1. Pengenalan
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. l serba boleh iniamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. Kandungan Pakej
Before proceeding with setup, please ensure all components are present:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 x Penyesuai Kuasa AS
- 1 x Kabel USB Jenis C
- 1 x Manual Pengguna (dokumen ini)
3. Persediaan
Follow these steps to set up your LED Table Lamp:
- Bongkar: Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Sambungkan Kuasa: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. Arahan Operasi
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. Hidupkan/Mati Kuasa
- Akhbar Ringkas: Lightly tap the top touch area (power symbol) to turn the lamp hidup atau mati.
4.2. Adjusting White Light (Tunable White Mode)
Lamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- Tukar Suhu: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- Laraskan Kecerahan: While in any white light mode, Tekan Panjang the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
Lamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, Tekan Panjang the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, Tekan Panjang the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Auto-Off Timer
Lamp includes a convenient auto-off timer function for 30 or 60 minutes.
- Aktifkan Pemasa: Press the timer button (clock symbol) on the lamppangkalan.
- Pemasa 30 Minit: One press activates the 30-minute timer (indicated by one green LED on the base).
- Pemasa 60 Minit: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. Fungsi Memori
Lamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. Penyelenggaraan
Untuk memastikan jangka hayat dan prestasi optimum peranti andaamp, ikut garis panduan penyelenggaraan ini:
- Pembersihan: Putuskan sambungan lamp daripada kuasa sebelum membersihkan. Gunakan kain lembut dan kering untuk mengelapamp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Pengendalian: Mengendalikan lamp dengan berhati-hati. Elakkan daripada menjatuhkannya atau menyebabkannya terkena hentaman kuat.
- Storan: Jika menyimpan lamp Untuk tempoh yang lama, pastikan ia bersih dan kering. Simpan di tempat yang sejuk dan kering, jauh daripada cahaya matahari langsung.
6. Penyelesaian masalah
If you encounter issues with your Lepro LED Table Lamp, rujuk kepada masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. | Tiada sambungan kuasa. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | Operasi kawalan sentuh yang salah. | Ensure you are performing a Tekan Panjang on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, Tekan Panjang the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then Tekan Panjang the top touch area to adjust speed. |
| Fungsi pemasa tidak berfungsi. | Timer not activated or incorrectly set. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | PR210002-AS |
| Jenama | Kusta |
| Dimensi Produk | 3.9"D x 3.9"W x 7.1"H |
| Berat Barang | 0.85 paun (13.6 auns) |
| bahan | plastik |
| Jenis Sumber Cahaya | LED |
| Kecerahan | 350 Lumen |
| Wattage | 7 watt |
| Voltage | 120 Volt (AC) |
| Pilihan Warna Cerah | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| Kaedah Kawalan | Sentuh |
| Sumber Kuasa | Elektrik Bertali |
| Panjang Kabel | 4 Kaki |
| Penggunaan Dalaman/Luar | Penggunaan dalaman sahaja |
| Tahap Ketahanan Air | Bukan Tahan Air |
8. Waranti dan Sokongan
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.
