FBT E580 Series Vector Inverter User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your FBT E580-4T0011 Vector Inverter. This device is a high-performance frequency inverter designed for various industrial applications, including machine tools, textile machinery, cable machinery, petrochemical processing, construction, and transmission systems. It offers robust control with strong torque at low frequencies and a user-friendly interface.

2. Maklumat Keselamatan

⚠ AMARAN

• Rujuk manual arahan sebelum pemasangan dan pengendalian.
• Jangan sambungkan kuasa AC ke terminal output UVW.
• Jangan tanggalkan sebarang penutup semasa menggunakan kuasa dan sekurang-kurangnya 10 minit selepas memutuskan sambungan kuasa.
• Kisar (tanah) peralatan dengan kukuh.

Always ensure that all safety precautions are strictly followed to prevent personal injury or damage to the equipment. Only qualified personnel should perform installation and maintenance.

3. Produk Lebihview

The FBT E580-4T0011 is a robust vector inverter featuring a standard 5-digit two-line LED panel display (LCD keypad optional). It provides intuitive real-time monitoring of nearly a hundred parameters, including electricity usage, running time, input/output voltage and current, and error records. Key features include:

• Strong torque at low frequency: 200% start torque at 0Hz under VC control, 180% start torque at 0Hz under SVC control.
• Built-in system and application macros for simplified parameter setting.
• Hundreds of combinations for torque and revolution settings.
• Programmable 16-segment speed running with independent settings for running time, acceleration/deceleration, and direction.
• Flexible configuration of frequency or rotate speed setting channel priorities.
• Software virtual I/O function for flexible configuration and reduced external interference.
• Abundant warning and protection functions.

4. Persediaan dan Pemasangan

Proper installation is crucial for the inverter's performance and safety. Ensure the installation environment meets the specified conditions (temperature, humidity, ventilation).

4.1. Pemasangan

Mount the inverter vertically on a stable, non-flammable surface, ensuring adequate clearance for ventilation. Avoid direct sunlight, excessive dust, corrosive gases, or vibrations.

4.2. Pendawaian

1. Power Input (R, S, T): Connect the 380V AC power supply to the input terminals. Ensure correct phase sequence.
2. Motor Output (U, V, W): Connect the motor to these terminals. Do not connect AC power here.
3. Grounding (PE): Connect the ground terminal to a reliable earth ground. This is critical for safety.
4. Terminal Kawalan: Wire external control signals (e.g., start/stop, speed reference, fault reset) according to your application and the inverter's terminal diagram (refer to the full manual).

Always ensure power is disconnected before performing any wiring or maintenance.

5. Arahan Operasi

The E580 series inverter features a user-friendly control panel for operation and parameter setting.

5.1. Fungsi Panel Kawalan

• Skrin Paparan: Shows operating status, parameters, and error codes.
• ESC: Exits current menu or cancels operation.
• ARAHAN: Switches between different display modes or enters parameter setting mode.
• Panel/Remote: Bertukar antara mod kawalan tempatan (panel) dan kawalan jauh.
• Directional Arrows (▲ ▼ ◀ ►): Navigasi menu dan laraskan nilai parameter.
• REV/JOG: Reverse direction / Jog operation.
• BERHENTI/SET SEMULA: Stops the motor / Resets faults.
• FWD: Forward direction.

5.2. Operasi Asas

1. Hidupkan kuasa: Apply power to the inverter. The display will light up.
2. Tetapan Parameter: Use the MODE button to enter parameter setting. Navigate with arrow keys and adjust values. Refer to the full manual for detailed parameter descriptions.
3. Mulakan Motor: Press the FWD button for forward rotation or REV/JOG for reverse.
4. Berhenti Motor: Press the STOP/RESET button.
5. Set Semula Kerosakan: If a fault occurs, the display will show an error code. Address the cause, then press STOP/RESET to clear the fault.

6. Penyelenggaraan

Penyelenggaraan berkala memastikan jangka hayat dan operasi inverter anda yang boleh dipercayai.

• Pembersihan: Bersihkan bukaan luar dan pengudaraan inverter secara berkala untuk mengelakkan pengumpulan habuk. Gunakan kain lembut dan kering. Jangan gunakan pembersih cecair.
• Pemeriksaan: Regularly inspect wiring connections for looseness or damage. Check for any signs of overheating or unusual noises.
• Pemeriksaan Kipas: Ensure cooling fans are operating correctly and are free from obstructions.
• Keadaan Persekitaran: Sahkan bahawa persekitaran operasi kekal dalam julat suhu dan kelembapan yang ditetapkan.

Sentiasa putuskan sambungan kuasa sebelum melakukan sebarang penyelenggaraan.

7. Penyelesaian masalah

This section provides guidance for common issues. For complex problems, consult the full manual or contact technical support.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information and technical support, please refer to the official FBT documentation provided with your product or visit the FBT brand store on Amazon:

Visit FBT Store on Amazon

For specific inquiries regarding your E580-4T0011 inverter, please have your model number and purchase details ready when contacting support.