Lampu Dinding Luar LED Silinder Maxxima (Model MEL-14125BW) Manual Arahan

1. Pengenalan

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxxima Cylinder LED Outdoor Wall Light, Model MEL-14125BW. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1: Maxxima Cylinder LED Outdoor Wall Light (Model MEL-14125BW).

2. Maklumat Keselamatan

AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.

• Semua sambungan elektrik mestilah mengikut kod tempatan, ordinan atau Kod Elektrik Kebangsaan (NEC).
• Rujuk kepada juruelektrik yang berkelayakan sekiranya anda tidak mengetahui sambungan kabel elektrik yang betul.
• This fixture is intended for outdoor use and is suitable for wet locations.
• Jangan cuba mengubah suai lekapan atau komponennya.
• Ensure the mounting surface is structurally sound to support the fixture.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:

• 1x Maxxima Cylinder LED Outdoor Wall Light (Model MEL-14125BW)
• Mounting Hardware (screws, wire connectors)
• 1x Sensor Cap (for disabling dusk-to-dawn function)
• Manual Arahan

4. Spesifikasi

5. Arahan Pemasangan

Sebelum Anda Bermula: Ensure power is disconnected at the circuit breaker or fuse box to prevent electric shock.

1. Sediakan Permukaan Pemasangan: Ensure the electrical junction box is securely mounted and the wiring is accessible.
2. Pasang Pendakap Pelekap: Secure the provided mounting bracket to the junction box using the screws. Ensure the bracket is level.


Rajah 2: Belakang view of the fixture with mounting bracket and wiring.

3. Sambungan Wayar:
   • Sambungkan hijau ground wire from the fixture to the house ground wire (usually bare copper or green) using a wire connector.
   • Sambungkan putih fixture wire to the house neutral wire (usually white) using a wire connector.
   • Sambungkan hitam fixture wire to the house hot wire (usually black) using a wire connector.
   • Pastikan semua sambungan selamat.
4. Pasang Lekapan: Sejajarkan lekapan dengan pendakap pelekap dengan berhati-hati dan pasangkannya menggunakan skru yang disediakan. Pastikan tiada wayar yang tersepit.


Figure 3: Installed Maxxima Cylinder LED Outdoor Wall Light providing downlight.

5. Pulihkan Kuasa: Setelah lekapan dipasang dan disambungkan dengan selamat, kembalikan kuasa pada pemutus litar.

Panduan Video Pemasangan

Watch this video for a visual guide on installing the Maxxima Cylinder LED Outdoor Wall Sconce Light.

6. Arahan Operasi

This fixture is equipped with a built-in dusk-to-dawn photocell sensor.

• Operasi automatik: Lampu akan menyala secara automatik pada waktu senja dan padam pada waktu subuh.
• Disabling Dusk-to-Dawn Function: If you prefer to control the light manually or use it in an indoor/up-directional setting, use the included sensor cap. Place the sensor cap over the photocell sensor located on the top of the fixture. This will keep the light on continuously when power is supplied.

Rajah 4: View of the LED array and the photocell sensor on the top of the fixture.

7. Penyelenggaraan

To ensure optimal performance and appearance of your fixture:

• Pembersihan: Bersihkan lekapan dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang kasar, kerana ia boleh merosakkan kemasan atau komponen elektrik.
• Pemeriksaan: Periodically inspect the wiring and mounting for any signs of wear or damage.
• Sumber cahaya LED bersepadu direka untuk kegunaan jangka panjang dan tidak boleh digantikan oleh pengguna.

8. Penyelesaian masalah

If your light fixture is not operating correctly, refer to the following common issues:

• Lampu tidak menyala:
  • Check if the power supply is active at the circuit breaker.
  • Pastikan semua sambungan wayar selamat.
  • Verify the photocell sensor is not obstructed or covered if automatic operation is desired.
  • If the sensor cap is installed, remove it to test automatic operation.
• Lampu kekal menyala pada siang hari:
  • Ensure the photocell sensor is not obstructed by shadows or other light sources (e.g., another bright light fixture nearby).
  • If the sensor cap is installed, this is expected behavior. Remove the cap for dusk-to-dawn functionality.
• Kelipan cahaya:
  • Periksa sambungan wayar yang longgar.
  • Pastikan voltage bekalan adalah stabil.

Jika langkah-langkah ini tidak menyelesaikan masalah, hubungi khidmat pelanggan.

9. Waranti

This Maxxima product is covered by a Waranti terhad 3 tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

10. Sokongan Pelanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webtapak untuk maklumat hubungan semasa.

Visit the Maxxima Store on Amazon