1. Produk Lebihview
The Grant 230 Real Carbon Fiber Tube and Roll Cage Protector is designed to provide enhanced protection and a refined aesthetic for roll bars, cages, and tubes. Constructed from 100% prepreg dry press carbon fiber, this protector offers high performance with minimal weight. Its durable composition makes it less prone to scratching compared to painted or powder-coated surfaces, ensuring longevity and maintaining the appearance of your vehicle's roll cage.
Rajah 1: Jarak dekat view of the Grant 230 Carbon Fiber Protector, highlighting its distinct weave pattern.
Ciri-ciri Utama:
- Bahan: 100% Prepreg dry press carbon fiber for optimal performance and reduced weight.
- Perlindungan: Designed to cover and protect roll bars, cages, and tubes from wear and scratches.
- Ketahanan: Real carbon fiber construction, free from composite or fiberglass mixes, offers superior resilience.
- Selesai: Provides a sleek appearance while safeguarding the underlying finish.
2. Spesifikasi
| Atribut | Perincian |
|---|---|
| Jenama | Geran |
| Model | 230 |
| Berat Barang | 7.5 auns |
| Dimensi Produk | 31 x 2 x 0.5 inci |
| Luaran | Serat Karbon |
| Nombor Bahagian Pengilang | 230 |
3. Apa yang ada di dalam Kotak
- Carbon Fiber Tube Protector (Quantity: 1)
4. Panduan Pemasangan
This section outlines the general steps for installing the Grant 230 Carbon Fiber Tube and Roll Cage Protector. Ensure you have a clean, dry surface before beginning the installation process.
4.1. Persediaan
- Bersihkan Permukaan: Thoroughly clean the roll bar or tube surface where the protector will be applied. Use a suitable automotive cleaner to remove any dirt, grease, or residue. Ensure the surface is completely dry before proceeding.
- Ujian Kesesuaian: Before removing the adhesive backing, carefully position the carbon fiber protector on the roll bar to ensure proper alignment and fit. This helps in visualizing the final placement.
4.2. Permohonan
- Keluarkan Sandaran Pelekat: Peel off a small section of the red protective film from the double-sided adhesive tape on the back of the carbon fiber protector. Avoid touching the adhesive surface.
- Selaraskan dan Gunakan: Carefully align the protector with the desired position on the roll bar. Begin by pressing down the exposed adhesive section firmly.
- Gradual Adhesion: Slowly peel off the remaining adhesive backing while progressively pressing the protector onto the roll bar. Work from one end to the other, ensuring a smooth, bubble-free application.
- Tekanan Tegas: Once fully applied, press firmly along the entire length of the protector for several minutes to ensure maximum adhesion. Pay extra attention to the edges and any contoured areas.
Figure 2: The carbon fiber protector seamlessly integrated onto a vehicle's roll cage, enhancing its appearance and protection.
Figure 3: A broader perspective of the installed carbon fiber protector, showcasing its fit and finish within the vehicle's interior.
4.3. Installation Video Reference
For a visual guide on the installation process, please refer to the following video demonstrating the application of similar roll bar protective covers:
Video 1: D Pillar Roll Bar Protective Cover Installation. This video illustrates the steps for cleaning the surface, removing adhesive backing, and carefully applying a protective cover to a vehicle's roll bar.
5. Penyelenggaraan
To maintain the appearance and integrity of your Grant Carbon Fiber Tube and Roll Cage Protector, follow these simple guidelines:
- Pembersihan tetap: Lap permukaan dengan lembut, damp cloth to remove dust and light dirt. For more stubborn grime, use a mild automotive interior cleaner.
- Elakkan Bahan Kimia Keras: Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the carbon fiber finish.
- Perlindungan: While durable, avoid direct impact or sharp objects that could scratch or chip the protector.
6. Penyelesaian masalah
If you encounter any issues with your Grant Carbon Fiber Tube and Roll Cage Protector, consider the following:
- Isu Lekatan: If the protector is not adhering properly, ensure the surface was thoroughly cleaned and dry before application. Re-apply firm pressure along the entire length. Extreme temperatures can affect adhesive performance; ensure installation is done in moderate conditions.
- salah jajaran: If the protector is misaligned, it may be difficult to reposition once the adhesive has fully bonded. Careful test fitting before removing the adhesive backing is crucial.
