1. Pengenalan
This manual provides comprehensive instructions for the setup, operation, and maintenance of your DIGITUS 2D Barcode Scanner (Model: DA-81002). This device is designed for efficient and accurate scanning of 1D and 2D barcodes, including QR codes, supporting bi-directional scanning at 200 scans/sec. Please read this manual thoroughly before using the scanner to ensure proper functionality and longevity.
2. Apa yang ada di dalam Kotak
Selepas membuka bungkusan, sila sahkan bahawa semua komponen ada dan tidak rosak:
- 1 x 2D barcode hand scanner, QR code compatible
- 1 x scanner holder
- 1 x cable, USB - RJ45, 2 m
- 1 x Panduan Pemasangan Pantas (QIG)
Image: The DIGITUS 2D Barcode Scanner, shown with its included stand and USB-RJ45 cable. The scanner is dark grey with an orange trigger button.
3. Persediaan
- Sambungkan Kabel: Insert the RJ45 end of the provided cable into the port at the base of the barcode scanner. Ensure it clicks securely into place.
- Sambung ke Peranti Hos: Plug the USB end of the cable into an available USB port on your computer or point-of-sale (POS) system.
- Pemasangan Pemacu (Pasang & Main): The scanner is typically plug-and-play and should be recognized automatically by most operating systems (Windows, macOS, Linux). No specific driver installation is usually required. If prompted, allow the system to install necessary drivers.
- Letakkan Pengimbas: Place the scanner in its holder for hands-free operation, or hold it comfortably for handheld scanning.
- Imbasan Ujian: Open a text editor (e.g., Notepad, Word) or a compatible application. Scan a known barcode. The data should appear in the open application.
4. Arahan Operasi
The DIGITUS 2D Barcode Scanner is designed for ease of use. Follow these steps for effective scanning:
- Hidupkan kuasa: The scanner powers on automatically when connected to a powered USB port. A successful power-on is usually indicated by a short beep and/or a light indicator.
- Bertujuan: Point the scanning window towards the barcode you wish to scan. Ensure the entire barcode is within the scanner's field of view.
- Mengimbas: Press and hold the trigger button (orange button on the handle). A red aiming beam or illumination light will appear. Position the scanner so the aiming beam crosses the center of the barcode.
- Successful Scan: Upon a successful scan, the scanner will emit a short beep and/or the indicator light will flash. The scanned data will be transmitted to your connected device as if typed via a keyboard.
- Bi-Directional Scanning: The scanner supports bi-directional scanning, meaning it can read barcodes regardless of their orientation, improving scanning efficiency.
- QR Code Compatibility: This scanner is fully compatible with QR codes, allowing for versatile data capture.
5. Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your barcode scanner:
- Membersihkan Tetingkap Pengimbasan: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the window.
- Pembersihan Am: Wipe the exterior of the scanner with a soft, dry cloth to remove dust and dirt.
- Penjagaan Kabel: Avoid bending or twisting the USB cable excessively, as this can damage the internal wires.
- Storan: Apabila tidak digunakan, simpan pengimbas di persekitaran yang bersih dan kering, jauh daripada suhu ekstrem dan cahaya matahari langsung.
- Elakkan Titisan: While designed for durability, avoid dropping the scanner, as impact can damage internal components.
6. Penyelesaian masalah
If you encounter issues with your DIGITUS 2D Barcode Scanner, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengimbas tidak dihidupkan. | No power from USB port; loose cable connection. | Ensure USB cable is securely connected to both scanner and host device. Try a different USB port or host device. |
| Pengimbas tidak membaca kod bar. | Barcode damaged/unreadable; incorrect aiming; scanner not configured for barcode type. | Ensure barcode is clear and undamaged. Aim the scanner correctly. Refer to the QIG for advanced configuration options if specific barcode types are not recognized. |
| Data yang diimbas tidak betul atau tidak lengkap. | Partial scan; software/application issue. | Ensure the entire barcode is within the scanning area. Test with a simple text editor to rule out application-specific issues. |
| Scanner beeps but no data appears. | Host device not receiving data; application not in focus. | Ensure the cursor is active in the target input field. Restart the application or host device. |
7. Spesifikasi
Key technical specifications for the DIGITUS 2D Barcode Scanner (Model: DA-81002):
- Dimensi Produk: 1.1 x 9.7 x 6.5 inci
- Berat Barang: 3.88 auns
- Nombor Model Item: DA-81002
- Pengeluar: DIGIT
- Peranti Serasi: Scanner (general purpose)
- Sumber Kuasa: Elektrik Bertali arus (melalui USB)
- Teknologi Ketersambungan: Kabel USB
- Kadar Imbasan: 200 fps (bingkai sesaat)
- Keserasian Kod Bar: 1D and 2D barcodes, including QR Code
- Panjang kabel: 2 meters (USB - RJ45)
8. Waranti dan Sokongan
For warranty information and technical support, please refer to the Quick Installation Guide (QIG) included in your product package or visit the official Digitus webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
For further assistance, you may contact Digitus customer support through their official channels. Details are typically provided in the product documentation or on the manufacturer's webtapak.
