuck.
3. Insert the drill bit fully into the chuck jaws.
4. Rotate the chuck collar clockwise to tighten the jaws securely around the drill bit. Ensure the bit is centered and firmly held.
5. Untuk menanggalkannya, putar kolar chuck lawan arah jam dan tarik mata kail keluar.

6. Arahan Operasi

6.1 Sambungan Kuasa

Connect the drill's power cord to a suitable electrical outlet (refer to specifications for voltage requirements). Ensure the power switch is in the 'OFF' position before plugging in.

6.2 Memilih Mod Penggerudian

The FERM HDM1014 features a mode selector switch, typically located on the side of the drill housing. Select the appropriate mode for your task:

• Mod Penggerudian (Ikon Gerudi): For drilling in wood, metal, plastic, and other non-masonry materials.
• Mod Penggerudian Tukul (Ikon Tukul): For drilling in masonry, concrete, and stone. This mode combines rotation with an impact action.

6.3 Starting and Stopping the Drill

• Untuk memulakan gerudi, tekan suis picu.
• Untuk menghentikan gerudi, lepaskan suis pencetus.
• For continuous operation, press the trigger and then press the lock-on button (if available). To release, press the trigger again.

6.4 Menggunakan Fungsi Songsang

The reverse switch is typically located near the trigger. Push it to the left or right to change the direction of rotation. Use the reverse function to remove stuck drill bits or for driving/removing screws (if using appropriate screwdriver bits).

6.5 Drilling Tips

• Always secure your workpiece firmly before drilling.
• Sapukan tekanan yang mantap, sekata. Jangan paksa gerudi.
• For deep holes, periodically withdraw the drill bit to clear debris.
• When drilling metal, use a cutting lubricant to prolong bit life and improve cutting efficiency.

7. Penyelenggaraan

Regular maintenance ensures the longevity and safe operation of your FERM HDM1014 hammer drill.

• Pembersihan: After each use, clean the tool housing with a soft cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris.
• Berus Karbon: The carbon brushes may need replacement after extended use. This should be performed by a qualified service technician.
• Pemeriksaan Kord: Regularly inspect the power cord for any signs of damage. If damaged, have it replaced by a qualified professional.
• Storan: Store the drill in a dry, secure place, out of reach of children.

8. Penyelesaian masalah

If you encounter issues with your FERM HDM1014, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact FERM customer support or an authorized service center.

9. Spesifikasi

Technical specifications for the FERM HDM1014 Hammer Drill:

10. Waranti dan Sokongan

FERM products are manufactured to high-quality standards and are guaranteed against defects in materials and workmanship for a period specified by your local retailer or distributor. Please retain your purchase receipt as proof of purchase.

For warranty claims, technical support, or spare parts, please contact your original point of purchase or visit the official FERM website for contact information and service center locations.

Always refer to the specific warranty terms and conditions provided with your product at the time of purchase.