Skagen Men's Holst Automatic Stainless Steel Skeleton Watch (Model SKW6710)

pengenalan

This manual provides essential instructions for the proper use and care of your Skagen Men's Holst Automatic Stainless Steel Skeleton Watch, Model SKW6710. This timepiece features a 42mm stainless steel case, an automatic movement with an open heart dial, and a black leather strap. Please read this guide thoroughly to ensure optimal performance and longevity of your watch.

Imej: Depan view of the Skagen Men's Holst Automatic Stainless Steel Skeleton Watch, showcasing the silver guilloché textured dial, open heart movement, and black leather strap.

Persediaan

1. Membuka kotak dan Pemeriksaan

Carefully remove your watch from its packaging. Inspect the watch for any visible damage or missing components. The package should contain the Skagen Holst watch and this instruction manual.

Image: The white Skagen brand box, typically containing the watch and documentation.

2. Penggulungan Awal

Your Skagen Holst watch is an automatic timepiece, meaning it is powered by the motion of your wrist. It does not use a battery. If the watch has stopped or has not been worn for an extended period, it will require an initial manual winding to start the movement and build up a power reserve.

• To manually wind the watch, ensure the crown (the small knob on the side of the watch) is in its innermost position (position 0).
• Rotate the crown clockwise approximately 20-30 times. You may hear a slight clicking sound. This will provide enough power to start the watch.
• Once started, wearing the watch regularly will keep it wound through your natural arm movements.

3. Menetapkan Masa

• Gently pull the crown out to position 1.
• Rotate the crown either clockwise or counter-clockwise to set the hour and minute hands to the correct time.
• Once the time is set, push the crown back into its innermost position (position 0) to engage the movement and start the watch.

Imej: Sisi view of the watch, highlighting the crown used for winding and setting the time.

4. Melaraskan Tali

The watch features a black leather strap with a buckle closure. Adjust the strap to a comfortable fit on your wrist, ensuring it is not too tight or too loose.

Image: Close-up of the Skagen watch buckle on the leather strap.

Image: The Skagen Holst watch displayed on a wrist, demonstrating its appearance when worn.

Mengendalikan Jam Tangan Automatik Anda

Your Skagen Holst watch is powered by an automatic mechanical movement. This means it harnesses energy from the natural motion of your arm and wrist. It does not require a battery.

• Penggulungan Sendiri: As you wear the watch, an oscillating weight inside the movement rotates, winding the mainspring and storing energy.
• Rizab Kuasa: A fully wound automatic watch typically has a power reserve of approximately 36-40 hours. If the watch is not worn for this duration, it will stop.
• Memulakan semula: If the watch stops, simply manually wind it as described in the 'Initial Winding' section, or wear it for a few hours to allow the automatic mechanism to build up power.

Penyelenggaraan

Membersihkan Jam Tangan Anda

• Sarung dan Kristal: Wipe the stainless steel case and mineral crystal with a soft, dry, lint-free cloth. For stubborn smudges, a slightly damp kain boleh digunakan, diikuti dengan pengeringan segera.
• Tali Kulit: Avoid prolonged exposure of the leather strap to water, direct sunlight, and harsh chemicals. Clean with a soft, dry cloth. If the strap becomes damp, allow it to air dry naturally, away from direct heat.

Tahan Air

Your Skagen Holst watch is water resistant up to 30 meters (3 ATM). This rating means the watch is suitable for everyday use and can withstand splashes, rain, or brief immersion in water. It is bukan suitable for showering, bathing, swimming, snorkeling, or any water sports where it might be submerged for extended periods or subjected to high water pressure.

• Sentiasa pastikan mahkota ditolak sepenuhnya ke dalam sebelum sebarang sentuhan dengan air.
• Jangan gunakan mahkota jam tangan semasa jam tangan basah atau tenggelam.

Penyimpanan

When not wearing your watch, store it in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields, which can affect the accuracy of mechanical movements.

Menyelesaikan masalah

• Tonton Tidak Berjalan:
  If your watch has stopped, it likely needs to be wound. Manually wind the watch by rotating the crown clockwise 20-30 times while it is in the innermost position. Alternatively, wear the watch for several hours to allow the automatic movement to build up power.
• Masa Tidak Tepat:
  Automatic watches can experience slight variations in accuracy. If the watch is consistently running too fast or too slow, ensure it is being worn regularly enough to maintain a sufficient power reserve. Exposure to strong magnetic fields can also affect accuracy; keep the watch away from magnets. If the issue persists, professional servicing may be required.
• Moisture Inside the Watch:
  If you notice condensation or moisture inside the watch crystal, this indicates a breach in the water resistance. Immediately take the watch to an authorized service center to prevent further damage to the movement.
• Strap Discomfort or Damage:
  The leather strap is interchangeable. If the strap becomes worn or damaged, it can be replaced with a new 22mm strap.

Spesifikasi

Image: A visual guide illustrating various round watch case sizes, including 42mm, for reference on wrist fit.

Waranti dan Sokongan

For detailed warranty information, please refer to the official Skagen website or contact your authorized retailer. Skagen provides customer support for product inquiries, service, and repairs.

Official Skagen Webtapak: www.skagen.com

Please retain your proof of purchase for any warranty claims or service requests.