Manual Pengguna Sarung PC Permainan Fantech CG73 Mid Tower

1. Pengenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fantech CG73 Mid Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and safety.

2. Maklumat Keselamatan

• Sentiasa putuskan sambungan bekalan kuasa dari soket dinding sebelum memasang atau menanggalkan sebarang komponen di dalam bekas PC.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Jauhkan bahagian kecil dan bahan pembungkusan daripada kanak-kanak.
• Ensure proper ventilation around the PC case to prevent overheating.
• Do not expose the case to water or excessive humidity.
• The tempered glass panel is fragile; handle with extreme care to avoid breakage.

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej anda:

• Fantech CG73 Mid Tower Gaming PC Case
• 4 x Kipas RGB Pra-pasang
• Kotak Aksesori (skru, pengikat kabel, kebuntuan, dsb.)
• Manual Pengguna (dokumen ini)

4. Produk Lebihview

Familiarize yourself with the key features and components of the Fantech CG73 PC case.

Rajah 4.1: Depan view of the Fantech CG73 Mid Tower Gaming PC Case, showcasing the hexagonal design and pre-installed RGB fans.

4.1 Fan Support and Cooling

The HEXA CG73 case supports up to 6 RGB fans, providing extreme heat transfer and vibrant RGB lighting. It comes with 4 pre-installed fans.

Rajah 4.2: Dalaman view highlighting fan installation points: 1. Rear fan, 2. Top fans, 3. Front fans, 4. Bottom fans. The case includes 4 pre-installed fans.

4.2 Inner Structure and Motherboard Compatibility

The CG73 case is designed to accommodate various motherboard form factors and storage devices.

Rajah 4.3: Internal layout showing support for ATX, Micro-ATX, and Mini-ITX motherboards, along with dedicated installation locations for 1 SSD and 1 HDD.

4.3 Component Clearance

Ensure your components fit within the case's maximum supported dimensions.

Rajah 4.4: Component clearance specifications: Maximum GPU length of 300mm, maximum CPU cooler height of 165mm. Supports ATX, Mini-ITX, and Micro-ATX motherboards. Motherboard and GPU are not included.

4.4 Handy I/O Ports

The top-front panel provides convenient access to essential ports.

Rajah 4.5: Top-front I/O panel featuring one USB 3.0 port and two USB 2.0 ports for direct access, along with audio jacks and power/reset buttons.

5. Persediaan dan Pemasangan

Follow these steps to install your PC components into the Fantech CG73 case.

1. Sediakan Kes: Carefully remove the side panels. The tempered glass panel should be handled with extreme care.
2. Pasang Papan Induk: Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Secure it with the provided screws.
3. Pasang Penyejuk CPU: If not already installed, mount your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
4. Pasang Kad Grafik (GPU): Insert your GPU into the appropriate PCIe slot on the motherboard. Ensure it does not exceed the maximum length of 300mm. Secure it with screws.
5. Pasang Pemacu Storan:
   • SSD: Mount 2.5-inch SSDs in the designated SSD trays/mounts.
   • HDD: Mount 3.5-inch HDDs in the HDD cage.
   Secure all drives with the appropriate screws.
6. Install Power Supply (PSU): Slide your PSU into the dedicated compartment at the bottom of the case. Secure it with screws from the rear.
7. Pengurusan Kabel: Route all power cables and data cables through the cable management cutouts to the back of the motherboard tray. Connect them to the respective components. Ensure fan and RGB cables are connected to the motherboard or a fan controller.
8. Pasang semula Panel: Once all components are installed and cables are managed, carefully reattach the side panels.

6. Arahan Operasi

After assembly, connect your peripherals and power on your system.

• Hidupkan kuasa: Connect the power cable to your PSU and a wall outlet. Press the power button on the top-front I/O panel.
• Kawalan RGB: The pre-installed RGB fans are typically controlled via your motherboard's RGB software (if connected to an RGB header) or a dedicated RGB controller (if included or purchased separately). Refer to your motherboard manual for specific RGB software instructions.
• Port USB: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting external devices.
• Bicu Audio: Connect your headphones and microphone to the audio jacks on the top panel.

7. Penyelenggaraan

Penyelenggaraan berkala membantu memastikan prestasi optimum dan jangka hayat casing dan komponen PC anda.

• Pembersihan Habuk: Periodically clean dust filters (if present) and internal components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Pembersihan Kipas: Gently clean fan blades with a soft brush or compressed air to prevent dust buildup, which can impede airflow.
• Pembersihan Luaran: Lap bahagian luar bekas dengan lembut, damp cloth. Avoid abrasive cleaners or solvents. For the tempered glass, use a glass cleaner and a microfiber cloth.
• Pemeriksaan Pengurusan Kabel: Periksa penghalaan kabel sekali-sekala untuk memastikan tiada kabel yang menghalang aliran udara atau operasi kipas.

8. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi.

9. Spesifikasi

10. Waranti dan Sokongan

For warranty information and technical support, please refer to the official Fantech webtapak atau hubungi peruncit tempatan anda. Simpan bukti pembelian anda untuk tuntutan waranti.

Untuk bantuan lanjut, layari: www.fantechworld.com