Manual Pengguna Loceng Pintu Tanpa Wayar SECRUI

1. Produk Lebihview

The SECRUI Wireless Doorbell system provides a convenient and reliable solution for home and office entry notification. This system includes a plug-in receiver and two waterproof push buttons (transmitters), offering a wide operating range and multiple customization options.

Image 1: SECRUI Wireless Doorbell System Components

Ciri-ciri Utama:

• Julat Tanpa Wayar: Up to 1000 feet (300 meters) in open areas.
• Lonceng: 58 melodi yang boleh dipilih.
• Tahap Kelantangan: 5 adjustable levels, including mute mode, up to 120dB.
• Rintangan Cuaca: IP55 rated push buttons, operational from -4°F to 140°F (-20°C to 60°C).
• Fungsi Memori: Retains last selected chime and volume settings after power loss.
• Penunjuk LED: Visual alert on both receiver and push button.

2. Kandungan Pakej

Sahkan bahawa semua komponen terdapat dalam pakej anda:

• 1 x Plug-in Receiver
• 2 x Push Button (Transmitter, battery included)
• 2 x Pita Pelekat
• 4 x Skru
• 4 x Sauh
• 1 x Manual Pengguna

3. Maklumat Keselamatan

Arahan Keselamatan Penting:

• Always follow the manufacturer's advice when using power tools and wear suitable protective equipment (e.g., safety goggles) when drilling holes.
• Sebelum menggerudi lubang di dinding, periksa kabel elektrik dan paip air yang tersembunyi. Penggunaan pengesan kabel/paip adalah dinasihatkan jika ragu-ragu.
• Ensure the receiver is plugged into a 120 Volts AC outlet.

4. Persediaan dan Pemasangan

The SECRUI Wireless Doorbell is designed for easy installation. No complex wiring is required.

4.1 Pemasangan Penerima

1. Pasangkan: Insert the plug-in receiver into a standard 120V AC electrical outlet in your desired location. Ensure the outlet is easily accessible and not obstructed.
2. Hidupkan kuasa: The receiver will power on and emit a default chime.

Image 2: Easy Receiver and Push Button Setup

4.2 Push Button (Transmitter) Installation

The push button can be installed using either adhesive tape or screws.

Image 3: DIY Installation Options (Adhesive and Screw Mounting)

1. Pilih Lokasi: Select a flat, clean surface near your door. Ensure the location is within the 1000ft wireless range of the receiver.
2. Pemasangan pelekat:
   • Clean the mounting surface thoroughly to remove dust and debris.
   • Peel off one side of the double-sided adhesive tape and attach it to the back of the push button.
   • Peel off the other side of the tape and firmly press the push button onto the desired surface for at least 30 seconds.
3. Pemasangan skru:
   • Open the push button casing (refer to the diagram in the manual for specific instructions on opening).
   • Mark the positions for the screw holes on the wall.
   • Drill pilot holes if necessary and insert the anchors.
   • Secure the back plate of the push button to the wall using the provided screws.
   • Reattach the front cover of the push button.

The push button is designed to be waterproof (IP55 rated) and can withstand various weather conditions, including rain, snow, and extreme temperatures from -4°F to 140°F.

Image 4: Weather Resistance of the Push Button

5. Arahan Operasi

5.1 Changing Chimes

1. Cycle Through Chimes: Press the "Chime Selection" button on the receiver to cycle through the 58 available melodies.
2. Pilih Loceng: Stop pressing the button when you hear your desired chime.
3. Berpasangan (jika perlu): If the chime does not play when the push button is pressed after selection, you may need to re-pair the push button with the receiver. (See Section 5.4 for pairing instructions).

Image 5: Chime and Volume Controls

5.2 Melaraskan Kelantangan

1. Butang Kelantangan: Press the "Volume" button on the receiver to adjust the sound level. There are 5 levels, ranging from mute (0dB) to maximum (120dB).
2. Mod Bisu: Continue pressing the volume button until the mute icon is displayed or the sound is off. This is useful for situations like a sleeping baby or during classes.

Image 6: Volume and Mute Mode Options

5.3 Penunjuk LED

Both the receiver and the push button feature an LED indicator. When the push button is pressed, its LED will light up, and the receiver's LED will flash, providing a visual alert in addition to the chime.

5.4 Pairing Additional Push Buttons or Re-pairing

Your doorbell system comes pre-paired. If you need to pair additional push buttons or re-pair existing ones:

1. Masukkan Mod Berpasangan: Press and hold the "Volume" button on the receiver for approximately 5 seconds until the receiver emits a "ding" sound and its LED indicator flashes rapidly. This indicates it's in pairing mode.
2. Activate Push Button: Within 10 seconds, press the push button you wish to pair. The receiver will chime to confirm successful pairing.
3. Keluar daripada Mod Berpasangan: The receiver will automatically exit pairing mode after 10 seconds if no button is pressed, or you can press any button on the receiver to exit.

The system supports pairing multiple push buttons to one receiver, and multiple receivers to one push button.

6. Penyelenggaraan

6.1 Pembersihan

Wipe the doorbell receiver and push buttons with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.

6.2 Battery Replacement (Push Button)

The push button uses a CR2032 lithium battery, which typically lasts for about 3 years. When the push button's LED indicator no longer lights up when pressed, or the range decreases significantly, it's time to replace the battery.

Image 7: 3-Year Battery Life

1. Buka Casing: Carefully open the back cover of the push button using a small screwdriver or coin.
2. Keluarkan Bateri Lama: Keluarkan bateri CR2032 lama.
3. Masukkan Bateri Baharu: Masukkan bateri CR2032 baharu dengan bahagian positif (+) menghadap ke atas.
4. Tutup Casing: Snap the back cover firmly back into place.

Buang bateri lama mengikut peraturan tempatan.

7. Penyelesaian masalah

Image 8: Wireless Range Illustration

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, please refer to the documentation included with your product or visit the official SECRUI website. If you encounter any issues or have questions regarding your SECRUI Wireless Doorbell, please contact SECRUI customer support for assistance.

SECRUI Official Store: Visit SECRUI Store on Amazon