1. Pengenalan
This user manual provides essential information for the safe and efficient use of your Genmitsu 24V 4A DC Power Supply Adapter. This adapter is specifically designed to power upgraded 20000RPM spindles, ensuring optimal performance for compatible CNC Routers such as the 3018-PRO, 3018-PROVer, 3018-PROVer Mach3, 4040-PRO, and 4040 Reno.
Figure 1: Genmitsu 24V 4A DC Power Supply Adapter and included cables.
2. Ciri-ciri Produk
- Prestasi Dinaik Taraf: Designed with a high starting current (8-10A) to effectively power more robust 20000RPM spindle motors, preventing overload.
- Keselamatan yang Dipertingkatkan: Features CE/FCC/UL certification and incorporates multiple protection mechanisms including over-voltage, lebihan arus, lebih suhu dan perlindungan litar pintas.
- Pembinaan Tahan Lama: Built with a smart integrated circuit to maintain stable power delivery and prevent overheating.
- Keserasian Luas: Specifically engineered for 3018 CNC series, including 3018-PRO, 3018-PROVer, and 3018-PROVer Mach3, as well as 4040-PRO and 4040 Reno CNC routers.
Figure 2: Comparison illustrating the upgraded power supply's design and dimensions.
Figure 3: Illustration of the built-in smart integrated circuit for stable operation.
3. Maklumat Keselamatan
Always adhere to the following safety guidelines to prevent damage to the power supply, connected devices, and to ensure personal safety:
- Ensure the power supply is used with compatible devices that match its voltage and current requirements (24V DC, 4A).
- Jangan dedahkan bekalan kuasa kepada air, kelembapan atau suhu yang melampau.
- Avoid dropping or subjecting the power supply to severe impacts.
- Jangan cuba membuka atau mengubah suai bekalan kuasa. Rujuk semua servis kepada kakitangan yang berkelayakan.
- Disconnect the power supply from the main outlet before cleaning or when not in use for extended periods.
- Ensure proper ventilation around the power supply during operation to prevent overheating.
Figure 4: The power supply includes multiple safety protections.
4. Persediaan dan Pemasangan
Follow these steps to correctly set up your Genmitsu Power Supply Adapter:
- Sahkan Keserasian: Confirm that your CNC router or spindle motor requires a 24V DC, 4A power input. This adapter is specifically designed for upgraded 20000RPM spindles compatible with 3018-PRO/PROVer/PROVer Mach3 and 4040-PRO/Reno CNC machines.
- Connect DC Output: Plug the DC output connector (barrel plug) of the power supply into the corresponding DC input port on your CNC router or spindle motor. Ensure a secure connection.
- Sambungkan Input AC: Connect the AC power cord to the AC input port on the power supply. Then, plug the other end of the AC power cord into a standard wall outlet (100-240V AC, 50/60Hz).
- Hidupkan kuasa: Once all connections are secure, you may power on your CNC router or spindle motor according to its specific operating instructions.
Figure 5: AC input and DC output connections on the power supply.
Figure 6: Detail of the DC barrel connector for spindle connection.
Figure 7: The power supply is compatible with various Genmitsu CNC router models.
5. Operasi
The Genmitsu Power Supply Adapter operates automatically once connected to a power source and a compatible device. It provides a stable 24V DC output to ensure consistent performance of your 20000RPM spindle.
For optimal spindle performance, ensure that the spindle speed setting in your CNC control software is configured to utilize the full 20000RPM capability, as supported by this upgraded power supply.
Video 1: Demonstrates the improved spindle performance with the upgraded power supply compared to the original, showing smoother operation and reduced stuttering.
6. Penyelenggaraan
The Genmitsu Power Supply Adapter requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Keep the power supply clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Ensure that the ventilation slots are not blocked to allow for proper heat dissipation.
- Regularly inspect the power cords and connectors for any signs of damage, fraying, or loose connections. Replace if necessary.
- Simpan bekalan kuasa di tempat yang sejuk dan kering apabila tidak digunakan.
7. Penyelesaian masalah
Jika anda menghadapi masalah dengan bekalan kuasa anda, rujuk masalah dan penyelesaian biasa berikut:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| No power to spindle/CNC. | Loose connections, power outlet issue, faulty power supply. | Check all cable connections. Test the power outlet with another device. If still no power, contact support. |
| Spindle stutters or runs inconsistently. | Insufficient power, incorrect spindle settings. | Ensure the power supply is firmly connected. Verify spindle speed settings in your CNC software are appropriate for 20000RPM. This upgraded power supply is designed to prevent stuttering. |
| Power supply feels hot. | Poor ventilation, prolonged heavy load. | Ensure adequate airflow around the unit. Reduce continuous heavy load if possible. The built-in circuit helps manage heat. |
If the problem persists after attempting these solutions, please contact Genmitsu customer support for further assistance.
8. Spesifikasi
| Atribut | Nilai |
|---|---|
| Nombor Model | GM95-240400-D |
| Input Voltage | 100-240V AC |
| Kekerapan Input | 50/60Hz |
| Keluaran Voltage | 24V DC |
| Arus Keluaran | 4A |
| Bermula Semasa | 8-10A (Peak) |
| Dimensi (L x W x H) | 12.7 x 5.6 x 2 cm (lebih kurang 5.0 x 2.2 x 0.8 inci) |
| Berat Barang | 1.12 paun |
| Pensijilan | CE, FCC, UL |
9. Waranti dan Sokongan
Genmitsu products are backed by a commitment to quality. For warranty information, technical support, or any inquiries regarding your power supply adapter, please visit the official Genmitsu website or contact their customer service team. Details can typically be found on the product packaging or the Genmitsu brand store on Amazon.
Genmitsu Official Store: Visit Genmitsu Store on Amazon
