pengenalan
This manual provides essential information for the safe and efficient operation and maintenance of your Pedrollo PKm60 Peripheral Booster Water Pump. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent injury or damage.
The Pedrollo PKm60 pump is designed for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the pump's materials. It is ideal for domestic use, including water distribution in combination with small pressure sets and for garden and allotment irrigation. For optimal performance and longevity, the pump should be installed in an enclosed environment or at least sheltered from inclement weather.
Maklumat Keselamatan
AMARAN: Failure to follow these safety instructions could result in electric shock, fire, serious injury, or death.
- Always disconnect the pump from the power supply before performing any installation, maintenance, or repair work.
- Ensure the electrical installation complies with all local and national electrical codes. The pump requires a 220V 60Hz power supply.
- The pump must be properly grounded to prevent electric shock.
- Jangan kendalikan pam jika kord kuasa atau palam rosak.
- Do not pump flammable, explosive, or corrosive liquids. This pump is designed for clean water only.
- Protect the pump from freezing temperatures. Freezing water inside the pump can cause severe damage.
- Pastikan pengudaraan yang mencukupi di sekeliling pam untuk mengelakkan terlalu panas.
- Jauhkan kanak-kanak dan orang yang tidak dibenarkan daripada pam semasa operasi.
- For complex installations or if you are unsure, consult a qualified electrician or plumber.
Produk Selesaiview
The Pedrollo PKm60 is a reliable peripheral booster pump designed for efficient water handling in domestic applications. Its compact design and robust construction ensure long-term performance.
Rajah 1: Bahagian hadapan view of the Pedrollo PKm60 Peripheral Booster Water Pump. The pump is blue with a black motor housing and a red pressure relief valve. It features a 1-inch NPT inlet and outlet.
Ciri-ciri Utama:
- Jenis Cecair: Air bersih
- Permohonan: Water supply systems, pressure systems, irrigation pumps
- Tipologi: Pam permukaan
- Keluarga: persisian
- Julat Prestasi: Kadar aliran sehingga 11 GPM, Kepala sehingga 130 kaki.
- Temperature of Liquid: -10 °C hingga +60 °C
- Suhu Ambien: Up to +40 °C (+50 °C for PK 60)
- Angkat Sedutan Manometrik: Sehingga 8 m
- Tekanan Kerja: 6 bar for PK 60
- Kuasa: 0.5 HP
- Sambungan: 1 inch x 1 inch NPT
Persediaan dan Pemasangan
Proper installation is crucial for the pump's performance and longevity. It is recommended that installation be performed by a qualified professional.
- lokasi: Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. An enclosed environment is ideal.
- Pemasangan: Securely mount the pump on a stable, level surface using appropriate fasteners. Ensure there is sufficient space around the pump for ventilation and maintenance access.
- Sambungan Paip:
- Connect the suction pipe to the pump's inlet (typically marked "IN" or with an arrow pointing towards the pump). Ensure the suction pipe is airtight to prevent air leaks, which can cause the pump to lose prime.
- Connect the discharge pipe to the pump's outlet (typically marked "OUT" or with an arrow pointing away from the pump).
- Use appropriate fittings (1 inch NPT) and sealants to ensure leak-free connections. Avoid putting strain on the pump's connections from the piping.
- Pasang injap kaki dengan penapis di hujung paip sedutan di sumber air untuk mengelakkan serpihan daripada memasuki pam dan untuk mengekalkan suhu utama.
- Sambungan Elektrik:
- Ensure the power supply matches the pump's requirements (220V 60Hz).
- Connect the pump to a dedicated circuit protected by a circuit breaker or fuse of appropriate rating.
- Sahkan pembumian yang betul untuk mengelakkan bahaya elektrik.
- Menyuburkan Pam: Before initial operation, the pump must be primed.
- Remove the priming plug (usually located on the top of the pump casing).
- Isi pam casing sepenuhnya dengan air bersih sehingga melimpah.
- Gantikan palam penyebuan dengan selamat.
- Open any valves on the suction and discharge lines.
Arahan Operasi
Setelah dipasang dan disepadukan, pam sedia untuk digunakan.
- Permulaan permulaan: After priming, connect the pump to the power supply. The pump should start immediately and begin pumping water.
- Pemantauan:
- Observe the pump during the first few minutes of operation for any unusual noises, vibrations, or leaks.
