Manual Pengguna Basikal Elektrik Lipat Vivi FM20UL 20 inci

1. Pengenalan

Thank you for choosing the Vivi FM20UL 20-inch Folding Electric Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your electric bicycle. Please read this manual thoroughly before your first ride to ensure proper usage and to maximize your riding experience.

Your Vivi electric bike is designed for urban commuting and recreational use, offering a blend of power, portability, and convenience. It features a 500W motor (750W peak), a 48V removable battery, and a 7-speed gear system. This model is Diperakui UL 2849, ensuring compliance with electrical safety standards for electric bicycles.

Image: UL 2849 Certification details for Vivi electric bikes. This image displays a certificate of compliance from SGS, indicating that Vivi electric bikes, including the FM20UL model, meet the UL 2849 standard for electrical safety. A QR code is also visible for scanning to verify the certificate.

For more details on the UL certification, please visit: SGS Certificate of Compliance

2. Garis Panduan Keselamatan

Keselamatan anda adalah yang paling utama. Sentiasa patuhi garis panduan berikut:

• Pakai helmet: Sentiasa pakai topi keledar basikal yang diluluskan dan sesuai dengan betul.
• Patuhi Undang-undang Lalu Lintas: Patuhi semua undang-undang, peraturan dan papan tanda lalu lintas tempatan.
• Semakan Pra-Tunggangan: Before each ride, inspect brakes, tires (pressure and condition), battery charge, and ensure all quick releases and fasteners are secure.
• Keterlihatan: Use lights at night or in low-light conditions. Wear reflective clothing.
• Keadaan Cuaca: Exercise caution when riding in wet conditions, as braking distance increases.
• Had Berat: Jangan melebihi kapasiti beban maksimum 265 lbs (120 kg).
• Nombor Siri: The security serial number is located in a hidden place on the front of the bicycle. Please record it for your records, as it can assist in recovery if the e-bike is lost.

3. Kandungan Pakej

Upon unpacking your Vivi FM20UL electric bike, please verify that all components are present:

• Vivi FM20UL Folding Electric Bike (pre-assembled with battery installed)
• Pengecas Bateri
• Kit Alat
• Manual Pengguna (dokumen ini)

4. Pemasangan dan Persediaan Awal

Your Vivi FM20UL electric bike arrives approximately 85% pre-assembled. Follow these steps for final assembly:

1. Unfold the Bike: Carefully unfold the frame and secure the folding mechanisms.
2. Pasang Hendal: Insert the handlebar stem into the fork tube and tighten securely. Adjust the handlebar height and angle for comfort.
3. Pasang Tiang Tempat Duduk: Insert the seat post into the frame tube. Adjust the seat height so your feet can comfortably touch the ground when stopped, and your legs have a slight bend at the bottom of the pedal stroke. Secure the quick-release lever.
4. Pasang Pedal: Identify the left (L) and right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Ensure they are fully threaded and tightened.
5. Semak Sambungan: Verify all electrical connections are secure and all bolts and fasteners are tightened.
6. Mengecas Bateri: Fully charge the battery before your first ride. Refer to the 'Battery Information' section for details.

Image: The Vivi FM20UL 20-inch Folding Electric Bike in its unfolded state, ready for use. The image shows the white frame, fat tires, front headlight, rear rack, and the folding mechanism near the center of the frame. A smaller inset image shows the bike in its folded configuration.

5. Komponen Selesaiview

Familiarize yourself with the main components of your electric bike:

• Bingkai: Lightweight aluminum alloy, foldable design.
• Motor: 500W brushless rear hub motor (750W peak power).
• ​Battery: 48V 7.8Ah (374.4Wh) removable Lithium-ion battery, integrated into the frame.
• paparan: LED 3-speed smart meter for speed, battery level, and assist mode selection.
• Gear: 7-speed gear shift system.
• Brek: Brek cakera mekanikal hadapan dan belakang.
• Tayar: 20" x 2.4" anti-slip resistant thick tires.
• Penggantungan: Front suspension fork for improved ride comfort.

Imej: A terperinci view of the 500W rear wheel drive motor and cassette on the Vivi electric bike. The image highlights the robust construction of the motor, which provides power assistance for riding.

Image: A close-up of the Vivi electric bike's frame, showing the integrated and removable 48V 7.8Ah battery. The image also indicates the charging port and key protection mechanism for the battery.

Image: An illustration of the front shock absorption system on the Vivi electric bike. The image highlights the suspension fork, designed to reduce bumps and provide a smoother ride.

6. Arahan Operasi

6.1 Hidupkan/Mati Kuasa

• Untuk Menghidupkan: Press and hold the 'M' button on the LCD display for a few seconds.
• Untuk Mematikan: Press and hold the 'M' button again until the display turns off.

