pengenalan
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Scheppach KAP254PRO miter saw. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage. Keep this manual in a safe place for future reference.
Image: The Scheppach KAP254PRO miter saw, showcasing its robust design and integrated laser guide.
Arahan Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan asas untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.
- Pakai peralatan perlindungan diri (PPE) yang sesuai: Always wear safety glasses, hearing protection, and a dust mask. Avoid loose clothing or jewelry that could get caught in moving parts.
- Memastikan persekitaran kerja yang selamat: Keep the work area clean, well-lit, and free from obstructions. Do not operate the saw in damp atau keadaan basah.
- Selamatkan bahan kerja: Sentiasa clamp the workpiece firmly to the fence and table before making a cut. Never hold the workpiece by hand.
- Maintain proper posture: Keep a balanced stance and avoid overreaching. Do not force the saw; let the blade do the work.
- Inspect the blade: Before each use, check the saw blade for cracks, missing teeth, or damage. Replace damaged blades immediately.
- Use the blade guard: Ensure the blade guard is functioning correctly and always in place.
- Unplug before adjustments or maintenance: Always disconnect the saw from the power source before changing blades, making adjustments, or performing any maintenance.
- Pastikan tangan bersih: Never place hands near the cutting path or blade.
- Elakkan permulaan secara tidak sengaja: Ensure the switch is in the OFF position before plugging in the tool.
- Do not modify the tool: Unauthorized modifications can compromise safety and void the warranty.
Produk Selesaiview
The Scheppach KAP254PRO is a powerful miter saw designed for precise cutting of wood and plastic. Key features include:
- Powerful 2000 W Motor: Menyediakan ampkuasa untuk pelbagai tugas pemotongan.
- Integrated Laser: For precise alignment and accurate cut line indication.
- Lampu Kerja LED: Menerangi kawasan pemotongan untuk penglihatan yang lebih baik.
- Fully Enclosed Blade Guard: Meningkatkan keselamatan semasa operasi.
- HW Saw Blade: High-quality blade for consistent and precise cutting results.
- Reka bentuk padat: Suitable for smaller workshops.
- Aluminum Workpiece Supports: Provides stable support for materials.
- Rotary Table with Quick Lock: Allows for quick and accurate angle adjustments.
Imej: Terperinci view of the Scheppach KAP254PRO miter saw, highlighting its main components.
Persediaan
Follow these steps for initial setup of your miter saw:
- Membongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Periksa untuk sebarang kerosakan penghantaran.
- Pemasangan: Securely mount the miter saw to a stable workbench using appropriate bolts and washers. Ensure the workbench can support the weight and forces generated during operation.
- Pemasangan Bilah (jika belum dipasang terlebih dahulu):
- Putuskan kuasa: Pastikan gergaji telah dicabut daripada plagnya.
- Open blade guard: Angkat pelindung bilah bawah.
- Loosen arbor nut: Gunakan sepana yang disediakan untuk melonggarkan nat arbor sambil memegang butang kunci arbor.
- Install blade: Place the new blade onto the arbor, ensuring the teeth are pointing in the correct direction (usually indicated by an arrow on the blade and saw).
- Tighten arbor nut: Ketatkan kacang arbor dengan selamat.
- Close blade guard: Ensure the blade guard returns to its proper position.
- Adjusting Fences and Stops: Verify that the fences are square to the blade and adjust if necessary. Familiarize yourself with the miter and bevel angle adjustment mechanisms.
- Laser and LED Alignment: Test the laser guide and LED worklight. Adjust the laser if it does not accurately indicate the cut line.
Arahan Operasi
Sebelum beroperasi, pastikan semua langkah berjaga-jaga keselamatan difahami dan dipatuhi.
- Sediakan Bahan Kerja: Mark your cut line clearly on the material.
- Laraskan Sudut:
- Sudut Miter: Loosen the miter lock handle, rotate the turntable to the desired angle, and tighten the handle.
- Sudut Serong: Loosen the bevel lock, tilt the saw head to the desired angle, and tighten the lock.
- Letakkan Bahan Kerja: Place the workpiece firmly against the fence and on the saw table. Use clamps to secure it. Ensure the cut line aligns with the laser guide.
- Mulakan Gergaji: Hold the handle firmly. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Buat Potongan:
- For crosscuts: Slowly lower the saw head through the workpiece.
- For sliding cuts (if applicable): Pull the saw head forward, lower it into the workpiece, and push it smoothly backward through the material.
- Lengkapkan Potongan: Setelah pemotongan selesai, lepaskan suis kuasa dan biarkan bilah berhenti sepenuhnya sebelum menaikkan kepala gergaji.
- Keluarkan Bahan Kerja: Only remove the cut material after the blade has come to a complete stop and the saw head is fully raised.
Penyelenggaraan
Regular maintenance ensures the longevity and safe operation of your miter saw. Always unplug the tool before performing any maintenance.
- Pembersihan: After each use, clean sawdust and debris from the saw, especially around the motor vents, blade guard, and table. Use a brush or compressed air. Do not use solvents.
- Penggantian Bilah: Replace dull or damaged blades promptly. Refer to the "Setup" section for blade installation instructions. Use only blades with the correct diameter (254mm) and arbor size.
- Pelinciran: Periodically apply a light coat of machine oil to moving parts, such as the sliding mechanism (if applicable) and pivot points, to ensure smooth operation.
- Berus Karbon: Check the carbon brushes periodically. If they are worn down, replace them with genuine Scheppach replacement parts.
- Pemeriksaan Kord Kuasa: Periksa kord kuasa secara berkala untuk kerosakan. Jika rosak, dapatkan pembaikan oleh juruteknik yang berkelayakan.
Menyelesaikan masalah
Bahagian ini menangani isu biasa yang mungkin anda hadapi. Untuk masalah yang tidak disenaraikan di sini, hubungi sokongan pelanggan.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Saw tidak bermula | Tiada bekalan kuasa; suis rosak; beban motor berlebihan. | Check power connection and circuit breaker. Ensure switch is fully engaged. Allow motor to cool if overloaded. |
| Bilah tidak memotong dengan bersih | Dull or damaged blade; incorrect blade for material; improper feed rate. | Replace blade. Use appropriate blade for the material. Adjust feed rate. |
| Getaran atau bunyi yang berlebihan | Loose blade; damaged blade; worn motor bearings; loose mounting. | Tighten blade. Replace damaged blade. Check saw mounting. Contact service if bearings are suspected. |
| Laser guide is inaccurate | Laser needs adjustment; laser lens is dirty. | Clean laser lens. Refer to manual for laser adjustment procedure. |
Spesifikasi
Technical data for the Scheppach KAP254PRO miter saw:
- Nombor Model: KAP254PRO (5901216904)
- Kuasa: 2000 Watt
- Voltage: 230 Volt
- Diameter Bilah: 254 mm
- Bilangan Gigi: 48 (as per specifications, though title mentions 60) - Note: User should verify blade teeth count on actual product or packaging.
- Max. Cutting Width (90°): 340 mm x 90 mm
- Berat: 17.62 kg
- Ciri Khas: Integrated Laser, LED Worklight
- Permukaan Disyorkan: Kayu, Plastik
- Sumber Kuasa: Elektrik Bertali
- Bahan: Metal (handle/lever), Aluminium (workpiece supports)
Waranti dan Sokongan
For warranty information, spare parts availability, or technical support, please contact Scheppach customer service directly. Refer to the product packaging or the official Scheppach webtapak untuk butiran hubungan khusus untuk wilayah anda.
