Ingco RH150068 Hammer Drill Instruction Manual

pengenalan

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your Ingco RH150068 Hammer Drill. Please read this manual thoroughly before using the tool to ensure proper and safe usage. Keep this manual for future reference.

Arahan Keselamatan Am

Sentiasa ikuti langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.

• Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
• Keselamatan Elektrik: Palam alat kuasa mesti sepadan dengan alur keluar. Jangan sekali-kali mengubah suai palam dalam apa jua cara. Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan seperti paip, radiator, julat dan peti sejuk.
• Keselamatan Diri: Always wear eye protection. Use hearing protection when operating the hammer drill. Dress properly; do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan palam daripada sumber kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
• Perkhidmatan: Minta alat kuasa anda diservis oleh pembaikan bertauliah dengan hanya menggunakan alat ganti yang sama. Ini akan memastikan keselamatan alat kuasa dikekalkan.

Produk Selesaiview

The Ingco RH150068 is a robust corded electric hammer drill designed for demanding drilling tasks. It features a 1500-watt motor and a 32mm drilling capacity.

Figure 1: Ingco RH150068 Hammer Drill. This image displays the main unit of the corded electric hammer drill, typically featuring its multi-color housing, ergonomic handle, and the keyless chuck mechanism.

Komponen yang Disertakan:

• Ingco RH150068 Hammer Drill Unit
• Kunci Chuck
• Sarung Bawa

Persediaan

1. Membongkar

Carefully remove the hammer drill and all accessories from the carry case. Inspect the tool for any signs of damage that may have occurred during shipping. Do not use the tool if it appears damaged.

2. Memasang Aksesori

The RH150068 features a keyless chuck. To insert a drill bit:

1. Rotate the chuck collar counter-clockwise until the jaws are open wide enough to accept the drill bit.
2. Masukkan mata gerudi sepenuhnya ke dalam chuck.
3. Rotate the chuck collar clockwise to tighten the jaws securely around the drill bit. Ensure the bit is centered and firmly held.

Note: Although the product description mentions "Chuck Key" as an included component, the specification states "Keyless Chuck". For this manual, we will assume the "Keyless Chuck" specification is correct for operation, and the "Chuck Key" might be for another accessory or a general listing error. If it were a keyed chuck, the key would be used to tighten.

3. Sambungan Kuasa

Ensure the power switch is in the "OFF" position before plugging the tool into a power outlet. Connect the corded electric hammer drill to a standard 220V power supply. Use an appropriate extension cord if necessary, ensuring it is rated for the tool's power requirements (1500 Watts).

Arahan Operasi

1. Bermula dan Berhenti

• Untuk memulakan alat, tekan suis picu.
• Untuk menghentikan alat, lepaskan suis pencetus.
• For continuous operation, press the trigger and then press the lock-on button (if available). To release, press the trigger again.

2. Drilling Modes

The Ingco RH150068 features hammer functionality for drilling into masonry and concrete, and a rotation-only mode for drilling into wood, metal, or plastics.

• Penggerudian Tukul: Select the hammer icon on the mode selector switch for drilling into hard materials. This mode combines rotation with a hammering action.
• Penggerudian Rotary: Select the drill bit icon on the mode selector switch for standard drilling without hammering.

3. Reverse Rotation

The tool is equipped with a reverse rotation feature, useful for removing jammed drill bits or driving/removing screws (though screw functionality is listed as 'No' in product description, the reverse function is present). The direction of rotation is controlled by a switch, usually located near the trigger.

• Push the switch to the left for forward (clockwise) rotation.
• Tolak suis ke kanan untuk putaran undur (lawan arah jam).

Caution: Always ensure the tool has come to a complete stop before changing the direction of rotation.

Penyelenggaraan

Penyelenggaraan tetap memastikan jangka hayat dan prestasi optimum gerudi tukul anda.

1. Pembersihan

• After each use, clean the tool with a soft cloth to remove dust and debris.
• Do not use water or chemical cleaning agents, as these can damage the tool's electrical components.
• Periodically clean the ventilation openings to prevent overheating.

2. Penyimpanan

• Store the hammer drill in its original carry case in a dry, secure location, out of reach of children.
• Lindungi kord kuasa daripada kerosakan semasa penyimpanan.

3. Pelinciran

This tool is designed for maintenance-free operation regarding internal lubrication. Do not attempt to lubricate internal components unless specified by a qualified service technician.

Menyelesaikan masalah

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Ingco customer support or an authorized service center.

Spesifikasi

Waranti dan Sokongan

Ingco products are manufactured to high-quality standards. For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official Ingco webtapak. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.

For further assistance, please contact Ingco customer service.