6.2 Mod Menunggang

Your Vivi electric bike offers five distinct riding modes:

• Electric Mode (Throttle Only): Provides power without pedaling. Use the throttle lever on the handlebar. Range: 22-25 miles.
• Mod Bantuan Kayuh: The motor provides assistance as you pedal. Select from 5 speed assist levels using the '+' and '-' buttons on the display. Range: 44-50 miles.
• Mod Basikal Biasa: The electric system is off, and you pedal the bike like a traditional bicycle.
• Cruise Control Mode: Activates a constant speed without holding the throttle. Consult the full display manual for activation details.
• Mod Bantuan Berjalan: Provides low-speed motor assistance for walking the bike, useful for pushing it up inclines.

Image: The Vivi electric bike's LCD smart meter and handlebar controls. The display shows speed, battery level, and assist level. Illustrations above the display depict the three primary riding modes: Electric mode, Pedal assist mode, and Normal bike mode.

6.3 Penukaran Gear

Your bike is equipped with a 7-speed gear system. Use the shifter on the right handlebar to change gears. Shift to lower gears for climbing hills and higher gears for flat terrain or downhill riding.

6.4 Brek

The bike features front and rear disc brakes. Apply both brake levers simultaneously for effective and controlled stopping. Practice braking in a safe area to become familiar with their response.

7. Maklumat Bateri

The Vivi FM20UL is powered by a 48V 7.8Ah (374.4Wh) removable Lithium-ion battery.

7.1 Mengecas Bateri

• Masa Pengecasan: Pengecasan penuh biasanya mengambil masa 4-6 jam.
• Prosedur pengecasan: Connect the charger to a standard household outlet and then to the bike's charging port. The indicator light on the charger will change when charging is complete.
• Bateri boleh tanggal: For convenience and security, the battery can be removed for charging indoors. To remove, first fold the e-bike, then unlock and slide the battery out of the frame.

7.2 Penjagaan dan Penyelenggaraan Bateri

• Avoid fully discharging the battery. Recharge regularly, even if not used frequently.
• Simpan bateri di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.
• Use only the charger provided by Vivi.
• Jangan dedahkan bateri kepada air atau lembapan.

8. Arahan Lipatan

The Vivi FM20UL is designed for easy folding and storage. Follow these steps to fold and unfold your bike:

8.1 Folding the Bike

1. Turunkan tiang tempat duduk ke kedudukan terendah.
2. Fold down the handlebars by releasing the quick-release lever on the stem.
3. Locate the main frame folding latch (usually near the center of the frame). Release the safety catch and open the latch to fold the frame in half.
4. Ensure all folded parts are secured to prevent accidental unfolding during transport.

8.2 Membuka Lipatan Basikal

1. Carefully unfold the frame until the main frame latch clicks into place. Secure the safety catch.
2. Raise and secure the handlebar stem.
3. Adjust the seat post to your desired riding height and secure it.
4. Perform a quick safety check before riding.

Image: The Vivi electric bike shown in both its unfolded and folded configurations, demonstrating its space-saving design. The image also provides key dimensions for the bike, including adjustable seat and handlebar heights, and overall length.

9. Penyelenggaraan

Penyelenggaraan berkala memastikan ketahanan dan operasi basikal elektrik anda yang selamat.

• Tekanan Tayar: Check tire pressure before each ride. Maintain pressure within the recommended range (typically found on the tire sidewall).
• Pemeriksaan Brek: Periksa pad brek secara berkala untuk haus dan tuil brek untuk ketegangan yang betul. Laraskan atau gantikan mengikut keperluan.
• Pelinciran rantai: Pastikan rantai bersih dan dilincirkan untuk memastikan pertukaran gear yang lancar dan mencegah karat.
• Pemeriksaan Pengikat: Periksa semua bolt, nat dan pelepas cepat secara berkala untuk memastikan ia ketat dan selamat.
• Pembersihan: Bersihkan basikal dengan damp kain dan sabun lembut. Elakkan mencuci dengan tekanan tinggi, terutamanya berhampiran komponen elektrik.
• Terminal Bateri: Pastikan terminal bateri bersih dan bebas daripada kakisan.

10. Penyelesaian masalah

Berikut ialah beberapa isu biasa dan potensi penyelesaiannya:

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Vivi customer support.

11. Spesifikasi

12. Waranti dan Sokongan

Vivi provides a 1-year warranty for the battery and motor components of your electric bike. For any questions, technical assistance, or warranty claims, please contact Vivi customer support through your purchase platform or the official Vivi webtapak.