1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your Aerocool Trinity Mini TRINITYMINIBKV2 Mini ATX Tower Case. This compact PC case features a tempered glass side panel and pre-installed FRGB fans, designed for Micro ATX and Mini ITX motherboards. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Aerocool Trinity Mini TRINITYMINIBKV2 PC Case. This image shows the front and side view of the black PC case, highlighting the tempered glass panel and the illuminated FRGB fans.
2. Maklumat Keselamatan
- Always disconnect the power supply from the wall outlet before installing or servicing any components inside the PC case.
- Handle the tempered glass side panel with extreme care. Tempered glass can shatter if dropped or struck with force.
- Avoid exposing the case to extreme temperatures, high humidity, or direct sunlight.
- Keep all small parts, screws, and accessories out of reach of children.
- Ensure proper ventilation around the PC case to prevent overheating.
- Do not attempt to modify the case or its components, as this may void your warranty and pose a safety risk.
3. Kandungan Pakej
Sahkan bahawa semua item yang disenaraikan di bawah terdapat dalam pakej anda:
- Aerocool Trinity Mini TRINITYMINIBKV2 PC Case (Black)
- Pre-installed FRGB Fans (2x 12cm front, 1x 12cm rear)
- Accessory Kit (various screws, motherboard standoffs, cable ties)
- Manual Pengguna (dokumen ini)
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nama Model | TRINITYMINIBKV2 |
| Jenis Kes | Mini ATX Tower |
| Keserasian Papan Induk | Mikro ATX, Mini ITX |
| Dimensi (L x W x H) | 13.9 x 8.11 x 15.16 inci (353 x 206 x 385 mm) |
| Berat badan | 9.9 paun (4.5 kg) |
| bahan | Steel, Tempered Glass (side panel) |
| Pelabuhan I / O Depan | 1x USB 3.0, 1x USB 2.0, HD Audio & Mic |
| Peminat prapasang | 2x 12cm FRGB (Front), 1x 12cm FRGB (Rear) |
| Kaedah Penyejukan | Air, Water (supports radiators) |
| Pemasangan Bekalan Kuasa | Pelekap Bawah |
5. Panduan Persediaan dan Pemasangan
Follow these steps to install your PC components into the Aerocool Trinity Mini TRINITYMINIBKV2 case.
5.1. Menyediakan Kes
- Letakkan bekas di atas permukaan yang rata dan stabil.
- Carefully remove the tempered glass side panel by unscrewing the thumbscrews at the rear of the case. Set the panel aside on a soft, non-abrasive surface.
- Remove the opposite steel side panel by unscrewing its thumbscrews and sliding it backward.
5.2. Pemasangan Papan Induk
- Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
- Align your Micro ATX or Mini ITX motherboard with the pre-installed standoffs inside the case. Ensure the screw holes on the motherboard match the standoffs.
- Secure the motherboard using the appropriate screws from the accessory kit. Do not overtighten.
5.3. Storage Drive Installation (HDDs/SSDs)
The case supports various storage configurations. Refer to the case interior for specific drive bay locations.
- For 3.5" HDDs: Slide the drive into the designated drive cage bays and secure with screws.
- For 2.5" SSDs: Mount the SSDs onto the dedicated mounting points, typically behind the motherboard tray or on top of the PSU shroud, and secure with screws.
5.4. Pemasangan Unit Bekalan Kuasa (PSU).
- Position your PSU into the bottom-mounted PSU shroud area.
- Jajarkan PSU dengan lubang skru di bahagian belakang kes itu.
- Secure the PSU using the four screws provided in your PSU's accessory kit or the case's accessory kit.
5.5. Fan and Cooling System Installation
The case comes with two 12cm FRGB fans pre-installed at the front and one 12cm FRGB fan at the rear. These fans provide fixed RGB lighting effects.
- Additional Fans: The case supports additional fans at the top. Refer to the product specifications for maximum fan sizes and quantities.
- Penyejukan Cecair: Radiators can be installed at the front or top of the case, depending on size. Ensure proper clearance with other components.
- Connect all fan power cables to appropriate headers on your motherboard or a fan controller.
5.6. Pengurusan Kabel
Effective cable management improves airflow and aesthetics.
- Route cables through the cutouts and grommets behind the motherboard tray.
- Use the included cable ties to bundle and secure cables, keeping them tidy and out of the main airflow path.
- Sambungkan semua kabel kuasa yang diperlukan dari PSU ke papan induk, GPU dan pemacu storan.
- Connect the front panel I/O cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their respective headers on the motherboard. Refer to your motherboard manual for correct pin assignments.
5.7. Perhimpunan Akhir
- Once all components are installed and cables are managed, reattach the steel side panel and secure it with thumbscrews.
- Carefully reattach the tempered glass side panel and secure it with its thumbscrews.
6. Arahan Operasi
6.1. Menghidupkan/Mematikan
- Hidupkan kuasa: Press the power button located on the top front panel of the case.
- Matikan: Initiate a shutdown from your operating system. Alternatively, press and hold the power button for several seconds for a forced shutdown (not recommended for regular use).
- Tetapkan semula: Press the reset button on the top front panel to restart the system.
6.2. FRGB Fan Operation
The pre-installed fans feature Fixed RGB (FRGB) lighting. This means the fans display a fixed spectrum of colors and do not offer customizable lighting effects or synchronization with motherboard RGB software. The lighting will activate automatically when the fans receive power.
7. Penyelenggaraan
Penyelenggaraan tetap membantu memastikan prestasi optimum dan jangka hayat komponen PC anda.
- Penapis Habuk: Periodically check and clean any removable dust filters (e.g., at the front, top, or bottom of the case). Use compressed air or rinse with water (ensure completely dry before reinstallation).
- Case Exterior: Lap permukaan luar dengan lembut, damp kain. Elakkan pembersih atau pelarut yang melelas.
- Peminat: Use compressed air to gently clean dust from fan blades. Do not attempt to lubricate or disassemble the fans.
- Pembersihan Dalaman: With the power off and unplugged, use compressed air to remove dust buildup from internal components.
8. Penyelesaian masalah
Jika anda menghadapi masalah, rujuk langkah penyelesaian masalah biasa berikut:
- Tiada Kuasa:
- Ensure the PSU is switched on at the back.
- Periksa semua sambungan kuasa ke papan induk dan komponennya.
- Verify front panel power switch cables are correctly connected to the motherboard.
- Fans Not Spinning / RGB Not Working:
- Check fan power connections to the motherboard or fan controller.
- Ensure FRGB fans are receiving power. Remember, FRGB lighting is fixed and not software controllable.
- Terlalu panas:
- Ensure all fans are spinning correctly and are oriented for proper airflow (intake/exhaust).
- Bersihkan sebarang penapis habuk dan komponen dalaman.
- Verify adequate space around the case for ventilation.
- Panel Depan USB/Audio Tidak Berfungsi:
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the correct headers on your motherboard.
9. Waranti dan Sokongan
Untuk maklumat jaminan dan sokongan teknikal, sila rujuk laman web rasmi AeroCool webtapak atau hubungi peruncit anda. Simpan bukti pembelian anda untuk tuntutan waranti.
AeroCool Official Webtapak: www.aerocool.io





