PINEWORLD E202Tuya

Manual Pengguna PINEWORLD E202 Tuya WiFi dan Bluetooth Smart Lock

Model: E202Tuya

Produk Selesaiview

The PINEWORLD E202 Tuya Smart Lock offers multiple unlocking methods including fingerprint, keypad, IC card, and mechanical key, with additional control via the Tuya mobile application. Designed for enhanced security and convenience in residential and commercial settings, this lock features a reversible handle and robust metal construction.

PINEWORLD E202 Smart Lock with phone showing app interface

Image: PINEWORLD E202 Smart Lock with a smartphone displaying the Tuya app interface, highlighting remote access capabilities.

Ciri-ciri Utama

Diagram showing features of PINEWORLD E202 Smart Lock

Image: Detailed diagram illustrating the key features of the smart lock, including IC card area, doorbell, fingerprint recognition, door handle, Micro-USB port, anti-collision panel, and mechanical key slot.

Apa yang ada dalam Pakej

Pastikan semua komponen ada sebelum memulakan pemasangan.

Contents of the PINEWORLD E202 Smart Lock package

Image: All components included in the smart lock package, laid out neatly.

Panduan Pemasangan

This section provides step-by-step instructions for installing your PINEWORLD E202 Smart Lock. For visual guidance, please refer to the installation video below.

Video: Official installation guide for the E202 Smart Lock, demonstrating each step from unboxing to final setup.

Langkah Pra-Pemasangan

  1. Prepare Door for Drilling: Ensure your door is prepared according to the 5052 drilling template.
    Drill holes according to 5052 drilling template

    Image: Diagram showing the required drill hole measurements and positions for the smart lock installation.

  2. Adjust Deadbolt Direction: The deadbolt direction needs to be adjusted based on your door's opening direction.
    • Pull the picks up.
    • Press the latch bolt to the bottom.
    • Revolve the latch bolt 180 degrees then release.
    Steps to adjust the direction of the deadbolt

    Image: Visual guide on how to adjust the deadbolt direction for proper installation.

  3. Confirm Door Open Direction: Determine if your door is a "Left-in" or "Right-in" door to ensure correct handle orientation.
    Diagram showing left-in door and right-in door configurations

    Image: Illustration distinguishing between left-in and right-in door types for handle adjustment.

  4. Check Door Thickness: The lock is suitable for doors with a thickness of 30-100mm. If your door thickness is over 50mm, please contact customer support.

Langkah Pemasangan Utama

  1. Install the Front Lock Panel: Carefully align and insert the front lock panel into the prepared holes.
  2. Install the Back Lock Panel: Connect the motor wire correctly, then attach the back lock panel.
  3. Semak Pemasangan: Before securing with screws, check the installation. The front handle should be pressed down and idle, and lift up to lock.

Arahan Operasi

Adding an Administrator (Local Use Mode)

To set up the lock for the first time, you need to add an administrator. This can be done locally without the app initially.

  1. Remove the battery cover on the back panel.
  2. Short press the "Set" button or long press "*" on the keypad.
  3. The voice prompt will say: "Please add administrator".
  4. Add administrator's fingerprint (6 times), IC card, or password (6-8 numbers), ended with "#" (the same password, 2 times).
  5. The voice prompt will say: "Add successfully".
  6. You can then continue to add more users. Use "*" for Back/Sign out, and "#" for Confirm.

APP Configuration (Tuya Smart App)

The Tuya Smart App allows for advanced control and monitoring of your lock.

Tuya app interface showing unlock screenTuya app interface showing member managementTuya app interface showing opening recordTuya app interface showing temporary code options

Images: Screenshots of the Tuya Smart App interface, demonstrating remote unlock, member management, opening records, and temporary password generation.

