pengenalan
Terima kasih kerana membeliasing the Onforu 2 Pack Solar Motion Sensor Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your solar-powered security lights. Please read this manual thoroughly before use and retain it for future reference.
Kandungan Pakej
Ensure all items are present and in good condition. If any items are missing or damaged, please contact customer support.
- 2 x Onforu Solar Motion Sensor Lights
- 2 x Pendakap Pemasangan
- Perkakasan Pemasangan (Skru dan Palam Dinding)
- 1 x Manual Pengguna
Image: Contents of the Onforu Solar Motion Sensor Light package, showing two lights, mounting hardware, and the user manual.
Spesifikasi
| Jenama | Onforu |
| Nombor Model | ON-TY02-DW-4 |
| Kuantiti LED | 202 LED setiap lampu |
| Kecerahan | 2000 Lumen |
| Suhu Warna | 6500K (Putih Siang) |
| Illumination Area | 700-1200 kaki persegi |
| Sudut Pencahayaan | 270° wide illumination with 360° rotatable heads |
| Jenis Sensor Gerakan | PIR (Pasif Inframerah) |
| Jarak Pengesanan Pergerakan | 6-8m (19.6 kaki-26.2 kaki) |
| Sudut Pengesanan Gerakan | 120° |
| Kecekapan Panel Suria | >25% conversion rate (Monocrystalline Silicon) |
| Masa Mengecas | 6-10 hours (under ample sunlight) |
| Battery Life (Dim Mode) | Sehingga 30 jam |
| Battery Life (Medium Light Mode) | Sehingga 10 jam |
| Penilaian Kalis Air | IP65 |
| bahan | aluminium |
| Dimensi | 10 x 3 x 5 inci |
| Berat Barang | 1.21 paun |
Arahan Keselamatan
- Do not disassemble or modify the product. Unauthorized modifications may cause damage or injury.
- Keep the product away from fire or high temperatures to prevent battery explosion or leakage.
- Ensure the solar panel is exposed to direct sunlight for optimal charging performance. Avoid shaded areas.
- Clean the solar panel regularly to remove dust and debris, which can affect charging efficiency.
- Do not stare directly into the LED lights when they are on, as this may cause eye strain or damage.
- Install the light at the recommended height (6-10 feet) for optimal motion detection and illumination coverage.
Persediaan
Before initial use, ensure the solar light is fully charged. Place the light in direct sunlight for 6-10 hours. The light has a protective film on the LED panels; remove this film before use.
Memilih Lokasi
Choose a location where the solar panel can receive direct sunlight for at least 6-8 hours daily. Avoid areas under trees, eaves, or other obstructions that may block sunlight. The recommended installation height is 6-10 feet (1.8-3 meters) above the ground for optimal motion detection and light coverage.
Imej: Cthample of an ideal installation location for the solar light, showing it mounted above a door in a backyard patio area, receiving ampcahaya matahari.
Mod Pengendalian
The Onforu Solar Motion Sensor Light features three distinct operating modes, selectable via a switch located on the back of the unit. Ensure the switch is protected from moisture by its cover.
Image: Diagram illustrating the three lighting modes of the Onforu Solar Motion Sensor Light, showing how brightness changes with motion detection.
- Mode 1 (Dim Light Sensor Mode): The light stays on at 5% brightness. When motion is detected, it switches to 100% brightness. After motion ceases, it returns to 5% brightness.
- Mode 2 (Sensor Mode): The light remains off. When motion is detected, it turns on to 100% brightness. After approximately 20 seconds of no motion, it turns off automatically.
- Mode 3 (Medium Light Mode): The light stays on at 20% brightness throughout the night, regardless of motion detection.
To select a mode, use the switch on the back of the unit. The switch is protected by a rubber cover to ensure IP65 waterproofing.
Pemasangan
The Onforu Solar Motion Sensor Light is designed for easy wall mounting. Follow these steps for installation:
- Sediakan Permukaan Pemasangan: Choose a sturdy wall or surface that can support the light. Ensure the chosen location allows the solar panel to receive maximum direct sunlight.
- Tandai Lubang Gerudi: Use the provided mounting bracket as a template to mark the positions for drilling holes. The bracket has three screw holes.
- Lubang gerudi: Drill holes at the marked positions. If installing on masonry or concrete, insert the provided wall plugs into the drilled holes.
- Pasang Pendakap Pelekap: Pasangkan pendakap pelekap pada dinding menggunakan skru yang disediakan.
- Pasang Cahaya: Slide the solar motion sensor light onto the mounted bracket. The light is designed to securely clip into place.
- Laraskan Kepala Cahaya: Adjust the three rotatable light heads and the solar panel to your desired angles for optimal illumination and solar charging. The heads offer 360° rotation.
Imej: Terperinci view of the Onforu Solar Motion Sensor Light, highlighting its dimensions and the 360° rotatable design of the light heads and solar panel for adjustable light angles.
Penyelenggaraan
- Pembersihan: Kerap mengelap panel solar dengan lembut, damp kain untuk mengeluarkan habuk, kotoran atau serpihan. Panel solar yang bersih memastikan pengecasan yang cekap.
- Pemeriksaan: Periodically check the mounting screws and bracket to ensure the light remains securely attached.
- Perlindungan Alam Sekitar: The IP65 waterproof rating protects against rain, sleet, and snow. However, avoid submerging the unit in water.
Image: The Onforu Solar Motion Sensor Light shown in a rainy environment, illustrating its IP65 waterproof capability against water splash, heat, and frost.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lampu tidak menyala pada waktu malam. | Caj solar tidak mencukupi. | Ensure the solar panel receives 6-10 hours of direct sunlight daily. Clean the solar panel. |
| Penderia gerakan tidak mengesan. | Incorrect installation height or angle; obstructions. | Install at 6-10 feet height. Adjust the sensor angle. Remove any obstructions in the detection path. |
| Light is dim or short-lived. | Low battery charge; cold weather. | Allow more charging time. Battery performance may be reduced in extreme cold. |
| Lampu sentiasa menyala. | Light mode setting; continuous motion. | Check the selected operating mode. Ensure there is no continuous motion within the sensor's range. |
Waranti & Sokongan
Onforu provides a lifetime warranty for product upgrades. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided on the product packaging or visit the official Onforu webtapak.
Image: A warranty card for the Onforu Solar Motion Sensor Light, indicating a lifetime warranty for product upgrades and providing QR codes for support.
