pengenalan
The Newland HR52 Bonito is a high-performance 2D CMOS Mega Pixel Handheld Reader designed for retail environments. This device is capable of reading various 1D and 2D barcodes, including DotCode, and features an autosense function for efficient operation. It connects via a 3-meter coiled USB cable, ensuring reliable data transmission to compatible devices such as laptops and desktops.
Rajah 1: The Newland HR52 Bonito Handheld Reader. This image shows the black handheld scanner with a yellow trigger button, connected by a coiled USB cable. The Newland logo is visible on the side of the device.
Persediaan
Follow these steps to set up your Newland HR52 Bonito Handheld Reader:
- Buka bungkusan Peranti: Carefully remove the HR52 Bonito reader and its coiled USB cable from the packaging.
- Sambung ke Peranti Hos: Insert the USB connector of the coiled cable into an available USB port on your laptop or desktop computer.
- Pemasangan Pemacu (Pasang & Main): The device is typically plug-and-play. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete.
- Sahkan Sambungan: Once connected, the scanner may emit a short beep or an indicator light may illuminate, signifying it is ready for use.
No additional power adapter is required as the device is powered via the USB connection (Operating Voltage: 5 Volt).
Arahan Operasi
The HR52 Bonito is designed for intuitive operation. Here's how to use it:
- Mengimbas Kod Bar:
- Point the scanning window of the reader towards the barcode you wish to scan.
- Press and hold the yellow trigger button located on the handle. A red aiming beam or illumination will appear.
- Position the aiming beam over the center of the barcode.
- Once the barcode is successfully read, the scanner will typically emit a beep and/or an indicator light will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Autosense Mode: The HR52 Bonito supports an autosense feature. When enabled, the scanner can automatically detect a barcode presented within its field of view without requiring the trigger button to be pressed. This is ideal for hands-free operation using an optional stand (not included).
- Kod Bar yang Disokong: This reader supports a wide range of 1D and 2D symbologies, including but not limited to UPC/EAN, Code 39, Code 128, QR Code, Data Matrix, PDF417, and DotCode.
Penyelenggaraan
Proper maintenance ensures the longevity and optimal performance of your HR52 Bonito reader:
- Membersihkan Tetingkap Pengimbasan:
- Ensure the device is disconnected from the power source (USB port) before cleaning.
- Gunakan kain lembut yang tidak berbulu dampdisapu dengan air atau pembersih yang lembut dan tidak melelas.
- Gently wipe the scanning window to remove dust, smudges, or debris. Avoid excessive moisture.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic and optical components.
- Pembersihan Am: Lap bahagian luar peranti dengan kain lembut dan kering.
- Penjagaan Kabel: Elakkan selekoh tajam atau tarikan berlebihan pada kabel USB untuk mengelakkan kerosakan wayar dalaman.
- Storan: Store the reader in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Menyelesaikan masalah
If you encounter issues with your HR52 Bonito reader, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pengimbas tidak dapat dihidupkan atau bertindak balas. | Kabel USB tidak disambungkan dengan betul atau port USB rosak. | Ensure the USB cable is securely plugged into both the scanner and the computer. Try a different USB port on your computer. |
| Scanner reads some barcodes but not others. | Barcode type not enabled, damaged barcode, or poor print quality. | Verify the barcode is not damaged. Ensure the specific barcode symbology is enabled in the scanner's configuration (refer to advanced programming guide if available). Try scanning a known good barcode. |
| Data yang diimbas tidak betul atau tidak lengkap. | Incorrect scanner configuration or software issue on host computer. | Check the input settings of the application receiving the data. Ensure the scanner's output format matches the expected input. Restart the computer. |
| Autosense mode not working. | Autosense feature disabled or scanner not positioned correctly. | Ensure the autosense feature is enabled (if applicable, via programming barcodes). Position the scanner on a stable surface with the scanning window facing upwards, allowing barcodes to be presented to it. |
For further assistance, please contact Newland customer support.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | HR5280RT-SF |
| Dimensi Produk | 1.1 x 9.7 x 6.5 inci |
| Teknologi Ketersambungan | USB Cable (3 mtr. coiled) |
| Sumber Kuasa | Elektrik Bertali (berkuasa USB) |
| Vol Operasitage | 5 Volt |
| Peranti Serasi | Laptop, Desktop |
| Teknologi Pengimbasan | 2D CMOS Mega Pixel |
| Ciri Khas | DotCode Enabled, Autosense |
| Pengeluar | Tanah baru |
Waranti dan Sokongan
For warranty information and technical support, please refer to the official Newland webtapak atau hubungi pengedar tempatan anda. Simpan resit pembelian anda sebagai bukti pembelian untuk tuntutan waranti.
Newland Contact Information: www.newland-id.com