pengenalan
Thank you for choosing the Ferm 20 Volt 1.5 Ah Cordless Drill/Driver. This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Designed for versatility, this aluminum drill/driver features a 6 mm drilling function, making it ideal for various home and workshop tasks. Please read this manual thoroughly before first use and keep it for future reference.
Arahan Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan asas apabila menggunakan alatan elektrik untuk mengurangkan risiko kebakaran, renjatan elektrik dan kecederaan diri.
- Keselamatan Kawasan Kerja: Pastikan kawasan kerja anda bersih dan terang. Kawasan bersepah atau gelap mengundang kemalangan. Jangan kendalikan alatan kuasa dalam atmosfera yang mudah meletup, seperti di hadapan cecair mudah terbakar, gas atau habuk.
- Keselamatan Elektrik: Elakkan sentuhan badan dengan permukaan yang dibumikan atau dibumikan. Jangan dedahkan alatan kuasa kepada hujan atau keadaan basah.
- Keselamatan Diri: Sentiasa pakai pelindung mata. Gunakan perlindungan pendengaran apabila beroperasi untuk tempoh yang lama. Berpakaian dengan betul; elakkan pakaian atau barang kemas yang longgar.
- Penggunaan dan Penjagaan Alat: Jangan paksa alat kuasa. Gunakan alat kuasa yang betul untuk aplikasi anda. Putuskan sambungan pek bateri daripada alat kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alatan kuasa.
- Keselamatan Pek Bateri: Recharge only with the charger specified by the manufacturer. Do not disassemble, open, or shred battery packs. Do not expose battery packs to heat or fire.
Produk Selesaiview
Familiarize yourself with the components of your Ferm Cordless Drill/Driver.
Rajah 1: Depan view of the Ferm 20 Volt 1.5 Ah Cordless Drill/Driver. This image shows the main body of the drill, including the chuck, torque setting ring, speed selector, trigger, and the attached 20V 1.5Ah battery pack.
Figure 2: The Ferm Cordless Drill/Driver alongside its battery charger. This image illustrates the complete package, including the drill with its battery and the separate charging unit with its power cable.
Figure 3: The durable black carrying case for the Ferm Cordless Drill/Driver. This image shows the compact and robust case designed for protecting and transporting the tool and its accessories.
Persediaan
Mengecas Bateri
- Sambungkan pengecas ke salur keluar kuasa standard.
- Masukkan pek bateri ke dalam pengecas. Pastikan ia berbunyi klik pada tempatnya.
- The charging indicator light on the charger will illuminate (refer to charger manual for specific light indications).
- Setelah dicas sepenuhnya, keluarkan bateri daripada pengecas.
Nota: Fully charge the battery before first use. The battery is a 20 Volt Lithium-ion type.
Memasang/Menanggalkan Mata Gerudi
- Ensure the drill is switched off and the battery pack is removed for safety.
- Putar chuck lawan jam untuk membuka rahang.
- Insert the drill bit or screwdriver bit into the chuck, ensuring it is centered.
- Putar chuck mengikut arah jam untuk mengetatkan rahang dengan selamat di sekeliling bit.
- To remove, rotate the chuck counter-clockwise until the jaws open, then pull out the bit.
Beroperasi
Menghidupkan/Mematikan
- To turn on, press the trigger switch. The speed increases with pressure.
- To turn off, release the trigger switch.
Putaran Maju/Undur
The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (for drilling and tightening screws) and to the right for reverse rotation (for loosening screws).
Tetapan Tork
The torque setting ring is located behind the chuck. Rotate it to select the desired torque level. Lower settings are for driving small screws or working with soft materials, while higher settings are for larger screws or harder materials. The drill also has a dedicated drilling mode for maximum power without clutch engagement.
Drilling and Screwdriving Tips
- Sentiasa pegang alat dengan kuat dengan kedua-dua tangan.
- Sapukan tekanan yang mantap, sekata. Jangan paksa gerudi.
- For drilling, start with a pilot hole if necessary, especially in hard materials.
- For screwdriving, ensure the bit is fully seated in the screw head to prevent stripping.
Penyelenggaraan
Pembersihan
- Bersihkan slot pengudaraan alat secara kerap untuk mengelakkan terlalu panas.
- Gunakan yang lembut, damp kain untuk mengelap bahagian luar. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
- Keep the chuck jaws free of dust and debris.
Penyimpanan
- Store the drill/driver and battery pack in a cool, dry place, away from direct sunlight and moisture.
- Jika menyimpan untuk tempoh yang lama, pastikan bateri dicas separa (sekitar 50%) untuk memanjangkan jangka hayatnya.
- Store the tool in its original carrying case for protection.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Gerudi tidak bermula. | Bateri tidak dicas atau tidak dimasukkan dengan betul. | Charge battery. Ensure battery is fully seated. |
| Kehilangan kuasa semasa operasi. | Battery low or overloaded. | Isi semula bateri. Kurangkan tekanan pada alat. |
| Sedikit tergelincir dalam chuck. | Chuck tidak diketatkan dengan cukup atau batang mata bor kotor. | Tighten chuck firmly. Clean bit shank. |
| Terlalu panas. | Slot pengudaraan tersumbat atau penggunaan berat berterusan. | Clean ventilation slots. Allow tool to cool down. |
Spesifikasi
- Jenama: Ferm
- model: 20 Volt 1.5 Ah Cordless Drill/Driver
- Voltage: 20 Volt
- Jenis Bateri: Lithium-ion (1.5 Ah)
- Chuck Size (Max): 6 milimeter
- Bahan: aluminium
- Sumber Kuasa: Dikuasakan Bateri
Waranti dan Sokongan
Ferm products are manufactured to high quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Ferm webtapak. Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.
For further assistance, you may contact Ferm customer service through their official channels. Always provide your product model number and purchase details when seeking support.
