Como Audio Analog Turntable (Model CATA) Instruction Manual

pengenalan

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Como Audio Analog Turntable, Model CATA. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image: The Como Audio Analog Turntable, featuring a walnut wood plinth, black platter, and tonearm.

Imej: A terperinci view of the rich walnut finish on the turntable's plinth, showcasing the wood grain.

Kandungan Pakej

Before proceeding with setup, ensure all components are present and undamaged:

• Como Audio Analog Turntable unit
• Pre-mounted Ortofon cartridge/stylus
• Platter
• Tali Pusing
• Removable clear dust cover
• Tikar terasa
• Kabel audio
• Power supply (15V/0.8A, universal 110V-240V, 50-60Hz)
• Manual Arahan (dokumen ini)

Arahan Persediaan

1. Membongkar dan Meletakkan

• Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
• Letakkan meja putar pada permukaan yang stabil dan rata dari cahaya matahari langsung, sumber haba dan getaran yang berlebihan.

2. Pemasangan Pinggan dan Tali Pinggang Pemacu

• Place the platter onto the spindle located on the turntable plinth.
• Locate the drive belt. Gently stretch the belt around the motor pulley (small metal cylinder) and the inner rim of the platter. Ensure the belt is not twisted.

3. Cartridge and Stylus

The Como Audio Analog Turntable comes with a premium Ortofon cartridge and stylus pre-mounted. No adjustment of counterweight or anti-skating is required for initial setup.

4. Pemasangan Penutup Habuk

Image: Detail of the removable clear dust cover, designed to protect the turntable from dust.

• Carefully align the hinges of the clear dust cover with the corresponding slots on the rear of the turntable plinth.
• Gently push down until the dust cover is securely in place. The dust cover is removable for cleaning or when not in use.

5. Sambungan Audio

The turntable offers selectable Line output or Phono output. Choose the appropriate connection for your audio system:

• Line Output (Integrated Phono Pre-Amp): Use this option if your amplifier or music system (e.g., Como Audio music system) has an Auxiliary (AUX) input and does not have a dedicated Phono input. Connect the included audio cable from the turntable's Line Out to your system's AUX input.
• Keluaran Phono: Use this option if your amplifier or music system has a dedicated Moving Magnet (MM) Phono input. Connect the included audio cable from the turntable's Phono Out to your system's Phono input. Ensure your amplifier's Phono input is selected.

Nota: If experiencing a humming noise, ensure proper grounding. Some audio systems may require a separate ground wire connection if available on your amplebih hidup.

6. Sambungan Kuasa

• Connect the power supply cable to the DC input jack on the rear of the turntable.
• Palamkan penyesuai kuasa ke salur keluar dinding yang sesuai.

Arahan Operasi

1. Powering On and Speed Selection

• Locate the integrated power and speed control switch, typically on the bottom left side of the turntable plinth.
• Turn the switch to select either 33 1/3 RPM for LPs or 45 RPM for singles. The platter will begin to spin.

2. Memainkan Rekod

Image: The turntable with a record spinning on the platter, and the tonearm positioned over the record.

• Letakkan tikar felt di atas pinggan.
• Carefully place a vinyl record onto the felt mat.
• Angkat lengan atas perlahan-lahan menggunakan tuil isyarat.
• Position the stylus over the desired starting groove of the record.
• Perlahan-lahan turunkan tuil isyarat untuk membolehkan stylus turun ke atas rekod.
• Adjust the volume on your connected audio system.

3. Menghentikan Main Semula

• Pada akhir rakaman, atau apabila anda ingin menghentikan main balik, angkat lengan nada perlahan-lahan menggunakan tuil isyarat.
• Return the tonearm to its rest position and secure it with the tonearm clip.
• Turn the power/speed switch to the "Off" position to stop the platter from spinning.
• Nota: This turntable does not feature an automatic shut-off function. The platter will continue to spin until manually turned off.

Penyelenggaraan

1. Membersihkan Meja Putar

• Always power off and unplug the turntable before cleaning.
• Use a soft, dry, lint-free cloth to wipe the plinth and platter. Avoid abrasive cleaners or solvents.
• For the dust cover, use a soft cloth and a mild, non-abrasive cleaner if necessary.

2. Penjagaan Stylus

• Regularly clean the stylus using a dedicated stylus brush, brushing gently from back to front.
• Elakkan daripada menyentuh stylus dengan jari anda.
• A worn or damaged stylus can harm your records and degrade sound quality. Replace the stylus when necessary (typically after 500-1000 hours of playback, depending on usage and record condition).

3. Memacu tali pinggang

The drive belt is a wear item. If you notice inconsistent speed or the platter not spinning, the belt may need to be inspected or replaced. Contact Como Audio support for replacement parts.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

For warranty information, technical support, or replacement parts, please contact Como Audio directly through their official weblaman web atau saluran khidmat pelanggan. Simpan resit pembelian anda sebagai bukti pembelian.

Official Como Audio Webtapak: www.comoaudio.com