ST STC-8101LC

ST 36V 2A Li-ion Battery Charger Instruction Manual

Model: STC-8101LC | Brand: ST

1. Pengenalan

This manual provides essential instructions for the safe and efficient use of your ST 36V 2A Li-ion Battery Charger (Model STC-8101LC). This charger is designed to provide a 42V 2A output, making it suitable for charging 36V Lithium-ion battery packs commonly found in e-bikes, hoverboards, and electric scooters equipped with a DC2.1 charging port. Please read this manual thoroughly before first use and retain it for future reference.

2. Arahan Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan renjatan elektrik, kebakaran atau kecederaan serius.

  • Penggunaan Dalaman Sahaja: This charger is designed for indoor use in dry conditions. Do not expose it to rain, moisture, or extreme temperatures.
  • Correct Battery Type: Only use this charger with 36V Lithium-ion battery packs. Using it with other battery types (e.g., lead-acid, NiMH) can cause damage to the battery and charger, and may lead to fire or explosion.
  • Voltage Keserasian: Ensure the battery pack's voltage matches the charger's output (42V for 36V Li-ion).
  • Pengudaraan yang Betul: Always place the charger in a well-ventilated area during use. Do not cover the charger.
  • Elakkan Kerosakan: Do not operate the charger if the power cord, plug, or charger casing is damaged. Contact customer support for assistance.
  • Cabut plag Apabila Tidak Digunakan: Disconnect the charger from the power outlet and the device when not in use or during cleaning.
  • Jauhkan daripada kanak-kanak: Produk ini bukan mainan. Jauhkan ia daripada kanak-kanak.
  • Tiada Pembongkaran: Do not attempt to open or modify the charger. There are no user-serviceable parts inside.

3. Ciri-ciri Produk

The STC-8101LC charger is designed for convenience and safety, incorporating several protective features:

  • Reka bentuk padat: Its small size makes it highly portable and easy to store.
  • Perlindungan Terlebih Arus: Menghalang kerosakan daripada aliran arus yang berlebihan.
  • Lebih-Voltage Perlindungan: Perlindungan terhadap voltage melonjak.
  • Perlindungan Litar pintas: Dimatikan secara automatik sekiranya berlaku litar pintas.
  • Perlindungan Polariti Terbalik: Protects against incorrect connection.
  • Perlindungan Suhu Terlebih: Prevents overheating during operation.
ST charger with icons for over-current, over-voltage, short circuit, reverse polarity, and over-temperature protection

Image: The charger features multiple protection mechanisms including over-current, over-voltage, short circuit, reverse polarity, and over-temperature protection, indicated by corresponding icons.

Hand holding the ST charger, illustrating its very small size

Image: A hand holding the charger, demonstrating its compact and portable design.

4. Persediaan

  1. Bongkar: Carefully remove the charger and power cable from its packaging. Inspect for any visible damage.
  2. Sambungkan Kabel Kuasa: Insert the 2-pole power cable into the charger's AC input port.
  3. Sambung ke Outlet: Plug the other end of the power cable into a standard wall outlet (100-240V AC).
  4. Sambung ke Peranti: Insert the DC2.1 charging plug into the charging port of your e-bike, hoverboard, scooter, or battery pack. Ensure the connection is secure.
Close-up of the DC2.1 charging port and 2-pole power cable

Imej: Terperinci view of the DC2.1 charging port (5.5mm outer, 2.1mm inner diameter) and the 1.5m 2-pole power cable.

5. Arahan Operasi

The charger features an LED indicator to show its status:

  • LED Merah: Menunjukkan bahawa bateri sedang dicas.
  • LED hijau: Indicates that the battery is fully charged or the charger is powered on but not connected to a battery.
  1. Once connected as per the 'Setup' section, the LED indicator will turn merah, signifying that charging has begun.
  2. When the battery is fully charged, the LED indicator will turn hijau.
  3. After charging is complete, first disconnect the charger from the device, then unplug it from the wall outlet.
Diagram showing charger LED indicators: Red for charging, Green for on/charged

Image: Visual guide to the charger's LED indicators: Red for 'Charging' and Green for 'On / Charged'.

6. Aplikasi

This charger is compatible with various devices that use 36V Lithium-ion battery packs and a DC2.1 charging port. Common applications include:

  • E-bikes (Electric Bicycles)
  • E-scooters (Electric Scooters)
  • Hoverboards
  • General 36V Li-ion Battery Packs with DC2.1 input
Diagram showing charger compatibility with eBikes, eScooters, Hoverboards, and Akku Packs

Image: The charger is suitable for various applications including e-bikes, e-scooters, hoverboards, and general battery packs.

7. Penyelenggaraan

  • Pembersihan: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storan: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cables are not kinked or tangled.
  • Pemeriksaan: Periodically inspect the charger, power cord, and connectors for any signs of wear or damage.

8. Penyelesaian masalah

Masalah Kemungkinan Punca Penyelesaian
Charger LED not lighting up. Tiada kuasa dari soket; sambungan longgar; pengecas rosak. Check power outlet with another device. Ensure all connections are secure. If still no light, the charger may be faulty.
LED is Green but battery is not charging. Battery already full; incorrect battery type/voltage; faulty battery; loose connection to device. Verify battery charge level. Confirm battery compatibility. Ensure DC2.1 plug is fully inserted. Test with another compatible battery if possible.
Charger feels excessively hot. Poor ventilation; prolonged use; internal fault. Unplug immediately. Allow to cool in a well-ventilated area. Ensure charger is not covered during use. If overheating persists, discontinue use and contact support.

9. Spesifikasi

Ciri Perincian
Jenama ST
Nombor Model STC-8101LC
Keluaran Voltage 42 Volt
Arus Keluaran 2 Ampsebelum
Jenis Bateri yang Serasi 36V Litium-ion
Jenis Penyambung DC2.1 (5.5mm outer, 2.1mm inner diameter)
Dimensi Produk (L x W x H) 12.5 x 6.2 x 3.6 cm
Berat Barang 350 Gram
Diagram showing the dimensions of the ST charger: 125mm length, 60mm width, 35mm height

Image: Dimensions of the charger, measuring 125mm in length, 60mm in width, and 35mm in height.

10. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk dokumentasi yang disediakan bersama pembelian anda atau hubungi peruncit anda. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.