pengenalan
This manual provides essential information for the proper setup, operation, and maintenance of your InFocus Genesis IN118AA DLP Projector. Please read this manual thoroughly before using the projector to ensure optimal performance and longevity.
The InFocus Genesis IN118AA is designed for high brightness and vibrant color projection, suitable for various applications including gaming, thanks to its low latency. Its compact and lightweight design facilitates easy portability and installation.
Produk Selesaiview
Below is an image of the InFocus Genesis IN118AA DLP Projector, highlighting its general appearance and key components.
Rajah 1: InFocus Genesis IN118AA DLP Projector. This image displays the front and top view of the projector. The large lens is prominent on the front, with ventilation grilles visible on the sides and top. The InFocus brand name is visible on the top surface.
Persediaan
1. Membongkar
- Keluarkan projektor dan semua aksesori dengan berhati-hati daripada pembungkusan.
- Verify that all components listed in the packing list are present. The box typically contains the DLP Projector itself.
- Kekalkan pembungkusan asal untuk pengangkutan atau penyimpanan masa hadapan.
2. penempatan
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing it near heat sources or in direct sunlight.
- Dimensi: Approximately 5.25 x 0.31 x 1.66 inches (L x W x H).
- Berat: Kira-kira 5.73 paun.
3. Kuasa Penyambung
- Sambungkan kord kuasa ke input kuasa projektor.
- Palamkan hujung kord kuasa yang lain ke dalam salur keluar elektrik yang dibumikan.
4. Menyambung Sumber Input
The InFocus Genesis IN118AA supports various connectivity options:
- HDMI: For high-definition video and audio. Connect an HDMI cable from your source device (e.g., laptop, gaming console) to the HDMI port on the projector.
- USB: For certain data transfer or power supply functions. Refer to the full product manual for specific USB port capabilities.
Arahan Operasi
1. Menghidupkan/Mematikan
- Untuk Menghidupkan: Press the power button on the projector or the remote control (if included). The indicator light will change, and the projector will begin its startup sequence.
- Untuk Mematikan: Press the power button again. A confirmation message may appear. Press the button a second time to confirm shutdown. Allow the projector to cool down before unplugging it.
2. Adjusting the Image
- Fokus: Putarkan gelang fokus pada kanta sehingga imej tajam dan jelas.
- Pembetulan Keystone: Use the keystone adjustment (manual or digital, depending on model) to correct trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
- Resolusi: The native display resolution is 1920 x 1080 (Full HD). Ensure your source device is set to this resolution for the best image quality.
3. Kegunaan yang Disyorkan
This projector is particularly recommended for Permainan due to its low latency, providing a responsive and immersive experience.
Penyelenggaraan
1. Lamp kehidupan
The InFocus Genesis IN118AA features an ultra-long lamp life. To maximize lamp longevity, ensure proper ventilation and avoid frequent power cycles. Replace the lamp only when necessary, following the instructions in the full product manual.
2. Pembersihan
- Kanta: Gunakan kain lembut dan bebas lin yang direka khusus untuk kanta optik. Jangan gunakan pembersih yang kasar.
- Luaran: Lap bahagian luar projektor dengan kain lembut dan kering. Untuk kotoran degil, sedikit damp kain boleh digunakan, tetapi pastikan tiada kelembapan memasuki peranti.
- Bolong Udara: Periodically clean the air vents to prevent dust buildup, which can impede airflow and cause overheating. Use a soft brush or compressed air.
Menyelesaikan masalah
This section provides solutions to common issues you might encounter. For more complex problems, refer to the full product manual or contact customer support.
- Tiada gambar:
- Ensure the projector is powered on and the power indicator light is active.
- Check all cable connections (HDMI, power) are secure.
- Verify the correct input source is selected on the projector.
- Confirm the source device (e.g., laptop) is outputting a signal.
- Imej Kabur:
- Laraskan cincin fokus pada lensa.
- Pastikan permukaan projektor rata dan projektor stabil.
- Imej ialah Trapezoid:
- Adjust the keystone correction setting.
- Letakkan semula projektor supaya serenjang mungkin dengan skrin.
- Tiada Bunyi (jika berkenaan):
- Check the audio settings on both the projector and the source device.
- Ensure volume is not muted.
- Verify audio cables are correctly connected (if using separate audio).
- Amaran Terlalu Panas:
- Pastikan lubang udara bersih dan tidak tersumbat.
- Provide adequate space around the projector for ventilation.
- Bersihkan habuk dari lubang udara jika perlu.
Spesifikasi
The following table outlines the key technical specifications for the InFocus Genesis IN118AA DLP Projector:
| Ciri | Perincian |
|---|---|
| Jenama | InFokus |
| Nombor Model | IN118AA |
| Berat Barang | 5.73 paun |
| Dimensi Produk | 5.25 x 0.31 x 1.66 inci |
| Ciri Khas | Ringan, Mudah Alih |
| Teknologi Ketersambungan | HDMI, USB |
| Resolusi Paparan | 1920 x 1080 |
| Penggunaan yang Disyorkan | Permainan |
| Tarikh Tersedia Pertama | 16 Disember 2020 |
| Apa yang ada dalam Kotak | Projektor DLP |
Waranti dan Sokongan
Specific warranty terms and conditions for the InFocus Genesis IN118AA DLP Projector are typically provided with the product documentation or can be found on the official InFocus website. Please refer to these resources for detailed warranty information.
For technical support, service, or additional inquiries, please visit the official InFocus support page or contact their customer service department. Contact information is usually available on the manufacturer's webtapak atau dalam manual produk penuh.
