Technical Pro Professional UHF Wireless Microphone Lapel & Headset System

1. Pengenalan

The Technical Pro Professional UHF Wireless Microphone Lapel & Headset System (Model WM1352) is designed for high-quality audio capture in various professional settings. This system features dual UHF microphones, including both lapel and headset options, providing flexibility for different applications. The receiver unit boasts individual XLR outputs, an LCD display for frequency monitoring, and robust metal construction for durability. It is engineered to deliver clear, robust, and optimal true sound with minimal feedback and interference.

Figure 1.1: Complete Technical Pro WM1352 Wireless Microphone System.

2. Kandungan Pakej

Sila sahkan bahawa semua komponen yang disenaraikan di bawah disertakan dalam pakej anda:

• UHF Wireless Receiver Unit
• 2 x UHF Bodypack Transmitters
• 2 x Mikrofon Lapel
• 2 x Alat dengar Mikrofon
• Power Adapter for Receiver
• Audio Cables (e.g., 1/4'' TS cable, XLR cables)
• Batteries (for transmitters)
• Manual Pengguna (dokumen ini)

Gambar 2.1: Lebihview daripada komponen yang disertakan.

3. Arahan Persediaan

Ikuti langkah ini untuk menyediakan sistem mikrofon wayarles anda:

1. Unpack and Place Receiver: Carefully remove all components from the packaging. Place the UHF wireless receiver unit on a stable, flat surface, ensuring adequate ventilation.
2. Sambungkan Antena: Screw the two included antennas onto the corresponding antenna ports on the rear of the receiver unit. Ensure they are securely tightened and positioned vertically for optimal signal reception.
3. Sambungan Kuasa: Connect the provided power adapter to the DC input on the rear of the receiver unit, then plug the adapter into a standard AC power outlet. Do not power on the unit yet.
4. Sambungan Output Audio:
   • Output XLR Individu: For separate control of each microphone, connect XLR cables from the "CH A" and "CH B" XLR outputs on the receiver to the corresponding inputs on your mixer or amplebih hidup.
   • Mixed 1/4'' Output: For a combined output of both microphones, connect a 1/4'' TS cable from the "MIX OUT" jack on the receiver to an input on your mixer or amplebih hidup.
5. Install Batteries in Transmitters: Open the battery compartment on each bodypack transmitter. Insert the provided batteries, observing the correct polarity (+/-). Close the compartment securely.
6. Connect Microphones to Transmitters: Plug the 3.5mm connector of either a lapel microphone or a headset microphone into the input jack on each bodypack transmitter. Ensure a secure connection.
7. Kuasa Awal Hidup:
   • First, power on your mixer/amplifier, ensuring its volume is set to a low level.
   • Next, power on the UHF wireless receiver unit using the power button on the front panel. The LCD display should illuminate.
   • Finally, power on each bodypack transmitter. The transmitter's indicator light should turn on, and the receiver's display should show a signal for the corresponding channel.
8. Penyegerakan Frekuensi (jika perlu): The system is typically pre-synced. If a microphone is not connecting, refer to the troubleshooting section for frequency synchronization steps.

Figure 3.1: Receiver Front and Back Panel Overview.

4. Operasi

Setelah sistem dipasang, ikuti garis panduan ini untuk operasi optimum:

• Urutan Hidupkan/Mati Kuasa: Always power on your audio mixer/amplifier first, then the receiver, and finally the transmitters. When powering off, reverse the sequence: transmitters first, then receiver, then mixer/amplifier. This prevents loud pops or damage to speakers.
• Pelarasan Kelantangan: Use the individual volume control knobs on the front panel of the receiver for Channel A and Channel B to adjust the output level of each microphone independently. Fine-tune the overall volume using your connected mixer or amplebih hidup.
• Paparan LCD: The LCD display on the receiver shows the current operating frequency for each channel and signal strength indicators. Monitor these to ensure stable connection.
• Peletakan Mikrofon:
  • Lapel Microphone: Clip the lapel microphone approximately 6-8 inches below the user's chin, centered on clothing, for clear voice pickup.
  • Mikrofon Alat dengar: Position the headset microphone boom approximately 1-2 inches from the corner of the user's mouth for direct sound capture and minimal ambient noise.
• Julat Operasi: The system operates within a specified UHF range. Maintain a clear line of sight between the transmitters and the receiver antennas for best performance. Obstacles like walls or large metal objects can reduce the effective range.
• Hayat Bateri: Monitor the battery indicator on the bodypack transmitters (if available) or listen for signs of weakening signal, which may indicate low battery. Replace batteries promptly to avoid interruptions.

Figure 4.1: Microphone Placement Examples.

5. Penyelenggaraan

Penyelenggaraan yang betul memastikan jangka hayat dan prestasi optimum sistem mikrofon tanpa wayar anda:

• Pembersihan:
  • Lap penerima dan pemancar dengan kain lembut dan kering.
  • For microphones, gently clean the mesh grille with a soft brush to remove any debris. Do not use liquid cleaners directly on the microphone capsule.
• Penjagaan Bateri:
  • Remove batteries from transmitters if the system will not be used for an extended period to prevent leakage and damage.
  • Gunakan bateri beralkali atau bateri boleh dicas semula berkualiti tinggi.
• Storan: Store the system in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. If possible, use the original packaging or a padded case for transport and storage.
• Pengurusan Kabel: Elakkan selekoh tajam atau kekusutan pada kabel. Simpan kabel dengan kemas untuk mengelakkan kerosakan.

6. Penyelesaian masalah

Jika anda menghadapi masalah dengan sistem anda, rujuk masalah dan penyelesaian biasa berikut:

7. Spesifikasi

Detailed technical specifications for the Technical Pro WM1352 system:

Figure 7.1: Receiver Dimensions.

8. Waranti dan Sokongan

For warranty information and technical support, please refer to the official Technical Pro webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan resit pembelian anda sebagai bukti pembelian untuk sebarang tuntutan waranti.

Untuk bantuan lanjut, lawati Technical Pro Store on Amazon or consult the contact information provided with your product packaging.