Innovations 288-1W-BAB-M4-AB Wall Sconce User Manual

1. Pengenalan

This manual provides instructions for the safe installation, operation, and maintenance of your Innovations 288-1W-BAB-M4-AB One Light Wall Sconce from the Nouveau 2 Collection. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Figure 1: Innovations 288-1W-BAB-M4-AB Wall Sconce, featuring a black antique brass finish and a clear glass shade with an exposed filament bulb.

2. Maklumat Keselamatan

AMARAN: RISIKO RENJATAN ELEKTRIK. Matikan kuasa pada pemutus litar atau kotak fius sebelum pemasangan atau servis.

• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
• Rujuk juruelektrik bertauliah jika anda tidak pasti tentang proses pemasangan.
• This fixture is rated for Damp locations. Do not install in areas where it will be directly exposed to water.
• Pastikan semua sambungan pendawaian selamat dan terlindung dengan betul.
• Jangan melebihi wat maksimumtage dinyatakan untuk mentol lampu.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• Wall Sconce Fixture (1 unit)
• Mounting Hardware (crossbar, screws, wire nuts)
• Manual Arahan

Note: Light bulb is typically sold separately unless specified.

4. Persediaan dan Pemasangan

Alat yang Diperlukan (tidak termasuk): Screwdriver, wire strippers, electrical tape, safety glasses.

1. Matikan Kuasa: Cari pemutus litar atau kotak fius dan matikan kuasa ke kotak simpang tempat lekapan akan dipasang.
2. Sediakan Wayar: Carefully remove the existing fixture (if any). Strip 3/4 inch of insulation from the ends of the house supply wires.
3. Pasang Plat Pemasangan: Secure the mounting plate (crossbar) to the junction box using the provided screws. Ensure it is firmly attached.
4. Buat Sambungan Elektrik:
   • Connect the bare copper ground wire from the fixture to the house ground wire (usually bare copper or green) using a wire nut.
   • Connect the ribbed or marked fixture wire (neutral) to the house white wire (neutral) using a wire nut.
   • Connect the smooth or unmarked fixture wire (hot) to the house black wire (hot) using a wire nut.
   • Berhati-hati masukkan semua wayar ke dalam kotak simpang.
5. Lekapan Lekapan: Align the fixture with the mounting plate and secure it using the provided screws or decorative nuts.
6. Pasang Mentol Lampu: Screw in an ST64 type light bulb (max 1 Watt, or as specified on the fixture) into the socket.
7. Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar atau kotak fius.

5. Arahan Operasi

Once installed and power is restored, the Innovations 288-1W-BAB-M4-AB Wall Sconce operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

6. Penyelenggaraan

Pembersihan:

• Ensure power is turned off before cleaning.
• Lap lekapan dengan kain lembut dan kering.
• Jangan gunakan pembersih, pelarut atau pengilat yang melelas kerana ia boleh merosakkan kemasan.

Penggantian mentol:

• Matikan kuasa pada lekapan pada pemutus litar.
• Allow the bulb to cool completely before touching.
• Unscrew the old bulb and replace it with a new ST64 type bulb, not exceeding 1 Watt.
• Pulihkan kuasa.

7. Penyelesaian masalah

8. Spesifikasi

9. Waranti dan Sokongan

This Innovations fixture comes with a Waranti penamat 2 tahun dan a lifetime electrical warranty. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan dan perkhidmatan biasa.

For technical support, replacement parts, or warranty claims, please contact Innovations customer service. Refer to your purchase documentation for specific contact details or visit the official Innovations webtapak.

Please have your model number (288-1W-BAB-M4-AB) and date of purchase available when contacting support.