aigo AZ300 Mid Tower Computer Case User Manual

1. Pengenalan

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Maklumat Keselamatan

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Jauhkan bahagian kecil dan skru daripada kanak-kanak.
• Pastikan pembumian yang betul untuk mengelakkan bahaya elektrik.

3. Produk Lebihview

3.1 Panel I/O Hadapan

The front I/O panel provides convenient access to essential ports and controls.

Rajah 2: Susun Atur Panel I/O Hadapan

• Pelabuhan Jenis-C: 1x USB Type-C port for modern connectivity.
• Port USB 2.0: 1x USB 2.0 port for peripheral connections.
• Port USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Butang Kuasa: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Keserasian Papan Induk: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Panjang GPU: Maximum GPU length of 400mm.
• Panjang PSU: Supports standard ATX power supplies up to 200mm.

4. Panduan Pemasangan

4.1 Menyediakan Kes

1. Letakkan bekas di atas permukaan yang rata dan stabil.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Rajah 4: Bahagian Belakang View of Case

4.2 Pemasangan Motherboard

1. Pasang pelindung I/O (jika belum dipasang terlebih dahulu) ke dalam bukaan belakang bekas.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Selamatkan papan induk dengan skru yang disediakan.

Figure 5: Motherboard Mounting Areas

4.3 Pemasangan Unit Bekalan Kuasa (PSU)

1. Cari kawasan pelekap PSU di bahagian bawah belakang kes itu.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Pemasangan Pemacu Storan

1. SSD 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. HDD 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Pemasangan Kad Pengembangan (GPU)

1. Tanggalkan penutup slot pengembangan yang diperlukan dari bahagian belakang bekas.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Selamatkan kad dengan skru.

4.6 Cooling System Installation

The aigo AZ300 supports flexible cooling configurations.

• Sokongan Peminat: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Sokongan Radiator: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Pengurusan Kabel

Gunakan potongan penghalaan kabel dan titik pengikat di belakang dulang papan induk untuk menguruskan kabel bagi aliran udara dan estetika yang lebih baik.

5. Operasi

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Penyelenggaraan

Penyelenggaraan yang kerap membantu memastikan prestasi optimum dan jangka hayat komponen komputer anda.

6.1 Pembersihan Penapis Habuk

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Penapis Habuk PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Penyelesaian masalah

• Sistem tidak dapat dihidupkan: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Tiada paparan: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Terlalu panas: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• Port USB tidak berfungsi: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Spesifikasi

9. Waranti dan Sokongan

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webtapak.