VOLTCRAFT SDM-2125 Coating Thickness Gauge User Manual

1. Pengenalan

This user manual provides detailed instructions for the operation and maintenance of the VOLTCRAFT SDM-2125 Coating Thickness Gauge. This device is designed for high-precision and non-destructive measurements of coating thickness on both ferrous and non-ferrous metal substrates. It automatically detects the substrate material and determines the coating thickness using magnetic flux or eddy current principles.

The SDM-2125 weighs approximately 180 g and can store up to 500 data groups. It features a clear display that indicates whether measured values are within set limits (green for within limits, red for below limit, yellow for exceeding limit). For energy efficiency, the device automatically switches off after five minutes of inactivity. It supports both single-point and multi-point measurements, and its advanced algorithm for calculating measurement averages ensures quick and accurate results.

Rajah 1: Depan view of the VOLTCRAFT SDM-2125 Coating Thickness Gauge, showing the display and control buttons.

2. Ciri-ciri Utama

• Dual-Purpose Measurement: Suitable for both ferrous and non-ferrous metals.
• Prinsip Pengukuran: Utilizes both magnetic flux and eddy current measurement methods.
• Automatic Substrate Detection: Automatically identifies the underlying material (ferrous or non-ferrous).
• Penyimpanan Data: Capable of storing up to 500 data groups for comprehensive analysis.
• Flexible Measurement Modes: Offers two measurement options: single-point measurement or continuous multi-point measurement.
• Limit Value Indication: Visual feedback (green, red, yellow) to indicate if measurements are within, below, or above set limits.
• Matikan automatik: Conserves battery life by automatically powering down after five minutes of inactivity.

Figure 2: The SDM-2125 displaying a measurement reading, highlighting its clear digital interface.

3. Persediaan

3.1 Membongkar dan Pemeriksaan

1. Carefully remove the SDM-2125 device and all accessories from the packaging.
2. Inspect the device for any signs of damage during transit. If damage is found, do not proceed with setup and contact customer support.
3. Verify that all components listed in the packing list are present. This typically includes the main unit, calibration foils, and a zero-calibration plate.

3.2 Pemasangan Bateri

The SDM-2125 requires batteries for operation. (Note: Batteries are not included with the device.)

1. Cari petak bateri di bahagian belakang peranti.
2. Buka penutup petak bateri.
3. Insert the required batteries, ensuring correct polarity as indicated inside the compartment.
4. Tutup penutup petak bateri dengan selamat.

Rajah 3: Belakang view of the SDM-2125, illustrating the battery compartment location.

3.3 Kuasa Awal Hidup dan Penentukuran

1. Tekan butang kuasa untuk menghidupkan peranti.
2. Perform a zero-point calibration on a bare, uncoated metal substrate (ferrous and non-ferrous, if applicable) provided with the device. Follow the on-screen instructions or refer to the quick start guide for specific calibration steps.
3. Calibrate with the included calibration foils of known thickness to ensure accuracy across the measurement range.

4. Operasi

4.1 Pengukuran Asas

1. Ensure the device is powered on and calibrated.
2. Place the probe of the gauge firmly and perpendicularly onto the coated surface to be measured.
3. The device will automatically detect the substrate material (Fe for ferrous, NFe for non-ferrous) and display the coating thickness reading.
4. Observe the color indicator on the display for limit value status (green, red, or yellow).

4.2 Mod Pengukuran

The SDM-2125 supports different measurement modes:

• Mod Pengukuran Tunggal: For individual readings at specific points. Press the probe, read the value, then lift the probe.
• Mod Pengukuran Berterusan: For scanning a surface and obtaining multiple readings rapidly. Keep the probe in contact and slide it across the surface. The device will continuously update the reading.

4.3 Penyimpanan dan Pengingatan Data

The device can store up to 500 data groups.

• To save a measurement, refer to the device's specific button functions (e.g., a 'Save' or 'Memory' button).
• To recall stored data, navigate through the memory function using the designated buttons. The device typically displays statistics like average, minimum, and maximum values for stored groups.

Figure 4: The SDM-2125 showing a measurement value, demonstrating its capability to display various data points including number of readings, average, min, and max.

5. Penyelenggaraan

5.1 Pembersihan

• Regularly clean the device's exterior with a soft, dry cloth.
• Untuk kotoran degil, sedikit damp Kain dengan detergen lembut boleh digunakan, tetapi pastikan tiada cecair memasuki peranti.
• Pay special attention to keeping the measurement probe clean and free of debris, as this can affect accuracy.
• Jangan gunakan pembersih yang melelas, pelarut atau bahan kimia yang kuat.

5.2 Penyimpanan

• When not in use for extended periods, remove the batteries to prevent leakage and damage to the device.
• Store the device in its original case or a protective pouch to prevent scratches and impacts.
• Store in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.

5.3 Semakan Penentukuran

• Periodically check the calibration of the device using the provided calibration foils and zero-calibration plate.
• Recalibrate if readings are inconsistent or if the device has been subjected to significant temperature changes or impacts.

6. Penyelesaian masalah

7. Spesifikasi

8. Waranti dan Sokongan

For warranty information, technical support, or service inquiries regarding your VOLTCRAFT SDM-2125 Coating Thickness Gauge, please refer to the warranty card included with your product or visit the official VOLTCRAFT webtapak.

You can also contact the seller, Conrad Electronic SE, for assistance with your purchase.

Sumber Dalam Talian:

• VOLTCRAFT Official Webtapak: www.voltcraft.com (General link, specific link not provided in input)
• Conrad Electronic SE Seller Page: Maklumat Penjual