1. Pengenalan
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Apa yang ada di dalam Kotak
Sila semak kandungan pakej untuk memastikan semua item ada:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-Key IR Remote Control
- 1 x 24V Power Adapter (US Plug)
3. Maklumat Keselamatan
Read all safety instructions before installation and use. Keep this manual for future reference.
- Penggunaan Dalaman Sahaja: This product is designed for indoor use and is not waterproof.
- Bekalan Kuasa: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Permukaan Pemasangan: Pastikan permukaan pemasangan bersih, kering dan licin untuk prestasi pelekat yang optimum.
- Memotong Jalur: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Elakkan Terlalu Panas: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Kanak-kanak dan Haiwan Kesayangan: Jauhkan produk dan komponennya daripada capaian kanak-kanak dan haiwan peliharaan.
4. Persediaan & Pemasangan
Ikuti langkah ini untuk pemasangan yang betul:
- Sediakan Permukaan: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Measure and Cut (if necessary): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Pasangkan Jalur: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Sambungkan Kuasa: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Aktifkan Alat Jauh: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Arahan Operasi
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Fungsi Kawalan Jauh:
- Hidup/Mati: Power button to turn the lights on or off.
- Pelarasan Kecerahan: Gunakan ↑ dan ↓ buttons to increase or decrease brightness.
- Pilihan Warna: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Warna DIY: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Tekan a DIY butang.
- Gunakan ↑ dan ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Tekan sama DIY button again to save your custom color.
- Pemilihan Mod: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- KILAT: Jumps between colors.
- FADE3/FADE7: Pudar antara 3 atau 7 warna.
- LOMPAT3/LOMPAT7: Jumps between 3 or 7 colors.
- AUTO: Cycles through all modes.
- CEPAT/PERLAHAN: Adjusts the speed of dynamic modes.
Figure 6: Remote control in use for ambient lighting.
6. Penyelenggaraan
Proper maintenance ensures the longevity of your LED strip lights.
- Pembersihan: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Storan: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Elakkan Bengkok: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Penyelesaian masalah
Jika anda menghadapi masalah, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala. |
|
|
| Alat kawalan jauh tidak bertindak balas. |
|
|
| Warna tidak betul atau tidak konsisten. |
|
|
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Kusta |
| Nombor Model | PR410116-RGB-US |
| Jenis Sumber Cahaya | LED (5050 SMD) |
| Warna Cerah | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Panjang | 39.4 kaki (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watt (Serasi Maks) |
| Kaedah Kawalan | 44-Key IR Remote Control |
| Ciri Khas | Color Changing, Dimmable, 8 Dynamic Modes |
| Penggunaan Dalaman/Luar | Dalaman Sahaja |
| bahan | Tembaga, Plastik |
| Berat Barang | 9.6 auns |
| Indeks Paparan Warna (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Waranti & Sokongan
Produk Lepro direka bentuk untuk kebolehpercayaan dan prestasi. Untuk butiran jaminan khusus dan sokongan pelanggan, sila rujuk kad jaminan yang disertakan dengan produk anda atau lawati laman web rasmi Lepro. webtapak.
Maklumat Hubungan:
- Webtapak: www.lepro.com (Sila semak pegawai weblaman web untuk maklumat hubungan terkini.)
- e-mel: Rujuk kepada pembungkusan produk atau webtapak.