APP Remotely Control

With the Tuya Smart App, you can:

Ciri-ciri Tambahan

Penyelenggaraan

To ensure the longevity and optimal performance of your PINEWORLD E202 Smart Lock, follow these maintenance guidelines:

Menyelesaikan masalah

If you encounter issues with your PINEWORLD E202 Smart Lock, refer to the following common troubleshooting steps:

MasalahKemungkinan Punca / Penyelesaian
Lock is unresponsive / No power.
  • Batteries are dead or incorrectly installed. Replace batteries.
  • Use the Micro-USB emergency charging port with a power bank.
Cap jari tidak dikenali.
  • Fingerprint sensor is dirty. Clean the sensor.
  • Finger is wet or dirty. Ensure finger is clean and dry.
  • Fingerprint not properly enrolled. Re-enroll fingerprint.
Pad kekunci tidak bertindak balas.
  • Incorrect password entered. Verify the password.
  • Keypad is dirty. Clean the keypad surface.
  • Temporary system glitch. Try again after a few seconds.
Tidak dapat bersambung ke Aplikasi Tuya.
  • Ensure your WiFi is 2.4GHz.
  • Ensure your phone and lock are connected to the same WiFi network.
  • Reset the device and try pairing again.
  • Semak kebenaran aplikasi pada telefon anda.
Kunci membuat bunyi yang luar biasa.
  • Improper installation. Recheck all installation steps, especially the deadbolt and handle alignment.
  • Obstruction in the door frame. Clear any debris.

If the problem persists after trying these steps, please contact PINEWORLD customer support for further assistance.

Spesifikasi

CiriPerincian
JenamaPINEWORLD
Nombor ModelE202Tuya
Ciri KhasFingerprint, Smart Lock, WiFi
Jenis KunciBiometrik, Pad kekunci
bahanlogam
Penggunaan yang DisyorkanResidential Doors, Commercial Doors, Gates, Safes, Valuables
Gayamoden
Bilangan Kepingan1 (unit utama)
Jenis PengawalHand Control, Mechanical knob, Android (App)
bentuksegi empat tepat
Kaedah KawalanJauh
Protokol KetersambunganBluetooth
Berat Barang5.39 paun
Dimensi Pakej14.4 x 9.5 x 5.3 inci
Bateri Termasuk?Tidak
Tarikh Mula-mula Tersedia1 Disember 2021
Diagram showing dimensions of PINEWORLD E202 Smart Lock components

Image: Detailed dimensions of the smart lock components, including the front panel, back panel, and lock body.

Waranti dan Sokongan

PINEWORLD stands behind the quality of its products. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official PINEWORLD webtapak.

For technical support, troubleshooting assistance, or any inquiries regarding your E202 Smart Lock, please contact PINEWORLD customer service:

Please have your model number (E202Tuya) and purchase date ready when contacting support.

Dokumen Berkaitan - E202Tuya

Praview Manual Pengguna Apl Kunci Pintar PINEWORLD E202PRO
Manual pengguna untuk PINEWORLD E202PRO Smart Lock, memperincikan muat turun apl, persediaan peranti, kata laluan dan pengurusan cap jari, buka kunci jauh dan konfigurasi WiFi.
Praview Manual Pengguna Selamat Biometrik PINEWORLD K3 Pro - Lindungi Barang Berharga Anda
Manual pengguna yang komprehensif untuk PINEWORLD K3 Pro Biometric Safe. Ketahui cara memasang bateri, menetapkan kod laluan, menggunakan pengecaman cap jari, mengikat pada APP Smarthome FC dan selamatkan item anda.
Praview Manual Pengguna Selamat Biometrik PINEWORLD S3: Panduan Persediaan, Pemasangan & Operasi
Manual pengguna yang komprehensif untuk PINEWORLD S3 Biometric Safe. Ketahui cara untuk menyediakan, menambah pengguna, memasang, membersihkan dan menyelenggara peti keselamatan anda untuk keselamatan yang optimum.
Praview Manual Pengguna Selamat Biometrik Biometrik PINEWORLD K6 - Persediaan, Ciri dan Soalan Lazim
Manual pengguna yang komprehensif untuk PINEWORLD K6 Biometrik Smart Safe. Ketahui tentang ciri, komponen, spesifikasi, pemasangan, operasi, penyelesaian masalah dan pematuhan FCC.