Manual Pengguna Pengawal Paparan LED Basikal E Ymiko 810

1. Pengenalan

This user manual provides comprehensive instructions for the Ymiko 810 LED Display Controller. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance of your electric bicycle or scooter system. This display unit is designed to provide essential information and control functions for compatible brushless motor speed controllers.

2. Produk Lebihview

The Ymiko 810 LED Display Controller is a compact and durable unit designed for electric bicycles and scooters. It features an intuitive interface with LED indicators for battery level, power assist mode, and a 6km/h assist function. The controller connects to your e-bike system via a 5-wire cable, providing essential feedback and control.

Image 2.1: The Ymiko 810 LED Display Controller, showing the main unit and its coiled connection cable.

3. Ciri-ciri Utama

• Paparan led: Clear indication of battery status and power assist levels.
• Pembinaan Tahan Lama: Lightweight, waterproof, and designed for longevity.
• Penunjuk Bateri: Visual representation of remaining battery charge.
• Power Assist Control: Allows selection of different power assist gears (Low, Medium, High).
• 6km/h Assist Function: Dedicated button for low-speed assistance.
• Tidur Automatik: Enters sleep mode after 10 minutes of inactivity to conserve power.
• Petunjuk Kerosakan: Provides visual cues for system errors.
• Fungsi Memori Gear: Retains the last selected gear setting even after power failure.
• 5-Wire Digital Communication: Standardized connection for reliable data exchange with compatible controllers.

Imej 3.1: Terperinci view of the Ymiko 810 display, highlighting the ON/OFF, 6km, and MODE buttons, along with power and assist level indicators.

4. Kandungan Pakej

Pakej biasanya termasuk:

• Ymiko 810 LED Display Controller with integrated 5-wire cable.

Note: Additional components for your e-bike system (e.g., motor, controller, battery) are sold separately.

5. Panduan Pemasangan

Before proceeding with installation, ensure your electric bicycle or scooter's power is turned off and the battery is disconnected. Professional installation is recommended if you are unfamiliar with e-bike wiring.

5.1 Memasang Paparan

1. Identify a suitable location on your handlebar for the display unit. Ensure it is easily accessible and does not obstruct other controls.
2. Loosen the screw on the display's mounting bracket.
3. Position the display on the handlebar and tighten the screw securely. Do not overtighten.

Imej 5.1: Pakar sampinganfile of the Ymiko 810 display, illustrating the integrated handlebar mounting bracket.

5.2 Connecting the 5-Wire Cable

1. Locate the corresponding 5-wire connector on your e-bike's motor controller.
2. Carefully align the pins of the display's 5-wire connector with the controller's connector.
3. Push the connectors firmly together until they click into place, ensuring a secure connection.
4. Route the cable neatly along the frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Imej 5.2: Gambar jarak dekat view of the 5-wire connector, showing the distinct colored wires for proper connection.

Penting: Ensure the connector type matches your controller. The Ymiko 810 uses a 5-wire connector. Some older systems may use a 4-wire connector, which is not compatible.

Image 5.3: This image illustrates the difference between the 5-wire (New Type) and 4-wire (Old Type) connectors. Verify your controller's connector type before installation.

6. Wiring Diagram (5-Wire Connector)

The 5-wire cable typically follows this color code for connection to a compatible e-bike controller:

• Kawat Merah: Kuasa Positif (+)
• Kawat Biru: Controller Power Control Line
• Kawat Hitam: Kuasa Negatif (-)
• Kawat Hijau: Data Receiving (RX)
• Kawat kuning: Data Transmitting (TX)

Always cross-reference with your motor controller's manual for specific wiring instructions. Incorrect wiring can damage the display or controller.

7. Operasi

Once installed and connected, the Ymiko 810 LED Display Controller provides intuitive control over your e-bike's basic functions.

7.1 Hidupkan/Mati Kuasa

• Tekan ke HIDUP/MATI button to power on the display and the e-bike system.
• Tekan dan tahan butang HIDUP/MATI button for a few seconds to power off the system.

7.2 Power Assist Mode Selection

• Tekan ke MODE button to cycle through the power assist levels: Low, Medium, and High.
• The corresponding LED indicator (LOW, MED, HIGH) will illuminate to show the currently selected assist level.

7.3 6km/h Assist Function

• Tekan dan tahan butang 6km button to activate the 6km/h assist function. This provides a steady low speed for walking alongside the bike or navigating crowded areas.
• Lepaskan butang untuk menyahaktifkan fungsi.

7.4 Penunjuk Aras Bateri

The KUASA LED indicators provide an approximate visual representation of the remaining battery charge. The number of illuminated LEDs decreases as the battery drains.

8. Penyelenggaraan

• Pembersihan: Lap unit paparan dengan kain lembut,amp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Pemeriksaan: Periodically check the cable and connector for any signs of wear or damage. Ensure the mounting bracket is secure.
• Pendedahan Air: While the unit is waterproof, avoid prolonged submersion or high-pressure washing.

9. Penyelesaian masalah

10. Spesifikasi

11. Waranti dan Sokongan

Untuk maklumat waranti atau sokongan teknikal, sila rujuk dokumentasi yang diberikan bersama pembelian anda atau hubungi penjual secara terus. Simpan resit pembelian anda sebagai bukti pembelian.