Infinity PRIMUS3000A Primus AmpManual Pengguna yang lebih hidup

pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your Infinity PRIMUS3000A Primus Amppengalir. Sila baca manual ini dengan teliti sebelum cuba memasang atau mengendalikan amplifier to ensure proper function and to prevent damage.

The Infinity PRIMUS3000A is a compact mono amplifier designed to deliver 300W of power. It features full on-board protection and input level control for optimal audio performance.

Maklumat Keselamatan

• Sentiasa putuskan sambungan terminal bateri negatif kenderaan sebelum memulakan sebarang pemasangan.
• Ensure all wiring is properly routed and secured to prevent damage from sharp edges or moving parts.
• Use appropriate gauge wiring for power and ground connections to prevent overheating and potential fire hazards.
• Pasangkan amppemanas di lokasi yang membolehkan pengudaraan yang mencukupi bagi mengelakkan kepanasan melampau.
• Jangan dedahkan amppenguat kepada kelembapan atau suhu yang melampau.
• Jika anda tidak pasti tentang mana-mana bahagian proses pemasangan, berunding dengan profesional yang berkelayakan.

Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• Infinity PRIMUS3000A Primus Amplebih hidup
• Manual Pengguna

Produk Selesaiview

The Infinity PRIMUS3000A amplifier is designed for reliable performance in a compact form factor. Key features include:

• Jejak Padat: Allows for flexible installation in various vehicle types.
• Full On-Board Protection: Safeguards the amplifier against short circuits, over-voltage, bawah-voltage, and thermal overload.
• Kawalan Tahap Input: Adjustable input sensitivity to match the output of your head unit.

AmpSusun atur penguat

Rajah 1: Atas view of the Infinity PRIMUS3000A Primus Amplifier. This image displays the overall compact design of the amplifier, featuring the Infinity logo and model designation on the top panel.

Rajah 2: Control panel of the Infinity PRIMUS3000A Primus Amppengikat. ini view shows the input section with High Input and Line Input terminals, along with adjustable controls for Gain, Level, Frequency (FREQ), Low-Pass Filter (LPF), and Phase.

Rajah 3: Power and speaker connection terminals of the Infinity PRIMUS3000A Primus Amplifier. This image highlights the GND (Ground), REM (Remote), +12V (Power), and Speaker output terminals, along with the dual 15A fuses for protection.

Persediaan dan Pemasangan

Proper installation is crucial for optimal performance and safety. Follow these general guidelines:

1. Lokasi Pemasangan

• Pilih lokasi yang kering, mempunyai pengudaraan yang baik, jauh daripada cahaya matahari langsung dan sumber haba.
• Ensure the mounting surface is sturdy enough to support the ampberat pengalir.
• Berikan ruang yang mencukupi di sekeliling amppenguat untuk peredaran udara.

2. Sambungan Pendawaian

Sebelum membuat sebarang sambungan, cabut terminal negatif bateri kenderaan.

1. Kuasa (+12V): Connect a suitable gauge power cable directly from the vehicle's positive battery terminal to the ampterminal "+12V" pengisi. Pasang pemegang fius sebaris (tidak dibekalkan) dalam jarak 18 inci (45 cm) dari bateri.
2. Tanah (GND): Sambungkan kabel pembumian tolok yang sesuai daripada ampterminal "GND" pengubah suai pada permukaan logam yang bersih dan tidak dicat pada casis kenderaan. Pastikan sambungan elektrik yang baik.
3. Alat Kawalan Jauh (REM): Sambungkan wayar hidup jauh dari output jauh unit kepala anda ke ampTerminal "REM" penghidup. Wayar ini memusingkan amphidupkan dan matikan lampu dengan unit kepala anda.
4. Input Audio:
   • Input Talian (RCA): Sambungkan kabel RCA daripada pra-unit kepala andaamp output kepada amplifier's "LINE INPUT" jacks.
   • High Input (Speaker Level): If your head unit does not have RCA outputs, connect the speaker output wires from your head unit to the amplifier's "HIGH INPUT" terminals.
5. Output pembesar suara: Sambungkan subwoofer anda ke amplifier's "SPEAKER" terminals. Ensure correct polarity (+ to + and - to -). Refer to your subwoofer's specifications for proper impedance matching.

Arahan Operasi

Sebaik sahaja amplifier is installed and wired, follow these steps for initial setup and operation:

1. Kuasa Permulaan: Reconnect the vehicle's negative battery terminal. Turn on your head unit. The amplifier should power on (indicated by an LED, if present).
2. Gain/Level Adjustment:
   • Tetapkan amplifier's "GAIN" or "LEVEL" control to its minimum position.
   • Play a familiar piece of music at a moderate volume on your head unit (around 75% of maximum).
   • Perlahan-lahan tingkatkan ampKawalan penguatan lifier sehingga anda mendengar herotan, kemudian undurkannya sedikit sehingga bunyinya jelas.
3. Penapis Laluan Rendah (LPF): The LPF control allows you to set the upper frequency limit for the subwoofer. Adjust this control (e.g., between 40Hz and 120Hz) to blend the subwoofer's output smoothly with your main speakers.
4. Kawalan Fasa: The "PHASE" switch (0°/180°) helps to align the subwoofer's output with the main speakers. Experiment with both settings to find the one that provides the most impactful and cohesive bass response.

Penyelenggaraan

• Pembersihan: Lap secara berkala ampLap bahagian luar penapis dengan kain yang lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
• Pemeriksaan: Regularly check all wiring connections for tightness and signs of corrosion or damage. Ensure adequate ventilation around the amplebih hidup.
• Sekering: The amplifier is equipped with two 15A fuses. If a fuse blows, replace it only with a fuse of the same type and rating. Never use a higher-rated fuse.

Menyelesaikan masalah

Spesifikasi

Waranti dan Sokongan

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Infinity website. For technical support or service inquiries, please contact Infinity customer service.

As this is a renewed product, please also refer to the Amazon Renewed Guarantee for details regarding replacement or refund options, as mentioned in the product description.