XINJIA Electronic Voice Watch User Manual

pengenalan

This manual provides comprehensive instructions for the XINJIA XJ-768 Electronic Voice Watch, designed for individuals with visual impairments, middle-aged, and elderly users. It features English voice prompts, an alarm clock, and a large digital display for ease of use. Please read this manual thoroughly to understand the watch's functions and ensure proper operation.

Rajah 1: Depan view of the XINJIA XJ-768 Electronic Voice Watch.

Ciri-ciri Produk

• Paparan Masa: Clearly displays the current time and allows for easy time setting.
• Fungsi Penggera: Provides customizable alarm settings with the option to change the alarm tone.
• Timekeeping Function: Features a 'TALKING' button to broadcast the current time and an automatic hourly timekeeping function that can be toggled on or off.
• Fungsi Tunda: Allows for a temporary pause of the alarm, with the alarm sounding again after 5 minutes.
• Kebolehgunaan yang dipertingkatkan: Designed with a larger font display, increased volume, and simplified operation for improved accessibility.

Persediaan

Initial Battery Installation

The XINJIA XJ-768 watch comes with one LR44 battery included. Before initial use, ensure the battery is properly seated. If the display is blurred or the watch is unresponsive, the battery may need to be replaced. Refer to the 'Battery Replacement' section for detailed instructions.

Arahan Operasi

The watch features four primary buttons for operation: B1 (MODE), B2 (MINUTE), B3 (HOUR), dan B4 (TALKING). These buttons are located on the sides of the watch case.

Rajah 2: Sisi view illustrating the watch buttons.

1. Menetapkan Masa

1. Daripada mod paparan masa biasa, tekan butang B1 (MODE) button once. The time digits will begin flashing.
2. Tekan ke B2 (MINUTE) butang untuk menyesuaikan minit.
3. Tekan ke B3 (HOUR) butang untuk melaraskan jam.
4. Setelah masa yang betul ditetapkan, tekan B1 (MODE) sekali lagi untuk keluar dari mod tetapan masa.

2. Menetapkan Masa Penggera

1. Daripada mod paparan masa biasa, tekan butang B1 (MODE) button twice. The display will show the 'AL' symbol, and the alarm time digits will flash.
2. Tekan ke B2 (MINUTE) butang untuk menetapkan minit penggera yang diingini.
3. Tekan ke B3 (HOUR) button to set the desired alarm hours.
4. Setelah masa penggera ditetapkan, tekan B1 (MODE) sekali lagi untuk keluar dari mod tetapan penggera.

3. Selecting Alarm Tone and Turning Alarm On/Off

1. Daripada mod paparan masa biasa, tekan butang B3 (HOUR) butang.
2. Each press will cycle through alarm tone options and toggle the alarm function on or off.
3. When the alarm is set to ON, the alarm will sound at the set time, and the LCD will display the alarm time. After the alarm plays, the normal time will be displayed.
4. When the alarm is set to OFF, the alarm symbol will disappear, and the watch will broadcast a 'DI' sound to confirm.

4. Turning Hourly Timekeeping On/Off

1. Daripada mod paparan masa biasa, tekan butang B2 (MINUTE) butang.
2. Each press will toggle the hourly timekeeping function on or off.
3. When activated, a specific symbol will appear on the dial, and the watch will automatically announce the hour.
4. When turned off, the symbol will disappear.

5. Using the Snooze Function

1. Semasa penggera berbunyi, tekan B4 (TALKING) butang.
2. This will stop the current alarm and activate the snooze function.
3. The alarm will sound again automatically after 5 minutes.

6. Broadcasting the Current Time

• Daripada mod paparan masa biasa, tekan butang B4 (TALKING) butang sekali.
• The watch will audibly announce the current time.

Penyelenggaraan

Penggantian Bateri

The watch uses one LR44 battery. You will know it's time to replace the battery if you observe any of the following:

• The display font becomes blurred or disappears.
• The sound volume becomes significantly lower.
• The watch functions abnormally or inconsistently.

To replace the battery, carefully open the back casing of the watch. Replace the old LR44 battery with a new one, ensuring correct polarity. Close the back casing dengan selamat.

Rajah 3: Belakang view of the watch, showing the battery compartment access.

Menyelesaikan masalah

If you experience issues with your XINJIA XJ-768 watch, consider the following common solutions:

• Tiada Paparan atau Paparan Samar: Check the battery. It may be depleted or improperly installed. Replace with a new LR44 battery if necessary.
• Tiada Bunyi atau Bunyi Rendah: This is often an indication of a low battery. Replace the battery.
• Incorrect Time/Alarm: Ensure you have followed the time and alarm setting instructions precisely. Repeat the setting process if needed.
• Butang Tidak Responsif: A low battery can affect button responsiveness. Try replacing the battery. If the issue persists, ensure no debris is obstructing the buttons.

Untuk isu berterusan yang tidak dapat diselesaikan melalui langkah-langkah ini, sila rujuk bahagian Waranti dan Sokongan.

Spesifikasi

Waranti dan Sokongan

For information regarding warranty coverage or technical support for your XINJIA XJ-768 Electronic Voice Watch, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Wuhan Prisco