- Check the pressure gauge (if installed) to ensure the pump is operating within its specified working pressure range (6 bar for PK 60).
- Ensure a steady flow of water. If the pump runs without delivering water, shut it off immediately to prevent damage from dry running. Re-prime the pump.
- Operasi Berterusan: The pump is designed for continuous duty within its specified performance limits. Avoid operating the pump outside these limits.
- Menutup: To turn off the pump, disconnect it from the power supply. If the pump will be out of use for an extended period, especially in cold weather, follow the winterization procedures in the Maintenance section.
Penyelenggaraan
Regular maintenance ensures the longevity and efficient operation of your Pedrollo pump.
- Pemeriksaan Berkala: Periksa pam secara berkala untuk sebarang tanda kebocoran, kakisan atau kerosakan pada pam.asing or electrical components.
- Kebersihan: Keep the pump and its surroundings clean and free from debris. Ensure ventilation openings are not obstructed.
- Injap Kaki/Penapis: Inspect and clean the foot valve and strainer regularly to prevent blockages and ensure unrestricted water flow into the pump.
- Musim sejuk (untuk iklim sejuk): If the pump is installed in an area subject to freezing temperatures and will not be used, it must be drained to prevent damage.
- Putuskan sambungan kuasa ke pam.
- Open the drain plug (if present) or disconnect the suction and discharge pipes to allow all water to drain from the pump casing dan paip.
- Store the pump in a warm, dry place if possible, or ensure it is completely dry before reassembly.
- Servis profesional: For any internal repairs or complex issues, contact a qualified service technician. Do not attempt to disassemble the motor or pump head beyond basic maintenance.
Menyelesaikan masalah
This section outlines common issues and their potential solutions. Always disconnect power before troubleshooting.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Pam tidak bermula. | No power, tripped circuit breaker, faulty wiring, seized impeller. | Check power supply, reset breaker, inspect wiring (by qualified person), check for obstructions in impeller. |
| Pam berjalan tetapi tiada air atau aliran air perlahan. | Pump not primed, air leak in suction line, clogged foot valve/strainer, low water level in source, discharge valve closed. | Re-prime pump, check suction line for leaks, clean foot valve/strainer, ensure adequate water in source, open discharge valve. |
| Pam bising atau bergetar secara berlebihan. | Air in pump/suction line, cavitation, loose mounting, worn bearings. | Re-prime pump, check for air leaks, ensure adequate water supply, tighten mounting bolts, contact service for bearing issues. |
| Pam kerap hidup dan mati. | Pressure switch malfunction, small leak in system, waterlogged pressure tank (if applicable). | Inspect pressure switch, check for leaks in plumbing, inspect pressure tank. |
Spesifikasi
Detailed technical specifications for the Pedrollo PKm60 Peripheral Booster Water Pump.
| Parameter | Nilai |
|---|---|
| Nombor Model | PKm60220 |
| Pengeluar | PEDROLLO |
| Jenis Cecair | Air bersih |
| Sumber Kuasa | AC/DC (220V 60Hz) |
| Kuasa kuda | 0.5 HP |
| Kadar Aliran (Maks) | 11 GPM (Gelen Per Minit) |
| Head (Max) | 130 kaki |
| Julat Suhu Cecair | -10 °C hingga +60 °C |
| Ambient Temperature (Max) | +40 °C (+50 °C for PK 60) |
| Manometric Suction Lift (Max) | 8 m |
| Working Pressure (PK 60) | 6 bar |
| Sambungan Inlet / Outlet | 1 inch x 1 inch NPT |
| Berat Barang | 13 paun |
| Dimensi Produk | 12 x 8 x 8 inci |
Figure 2: Performance curves illustrating the relationship between Head (ft.) and Flow rate (GPM) for Pedrollo PKm60 and PKm65 pumps. The PKm60 curve shows a maximum flow rate of approximately 11 GPM at 20 ft. head and a maximum head of 130 ft. at 0 GPM.
Waranti dan Sokongan
Warranty information for your Pedrollo PKm60 pump is typically provided at the time of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions.
For technical support, spare parts, or service inquiries, please contact Pedrollo customer service or an authorized Pedrollo dealer. Ensure you have your pump's model number (PKm60220) and serial number (if applicable) ready when contacting support.
