Manual Pengguna Penghancur Potong Silang Suapan Auto GBC ShredMaster AUTO+ 50X

pengenalan

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.

The GBC ShredMaster AUTO+ 50X is designed for shredding paper documents and credit cards, offering a P-4 security level for confidential information. It features both automatic and manual feed options for convenience.

Maklumat Keselamatan

• Keep hands, hair, and loose clothing away from the paper entry slot.
• Jauhkan kanak-kanak dan haiwan peliharaan dari mesin pencincang.
• Do not spray any flammable products onto the shredder or use near flammable materials.
• Cabut palam mesin pencincang sebelum mengalihkan, membersihkan atau mengosongkan tong sampah.
• Do not shred metal objects, large paper clips, or adhesive labels as these can damage the cutting mechanism. Small paper clips and staples are generally acceptable for this model.
• Operate the shredder on a flat, stable surface.

Persediaan

1. Membongkar: Carefully remove the shredder from its packaging. Ensure all packing materials are removed from around the shredder and inside the waste bin.
2. penempatan: Position the shredder on a level, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
3. Sambungan Kuasa: Palamkan kord kuasa ke soket elektrik standard.
4. Tong Sampah: Ensure the waste bin is correctly inserted into the shredder housing. The shredder will not operate if the bin is not properly seated.

Arahan Operasi

Panel Kawalan Terlaluview

The control panel features intuitive touch controls for easy operation.

Automatic Feed Operation

The AUTO+ 50X features an automatic feed tray for shredding up to 50 sheets of 80 gsm paper at once.

1. Pastikan mesin pencincang dipasang dan tong sampah dimasukkan dengan betul.
2. Lift the automatic feed tray cover.
3. Stack up to 50 sheets of paper neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
4. Close the automatic feed tray cover. The shredder will automatically detect the paper and begin shredding.

Operasi Suapan Manual

For smaller quantities of paper (up to 6 sheets of 80 gsm) or credit cards, use the manual feed slot.

1. Pastikan mesin pencincang dipasang dan tong sampah dimasukkan dengan betul.
2. Insert paper or a credit card into the manual feed slot. The shredder will automatically start and stop.
3. Untuk kad kredit, masukkan satu kad pada satu masa ke dalam slot yang ditetapkan.

Perlindungan Terlalu Panas

To prevent motor overheating, the shredder is equipped with an automatic thermal overload protection system. After approximately 10 minutes of continuous shredding, the machine will automatically rest for 45 minutes to cool down. During this cool-down period, the shredder will not operate. Resume operation once the cool-down period is complete.

Penyelenggaraan

Mengosongkan Tong Sampah

The shredder features an easy-to-empty 20-liter pull-out bin with a viewing window to monitor fill levels.

1. Unplug the shredder from the power outlet.
2. Tarik keluar tong sampah dari bahagian hadapan mesin pencincang.
3. Empty the shredded material into a suitable receptacle.
4. Slide the waste bin back into the shredder until it is securely seated.
5. Pasangkan semula mesin pencincang ke soket kuasa.

Oiling the Shredder

Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol oils).

1. Apply a thin line of shredder oil across the paper entry slot.
2. Run the shredder in reverse for 10 seconds to distribute the oil.
3. Repeat this process after every 30 minutes of accumulated shredding or at least twice a month.

Pembersihan

Lap bahagian luar mesin pencincang dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut yang kasar.

Menyelesaikan masalah

Spesifikasi

• model: G2020050X
• Jenis Carik: Potong Lintang
• Tahap keselamatan: P-4 (DIN 66399)
• Saiz cincang: 4 x 28 mm confetti cut
• Auto Feed Capacity: 50 helai (80 gsm)
• Kapasiti Suapan Manual: 6 helai (80 gsm)
• Carik: Paper, small paper clips, staples, credit cards
• Kapasiti tong: 20 Liter
• Masa Larian: 10 minutes continuous, 45 minutes cool-down
• Approximate Dimensions (H x W x D): 40.6 cm x 43.2 cm x 38.1 cm (16" H x 17" W x 15" D, based on product images)
• Berat: 11.6 kg
• Sumber Kuasa: Elektrik Bertali
• Ciri Khas: Automatic Start/Stop, Jam Proof

Waranti dan Sokongan

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official GBC webtapak. Simpan bukti pembelian anda untuk tuntutan waranti.

For further assistance, you may contact GBC customer service through their official channels. Details are typically available on the manufacturer's webtapak atau pembungkusan produk.