pengenalan
Thank you for choosing the AutoCraft Silicone Coated Vibration Resistant Rough Service Shop Light Bulb. This incandescent bulb is engineered for durability and reliability in demanding environments such as workshops and garages. With its silicone coating and robust construction, it is designed to withstand vibrations and provide consistent illumination for up to 5,000 hours.
This manual provides essential information for the safe and effective use of your new light bulb. Please read it thoroughly before installation and retain it for future reference.
Maklumat Keselamatan
Sentiasa patuhi langkah keselamatan berikut untuk mengelakkan kecederaan atau kerosakan:
- Ensure power is turned off at the switch or circuit breaker before installing or removing the bulb.
- Jangan melebihi wat maksimumtage rating of your light fixture. This bulb is 40 Watts.
- Allow the bulb to cool completely before handling, as incandescent bulbs generate heat during operation.
- Do not use this bulb with dimmer switches, as it is not dimmable.
- Mentol ini direka untuk kegunaan dalaman sahaja.
- Handle the bulb by its base to avoid damaging the glass or silicone coating.
- Dispose of broken bulbs safely according to local regulations.
Persediaan
The AutoCraft Rough Service Shop Light Bulb is designed for simple installation into standard E26 medium base sockets.
- Buka Bungkus Mentol: Carefully remove the bulb from its packaging. Inspect it for any visible damage.
- Sediakan Perlawanan: Ensure the light fixture is turned off and cool to the touch. If replacing an old bulb, unscrew it counter-clockwise.
- Pasang Mentol Baharu: Gently screw the AutoCraft bulb clockwise into the E26 medium base socket until it is snug. Do not overtighten.
Figure 1: The AutoCraft Silicone Coated Vibration Resistant Rough Service Shop Light Bulb, showing its frosted glass and brass-type base.
Figure 2: The AutoCraft Silicone Coated Vibration Resistant Rough Service Light Bulb in its retail packaging, highlighting key features like wattage and lumens.
Arahan Operasi
Once installed, operating the AutoCraft light bulb is straightforward:
- Hidupkan kuasa: Turn on the power switch connected to the light fixture. The bulb will illuminate instantly.
- Matikan: Turn off the power switch to extinguish the light.
- Penjanaan Haba: As an incandescent bulb, it will generate heat during operation. Ensure adequate ventilation around the fixture.
Penyelenggaraan
The AutoCraft light bulb requires minimal maintenance due to its durable design. However, following these tips can help prolong its life and maintain performance:
- Pembersihan: If the bulb becomes dusty, turn off the power and allow it to cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners.
- Pemeriksaan: Periodically check the bulb and fixture for any signs of wear or damage. Replace the bulb if the glass is cracked or the base is corroded.
- Vibration Environments: While designed to be vibration resistant, extreme or continuous heavy vibrations may still affect lifespan. Ensure the fixture is securely mounted.
Menyelesaikan masalah
If you encounter issues with your AutoCraft light bulb, consider the following:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Mentol tidak menyala. | No power to the fixture, loose bulb, or burned-out filament. | Check power switch/circuit breaker. Tighten bulb in socket. Replace bulb if necessary. |
| Mentol berkelip-kelip. | Loose connection, incompatible dimmer, or unstable power supply. | Ensure bulb is tightly screwed in. Do not use with dimmers. Check household wiring if problem persists. |
| Mentol cepat terbakar. | Vol berlebihantage, frequent on/off cycling, or extreme vibrations. | Sahkan voltage supply is 120 VAC. Reduce frequency of switching if possible. Ensure fixture is stable in high-vibration areas. |
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | AGS |
| Nombor Model | AC300A |
| Jenis Cahaya | pijar |
| Wattage | 40 Watt |
| Voltage | 120 Volt (AC) |
| Kecerahan | 250 Lumen |
| Kehidupan Purata | 5,000 Jam |
| Saiz Bentuk Mentol | A19 |
| Pangkalan Mentol | E26 Sederhana |
| Ciri Khas | Silicone Coated, Shock and Vibration Resistant, Not Dimmable, Shatter Resistant |
| Penggunaan Dalaman/Luar | Dalaman |
| bahan | Glass (with silicone coating) |
| Dimensi Produk | 2.38 x 2.38 x 4.13 inci |
| Berat Barang | 1.44 auns |
| Negara Asal | China |
Waranti dan Sokongan
For warranty information or technical support, please contact AGS customer service. Refer to the product packaging for specific contact details or visit the official AGS webtapak.
AGS Automotive Solutions
Webtapak: AGS Store on Amazon
