Manual Pengguna Sarung Menara Tengah Aerocool Cronus

1. Pengenalan

The Aerocool Cronus mid tower case is designed for high-performance PC builds, featuring a wide and sturdy chassis that supports E-ATX motherboards and offers three additional expansion slots for vertical graphics card installation. This case incorporates an X-shaped RGB LED front panel and a full tempered glass side panel, providing both aesthetic appeal and a clear view of internal components. It includes a 6-port PC fan hub for extensive ARGB lighting control and a GPU bracket to ensure graphics card stability. The pre-installed 140mm ARGB rear fan contributes to efficient cooling.

Rajah 1.1: Depan dan sisi view of the Aerocool Cronus Mid Tower Case, highlighting its RGB LED front panel and tempered glass side panel.

2. Ciri-ciri Utama

• Reka Bentuk Dinamik: Features a tempered glass side panel, X-shaped RGB LED front panel, and a 14cm ARGB fan, enhancing the visual appeal of your PC build.
• GPU Bracket: An integrated GPU bracket provides stability for your graphics card, preventing sagging and ensuring reliable performance.
• Sistem Pengurusan Kabel: Equipped with 6 cable grommets and 2 cable passthrough tubes for efficient and tidy cable routing, simplifying the build process and improving airflow.
• Maximized Performance: Engineered with a spacious interior and a sturdy chassis to accommodate various components and configurations, allowing for a customized and high-performance system.
• Convenient Connections: Includes a 6-port PC fan hub for connecting motherboards and accessories, offering extensive color combinations and customization options for ARGB lighting.

Figure 2.1: The Aerocool Cronus case integrated into a PC setup, demonstrating its aesthetic and functional presence.

3. Persediaan dan Pemasangan

This section provides general guidelines for setting up your Aerocool Cronus Mid Tower Case. For detailed component-specific instructions, please refer to the manuals provided with your motherboard, power supply, and other hardware.

3.1. Menyediakan Kes

1. Unpack the case carefully and remove all packaging materials.
2. Letakkan bekas di atas permukaan yang stabil dan rata.
3. Remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, non-abrasive surface to prevent scratches.
4. Remove the opposite side panel to access the cable management area.

3.2. Pemasangan Komponen

1. Pemasangan Papan Induk: Install the necessary standoffs for your motherboard form factor (E-ATX, ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard into the case, aligning it with the standoffs, and secure it with screws.
2. Pemasangan Bekalan Kuasa: Mount the power supply unit (PSU) in the designated bottom compartment. Secure it with screws from the rear of the case.
3. Pemasangan Pemacu Storan: Install 2.5" SSDs and 3.5" HDDs into their respective drive bays. Utilize the tool-less mechanisms where available or secure with screws.
4. Pemasangan Kad Grafik (GPU): Insert your graphics card into the appropriate PCIe slot on the motherboard. For vertical GPU installation, use the additional expansion slots and the included GPU bracket. Secure the GPU firmly.
5. Pemasangan Sistem Penyejukan: Install any additional fans or liquid cooling radiators as desired. The case supports various fan configurations and radiator sizes.

3.3. Pengurusan Kabel

Utilize the cable grommets and passthrough tubes located behind the motherboard tray to route power cables and data cables neatly. This improves airflow and gives your build a cleaner appearance.

4. Arahan Operasi

4.1. Menghidupkan

After all components are installed and cables are connected, ensure the power supply switch is in the 'ON' position. Press the power button on the top I/O panel of the case to start your system.

4.2. Kawalan Pencahayaan ARGB

The Aerocool Cronus case features an X-shaped RGB LED front panel and an ARGB rear fan, controlled via a 6-port PC fan hub. Lighting can be managed in two primary ways:

• Butang Kawalan LED: Use the dedicated LED control button on the top I/O panel to cycle through various pre-set lighting effects and colors.
• Perisian Papan Induk: Connect the ARGB hub to a compatible ARGB header on your motherboard (e.g., 5V 3-pin ARGB header). This allows you to synchronize lighting effects across all compatible components using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync). Refer to your motherboard manual for specific software instructions.

5. Penyelenggaraan dan Penjagaan

Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat sarung PC anda.

• Pembersihan Habuk: Periodically clean dust filters (if present) and internal components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Pembersihan Luaran: Lap permukaan luar, termasuk panel kaca terbaja, dengan lembut, damp kain. Elakkan pembersih atau pelarut yang kasar yang boleh merosakkan kemasan.
• Pemeriksaan Kabel: Occasionally check internal cable connections to ensure they are secure and not obstructing airflow.

6. Penyelesaian masalah

Bahagian ini menangani isu biasa yang mungkin anda hadapi dengan sarung PC anda.

7. Spesifikasi

Below are the technical specifications for the Aerocool Cronus Mid Tower Case.

Rajah 7.1: Dimensi lebihview and motherboard compatibility of the Aerocool Cronus case.

8. Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan teknikal, sila rujuk laman web rasmi AeroCool webtapak atau hubungi bahagian perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk tuntutan waranti.

• Sokongan dalam talian: Lawati AeroCool official webtapak for FAQs, drivers, and support resources.
• Perkhidmatan Pelanggan: Contact AeroCool customer support for assistance with product issues or warranty inquiries.