Manual Pengguna Kamera Pemuka IROAD NX7

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• IROAD NX7 Main Unit (Front Camera)
• Kamera Belakang
• Kabel Sambungan Kamera Belakang
• OBD-II Power Cable (for general and hybrid vehicles)
• Kad MicroSD 16GB
• Manual Pengguna (dokumen ini)
• Pelekap Pelekat
• Kabel Pengecasan
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Produk Selesaiview

Familiarize yourself with the components and their functions.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Unit Utama (Kamera Hadapan)

• Lensa Kamera Depan: Records the view through the front windshield.
• LED Keselamatan: Indicates recording status and acts as a security deterrent.
• LED operasi: Shows the device's operational status.
• 3-inch Touch Panel Display: Untuk viewdalam hidup footage, playback, and accessing settings.
• Slot Kad MicroSD: Insert the provided MicroSD card for video storage.
• Suis kuasa: Untuk menghidupkan atau mematikan peranti.
• DC-IN Power Terminal: Menyambung ke kabel kuasa.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Menyambungkan kabel kamera belakang.

Kamera Belakang

• Lensa Kamera Belakang: Records the view through the rear windshield.
• LED operasi: Indicates the rear camera's operational status.

Persediaan

1. Memasukkan Kad MicroSD

1. Pastikan cam dash dimatikan.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Remove the protective film from the adhesive mount.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Pemasangan Kamera Belakang

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Locate your vehicle's OBD-II port (usually under the dashboard on the driver's side).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Pasang antena GPS di lokasi yang jelas view of the sky, typically on the dashboard or near the windshield.

Arahan Operasi

Menghidupkan/Mematikan

• Hidupkan kuasa: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Matikan: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Mod Rakaman

The IROAD NX7 supports various recording modes:

• Rakaman Berterusan: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage sebagai satu acara file, menghalangnya daripada ditulis ganti.
• Parking Surveillance (24-hour Recording):
  • Pengesanan Pergerakan: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Records when an impact is detected while parked.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Operasi Panel Sentuh

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewrakaman

• Pada Peranti: Access the playback menu on the touch screen to view recorded videos directly.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webtapak) kepada view and manage recordings.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Penyelenggaraan

Pengurusan Kad MicroSD

• Pemformatan Biasa: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer perisian.
• Jangka Hayat Kad: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Membersihkan Peranti

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Jangan gunakan pembersih atau pelarut yang melelas, kerana ia boleh merosakkan peranti.
• Ensure the lenses are clean and free of smudges for clear video quality.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.