FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Pengenalan

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Maklumat Keselamatan

• Pastikan semua bahagian ada dan tidak rosak sebelum dipasang.
• Assembly may require two people due to the weight of components.
• Jauhkan kanak-kanak dan haiwan peliharaan dari meja semasa operasi.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Elakkan meletakkan cecair terus pada panel kawalan atau berhampiran komponen elektrik.
• Gunakan hanya penyesuai kuasa yang disediakan.
• Do not disassemble or modify the desk's motor or control system.

3. Kandungan Pakej

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Tiang Pengangkat (Kaki)
• Palang silang
• Plat Sokongan
• Motor
• Control Panel (Keypad)
• Penyesuai Kuasa dan Kabel
• Clamp Jalur Kuasa dengan 3 Outlet AC dan 2 Port USB
• Dulang Pengurusan Kabel
• Assembly Hardware (screws, hex keys, wrench)
• Manual Arahan

4. Arahan Perhimpunan

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Sediakan Desktop: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Pasang Motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Install Desk Feet: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Sambungan Pendawaian: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Lampirkan Clamp Jalur Kuasa: clamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Semakan Akhir: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Arahan Operasi

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Up/Down Buttons (Arrows): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Pratetap Memori (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Laraskan meja mengikut ketinggian yang diingini menggunakan anak panah atas/bawah.
  2. Press the 'M' button. The LED display will show 'S-'.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Ciri Anti-Perlanggaran: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Ciri-ciri

• Removable Desktop Power Outlet: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• AmpDesktop Seluruh Potongan: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Memory Buttons: 6-button digital controller with 4 programmable memory presets.
• Pelarasan Ketinggian Bermotor: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Pembinaan Tahan Lama: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Pengurusan Kabel: Integrated cable management device to keep your workspace tidy.

7. Spesifikasi

8. Penyelenggaraan

• Pembersihan: Lap permukaan meja dengan iklanamp kain. Elakkan bahan kimia keras yang boleh merosakkan kemasan.
• Pemeriksaan biasa: Periksa semua skru dan bolt secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Pemeriksaan Kabel: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Penyelesaian masalah

Jika anda menghadapi sebarang masalah dengan meja anda, sila rujuk kepada penyelesaian biasa berikut:

• Meja Tidak Bergerak: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Panel Kawalan Tidak Menjawab: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Anti-Collision Triggering Frequently: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Waranti dan Sokongan

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• Waranti 5 Tahun: Covers frames, motors, and other mechanical devices.
• Waranti 2 Tahun: Covers controllers, switches, and electronics.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.