pengenalan
This manual provides essential instructions for the proper use and care of your Spinnaker Hull SP-5088-05 Automatic Wrist Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. This watch features an automatic mechanical movement and is designed for robust use, including diving.
Image: The Spinnaker Hull SP-5088-05 Automatic Wrist Watch, showcasing its dark blue dial, bronze-tone bezel, and leather strap from an angled perspective.
Persediaan dan Penggulungan Awal
Your Spinnaker Hull SP-5088-05 is an automatic mechanical watch. It is powered by the motion of your wrist and does not require a battery. For initial setup or if the watch has stopped, follow these steps:
- Buka skru Mahkota: The crown is located on the side of the watch case. Gently unscrew it counter-clockwise until it springs free from the case. This is the winding position (Position 0).
- Penggulungan Manual: In Position 0, turn the crown clockwise approximately 30-40 times. This will provide enough power reserve to start the watch. You should feel a slight resistance as you wind.
- Tetapkan Tarikh: Pull the crown out to the first click (Position 1). Turn the crown either clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this period, first set the time outside this window, then set the date, and finally reset the time.
- Tetapkan Masa: Pull the crown out to the second click (Position 2). The second hand will stop. Turn the crown to set the hour and minute hands. To ensure accurate time setting, synchronize with a reliable time source. Push the crown back in to restart the second hand.
- Selamatkan Mahkota: Once the time and date are set, push the crown back into the case and screw it down clockwise firmly until it is tight. This ensures the watch's water resistance.
Imej: Dari dekat view of the Spinnaker Hull SP-5088-05 watch dial, highlighting the hands, luminous markers, date window, and the crown on the right side of the case, which is used for setting the time and date.
Mengendalikan Jam Tangan Anda
Pergerakan Automatik
Once initially wound, your watch will continue to run as long as it is worn regularly. The rotor inside the watch winds the mainspring with the natural motion of your arm. If the watch is not worn for an extended period (typically 40-48 hours, depending on the power reserve), it will stop and require manual winding to restart.
Bezel Berputar Satu Arah
The Spinnaker Hull SP-5088-05 features a unidirectional rotating bezel. This bezel is designed for timing events, particularly dives. To use it:
- Putar bezel lawan arah jam untuk menyelaraskan penanda sifar dengan jarum minit.
- The minute hand will then indicate the elapsed time against the bezel's scale.
- The unidirectional design prevents accidental clockwise rotation, which could falsely indicate less elapsed time during a dive, enhancing safety.
Water Resistance (300 Meters / 1000 Feet)
This watch is rated for 300 meters (30 ATM) of water resistance, making it suitable for professional marine activity and serious surface water sports, but not for saturation diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown or pushers (if present) while the watch is wet or submerged.
Image: The Spinnaker Hull SP-5088-05 watch worn on a wrist, demonstrating its appearance and fit during daily use.
Penyelenggaraan dan Penjagaan
- Pembersihan: Wipe the watch case and crystal with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the crown is fully screwed down. Avoid harsh chemicals or abrasive materials.
- Leather Strap Care: The leather strap is susceptible to damage from water, sweat, and direct sunlight. Avoid prolonged exposure to moisture. If the strap gets wet, dry it gently with a soft cloth and allow it to air dry completely away from direct heat. Regular cleaning with a specialized leather cleaner can help maintain its condition.
- Elakkan Suhu Melampau: Do not expose your watch to sudden temperature changes or extreme heat/cold, as this can affect the movement and seals.
- Medan Magnet: Keep your watch away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as magnetism can affect the accuracy of mechanical movements.
- Servis: Mechanical watches benefit from periodic servicing, typically every 3-5 years, to ensure optimal performance and lubrication of the movement. Contact an authorized service center for professional maintenance.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Jam tangan telah berhenti atau berjalan perlahan. | Rizab kuasa tidak mencukupi (tidak cukup haus atau tidak dililit secara manual). | Manually wind the watch by unscrewing the crown and turning it clockwise 30-40 times. Wear the watch regularly. |
| Tarikh bertukar pada tengah hari dan bukannya tengah malam. | The AM/PM setting is incorrect. | Majukan masa sebanyak 12 jam. |
| Jam tangan berjalan terlalu cepat atau terlalu perlahan secara konsisten. | Exposure to magnetic fields, impact, or requires regulation. | Demagnetize the watch or have it regulated by an authorized service center. Avoid strong magnetic fields. |
| Kelembapan di bawah kristal. | Crown not fully screwed down, damaged gasket, or extreme temperature change. | Segera bawa jam tangan ke pusat servis yang sah. Jangan cuba mengeringkannya sendiri. |
Spesifikasi
- model: SP-5088-05 (Hull Diver)
- Pergerakan: Mekanikal Automatik
- Bahan kes: Keluli Tahan Karat
- Diameter Sarung: 42 Milimeter
- Ketebalan Sarung: 14 Milimeter
- Bahan Band: kulit
- Lebar jalur: 22 Milimeter
- Jenis Kancing: Tang Buckle
- Kristal: Kristal Nilam
- Tahan Air: 300 Meter (30 ATM / 1000 Kaki)
- Warna Dail: Biru
- Bezel: Unidirectional Rotating
Imej: Depan view of the Spinnaker Hull SP-5088-05 Automatic Wrist Watch, clearly showing the dark blue dial, luminous markers, and the bronze-tone unidirectional bezel.
Waranti dan Sokongan
Spinnaker watches are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and coverage details.
For technical assistance, service, or warranty claims, please contact Spinnaker customer support or an authorized service center. You can usually find contact information on the official Spinnaker webtapak atau melalui peruncit anda.
Penting: Unauthorized repairs or modifications may void your warranty. Always seek professional assistance for any issues beyond basic operation and care.
