1. Pengenalan
The EPEVER MT50 Remote Meter is designed for monitoring and setting parameters of compatible EPEVER solar charge controllers. It provides real-time operational data, working status, and alarm information through its large LCD screen, enhancing user control and system management.
2. Maklumat Keselamatan
Please read this manual carefully before installation and operation. Keep it in a safe place for future reference. Improper installation or use may result in damage to the device or connected equipment.
- Ensure all power connections are disconnected before installing or removing the MT50 meter.
- Connect the MT50 only to compatible EPEVER solar charge controllers as specified.
- Elakkan daripada mendedahkan peranti kepada suhu yang melampau, cahaya matahari langsung atau lembapan.
- Do not attempt to disassemble or repair the MT50 meter yourself. Contact qualified personnel for service.
3. Kandungan Pakej
Sahkan bahawa semua item disertakan dalam pakej anda:
- Meter Jauh EPEVER MT50
- Kabel Komunikasi (RJ45)
- Mounting Screws and Caps
- Manual Arahan
4. Produk Lebihview
The MT50 remote meter features a large LCD display and intuitive navigation buttons for easy interaction with your EPEVER solar charge controller.
4.1. Ciri-ciri Utama
- Keserasian: Designed for EPEVER LS-B(P), VS-BN, Tracer-BN, Tracer-A(N), eTracer, and iTracer series controllers.
- Pemantauan masa nyata: Displays operational data and working status in digital, graphic, and textual forms.
- Pengenalan Automatik: Automatically identifies the connected controller model and relevant parameter data.
- Fungsi Penggera: Provides real-time failure information and alarms.
- Antara Muka Mesra Pengguna: Six navigation function keys for direct and rapid operation.
- Bekalan Kuasa: Powered directly via the communication cable from the controller, no external power needed.
- Pemilihan Jenis Bateri: Supports Gel, Sealed, Flooded, and User-defined (programmable) battery types.
- Mod Kawalan Beban: Offers Manual, Light On/Off, Light On+Timer, and Time Control load modes.
4.2. Front and Back View
5. Persediaan dan Pemasangan
Follow these steps to properly install and connect your EPEVER MT50 Remote Meter to a compatible solar charge controller.
5.1. