Segotep 657768584329

Segotep PC Power Button Extension Cable User Manual

Model: 657768584329

Produk Selesaiview

The Segotep PC Power Button On/Off Reset HDD Button Extension Cable provides a convenient external control solution for your desktop computer. This device allows you to power on/off, reset your PC, and monitor hard drive activity from a remote location, eliminating the need to reach for the computer case's built-in buttons. It features a 5.3-foot cable, making it suitable for various setups, including offices, homes, internet cafes, and multimedia classrooms.

Segotep PC Power Button Extension Cable with blue LED light

Image: The Segotep PC Power Button Extension Cable, featuring a prominent blue LED power button, a smaller reset button, and the various motherboard connector cables.

Ciri-ciri utama termasuk:

Panduan Pemasangan

Follow these steps carefully to install your Segotep PC Power Button Extension Cable. Ensure your computer is powered off and unplugged from the wall outlet before beginning installation.

  1. Sediakan Casis: Remove a chassis expansion slot baffle from the back of your computer case. The specific baffle to remove may vary depending on your computer case design.

    Step 1: Removing a chassis expansion slot baffle

    Image: Illustration showing the removal of a metal expansion slot cover from the back of a PC case.

  2. Sambung ke Papan Induk: Carefully connect the I/O connector cables from the extension switch through the expansion slot to the corresponding FPANEL port on your motherboard. Refer to your motherboard's manual for the exact pinout of the front panel header (FPANEL).

    Motherboard front panel connector pinout diagram

    Image: Diagram showing the various front panel connectors (POWER LED+, POWER LED-, POWER SW, RESET SW, H.D.D LED+) and a close-up of a motherboard's FPANEL header.

    The cable includes a metal sleeve designed to sit securely in the card-slot cover, preventing accidental pulling or disconnection from the motherboard, thus ensuring safety and stability.

  3. Selamatkan Kabel: Fix the buckle in the middle of the cable to the groove of the cable fixing baffle. This helps manage the cable and keeps it tidy.

  4. Install Fixing Baffle: Install the cable fixing baffle to the corresponding expansion slot and secure it with screws. This holds the cable firmly in place at the back of the case.

  5. Penempatan Akhir: Position the external power button unit in a convenient location on your desk or workspace. The 5.3-foot cable provides amppanjang le untuk penempatan yang fleksibel.

    Segotep PC Power Button Extension Cable placed on a desk next to a monitor

    Image: The external power button unit positioned on a desk, demonstrating its use in a typical computer setup.

Operasi

Operating the Segotep PC Power Button Extension Cable is straightforward:

Finger pressing the power button on the extension cable

Image: A hand pressing the illuminated blue power button on the Segotep extension cable.

Penyelenggaraan

The Segotep PC Power Button Extension Cable requires minimal maintenance to ensure its longevity and proper function:

Menyelesaikan masalah

If you encounter issues with your Segotep PC Power Button Extension Cable, refer to the following common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Computer does not power on/off when button is pressed.
  • Incorrect connection to motherboard.
  • Sambungan longgar.
  • Motherboard front panel header issue.
  • Verify that the "POWER SW" connector is correctly plugged into the motherboard's power switch pins. Consult your motherboard manual for the correct pinout.
  • Ensure all connectors are firmly seated.
  • Test the motherboard's front panel header with the original case power button if available, or by momentarily shorting the power pins with a screwdriver (only if comfortable and knowledgeable).
Blue LED does not light up.
  • Incorrect "POWER LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "POWER LED+" and "POWER LED-" connectors are correctly plugged into the motherboard's power LED pins.
  • If the LED does not light up, try reversing the "POWER LED+" and "POWER LED-" connectors, as LEDs are polarity sensitive.
Red LED (HDD activity) does not flicker.
  • Incorrect "H.D.D LED" connection.
  • Reversed polarity of LED connector.
  • Check that the "H.D.D LED+" and "H.D.D LED-" connectors are correctly plugged into the motherboard's HDD LED pins.
  • If the LED does not light up, try reversing the "H.D.D LED+" and "H.D.D LED-" connectors.
Reset button does not work.
  • Incorrect "RESET SW" connection.
  • Sambungan longgar.
  • Verify that the "RESET SW" connector is correctly plugged into the motherboard's reset switch pins.
  • Ensure the connector is firmly seated.

Spesifikasi

JenamaSegotep
Nombor Model657768584329
Jenis PenyambungStandard Front Panel Connectors (Power SW, Reset SW, Power LED, HDD LED)
Panjang Kabellebih kurang 5.3 kaki (1.6 meter)
Peranti SerasiDesktop PCs, Computer Cases
Penunjuk LEDBlue (Power), Red (HDD Activity)
Dimensi Produk (L x W x H)5.51 x 4.72 x 1.97 inci
Berat Barang5 auns
Vol Maksimumtage12 Volt (DC)

Waranti dan Sokongan

Segotep products are designed for reliability and performance. This product is covered by a Waranti 5 tahun, reflecting Segotep's commitment to quality and customer satisfaction.

For technical support, troubleshooting assistance, or warranty claims, please contact Segotep customer service through their official webtapak atau peruncit tempat anda membeli produk tersebut. Sila sediakan nombor model anda (657768584329) dan maklumat pembelian semasa menghubungi sokongan.

For more information about Segotep and their products, you can visit the official Segotep store on Amazon: Segotep Amazon Store.

Dokumen Berkaitan - 657768584329

Praview Segotep Slath Mini PC Case Assembly and Usage Guide
Essential tips and step-by-step instructions for assembling and using the Segotep Slath Mini PC case, covering prohibited uses and proper installation procedures.
Praview Segotep Phoenix T1 PC Case Installation Guide
Detailed installation instructions for the Segotep Phoenix T1 PC case, covering fan, radiator, storage, and cable management setup.
Praview Panduan Pemasangan Sarung PC Segotep KL-Aeolus
Manual pemasangan yang komprehensif untuk sarung PC Segotep KL-Aeolus, memperincikan langkah untuk kipas, penyejuk cecair, papan induk, PSU dan pemasangan kad grafik.
Praview Segotep Gold Power Supply User Manual
User manual for Segotep Gold Power Supplies, covering installation, features, Q&A, and specifications for 750W, 850W, 1250W, 1600W, 2000W, and 750W SFX models.