1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Imej 1.1: Depan view of the SEBSON Outdoor Motion Detector.
2. Arahan Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan berikut untuk mengelakkan kecederaan atau kerosakan pada peranti:
- Keselamatan Elektrik: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Pastikan vol operasitage of 230V AC matches your electrical supply.
- Penilaian IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Pemasangan: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Kanak-kanak: Jauhkan bahan pembungkusan dan bahagian kecil daripada kanak-kanak.
3. Kandungan Pakej
Pakej termasuk:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Produk Lebihview dan Ciri
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Julat Pengesanan: Up to 12 meters with a 180° infrared sensor.
- Kepala Sensor Boleh Laras: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Serasi LED: Menyokong LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Reka bentuk tahan lasak: IP44 rated for outdoor use, anthracite color, made of plastic.
Imej 4.1: Selesaiview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Persediaan dan Pemasangan
Ikuti langkah ini untuk pemasangan yang betul:
- Sediakan untuk Pemasangan: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Pilih Lokasi Pemasangan: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Memasang Pangkalan:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Tebuk lubang pada titik yang ditanda. Masukkan palam dinding yang sesuai jika perlu.
- Secure the detector's base firmly to the wall using screws.
- Sambungan Pendawaian: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Imej 5.1: Cthample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Tutup Perumahan: Carefully close the detector housing, ensuring no wires are pinched.
- Pulihkan Kuasa: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Arahan Operasi dan Pelarasan
The motion detector features two adjustable dials for customizing its operation:
Imej 6.1: Jarak dekat view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the ikon matahari for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the ikon bulan for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Penyelenggaraan
To ensure optimal performance and longevity of your motion detector:
- Pembersihan: Regularly clean the sensor lens and the outer casing dengan lembut, kering, atau sedikit damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Pemeriksaan: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Faktor Persekitaran: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Penyelesaian masalah
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Light does not turn on when motion is detected. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Spesifikasi
| Ciri | Spesifikasi |
|---|---|
| Pengeluar | SEBSON |
| Nombor Model | IR_OUT_BA |
| Dimensi Produk (L x W x H) | 8.6 x 6 x 9.6 cm |
| Berat badan | 155 Gram |
| warna | Antrasit |
| bahan | plastik |
| Sumber Kuasa | AC |
| Voltage | 230 Volt |
| Max. Power (LED) | 300 Watt |
| Max. Power (Incandescent) | 1200 Watt |
| Kaedah Pemasangan | Pemasangan Dinding (Dipasang di Permukaan) |
| Keserasian Jenis Mentol | LED |
| Julat Pengesanan | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 saat - 7 minit |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Penarafan IP | IP44 |
| Penggunaan yang Disyorkan | Luar |
| Suhu Tertinggi | 40 Darjah Celsius |
| Negara Asal | China |
10. Waranti dan Sokongan
Polisi Pemulangan: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Sokongan Pelanggan: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
