CRAFTSMAN 80,000 BTU Forced Air Kerosene/Diesel Portable Heater Instruction Manual

1. Maklumat Keselamatan

Read and understand all instructions before operating this heater. Failure to follow these instructions may result in fire, explosion, electric shock, or serious injury.

• Pengudaraan: Always ensure adequate ventilation when operating the heater. This unit is designed for use in indoor/outdoor construction and commercial environments where proper ventilation is available.
• Bahan api: Use only Kerosene, #1 and #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not use gasoline or other volatile fuels.
• penempatan: Position the heater on a stable, level surface. Maintain clear distances from combustible materials as specified in the operating manual.
• Operasi: Never leave the heater unattended while burning. Keep children and pets away from the heater.
• Ciri-ciri Keselamatan: This heater is equipped with a high temperature safety shut-off switch and a photo cad cell flame sensor to ensure safe operation.

2. Produk Lebihview

The CRAFTSMAN 80,000 BTU Forced Air Portable Heater is a robust heating solution designed for demanding environments such as garages, workshops, job sites, and farms. It features durable steel construction, a factory-installed thermostat, and the versatility to run on multiple fuel types including kerosene, diesel, and JP-8 without conversion. The unit is capable of heating up to 2,000 square feet.

Figure 1: CRAFTSMAN 80,000 BTU Forced Air Portable Heater, side view.

3. Persediaan

3.1 Membongkar dan Memasang

• Keluarkan pemanas dari bungkusannya dengan berhati-hati.
• Inspect the unit for any damage. If damaged, do not operate and contact customer service.
• Attach the handle using the provided screws. This is the only assembly required.

Figure 2: Close-up of the heater's handle for portability.

3.2 Fueling the Heater

• Ensure the heater is turned OFF and unplugged before fueling.
• Unscrew the fuel cap located on the top of the fuel tank.
• Fill the tank with clean Kerosene, #1 or #2 Diesel Fuel, or JP-8 (Jet A Fuel). Do not overfill.
• Monitor the fuel gauge to prevent overfilling.
• Gantikan penutup bahan api dengan selamat.

Figure 3: Fuel cap location for filling the tank.

Figure 4: Fuel gauge indicating fuel level.

3.3 Peletakan dan Sambungan Kuasa

• Letakkan pemanas pada permukaan yang kukuh dan rata.
• Ensure adequate ventilation. This heater is suitable for indoor/outdoor construction and commercial environments with proper air circulation.
• Keep the heater at a safe distance from walls, furniture, and any combustible materials.
• Plug the heater into a properly grounded 110V/120V AC outlet.

4. Arahan Operasi

4.1 Menghidupkan Pemanas

• Ensure the heater is fueled and properly connected to power.
• Turn the power switch to the 'ON' position. The heater will begin its ignition sequence.
• The photo cad cell flame sensor will detect the flame, and the heater will start producing heat.

Figure 5: Control panel showing the power switch and thermostat dial.

4.2 Melaraskan Suhu

• Use the thermostat control dial on the control panel to set the desired temperature.
• Pemanas akan hidup dan mati secara automatik untuk mengekalkan suhu yang ditetapkan.

4.3 Mematikan

• Turn the power switch to the 'OFF' position.
• Allow the heater to cool down completely before unplugging or moving.

5. Penyelenggaraan

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is OFF, unplugged, and cool before performing any maintenance.

• Pembersihan: Keep the exterior of the heater clean. Use a soft, damp kain. Jangan gunakan pembersih yang kasar.
• Penapis Bahan Api: Refer to the owner's manual for instructions on checking and cleaning the fuel filter.
• Split Upper Shell: The unit features a split upper shell design for easy access during maintenance.
• Storan: Apabila menyimpan pemanas untuk tempoh yang lama, pastikan tangki bahan api kosong dan unit bersih dan kering. Simpan di tempat yang sejuk dan kering.

6. Penyelesaian masalah

If your heater is not operating correctly, consult the following common issues before contacting customer support:

7. Spesifikasi

Figure 6: Product dimensions for the portable heater.

8. Waranti dan Sokongan

For warranty information, technical support, or to order replacement parts, please refer to the official CRAFTSMAN product manual included with your heater or visit the CRAFTSMAN webtapak. Simpan resit pembelian anda untuk tuntutan waranti.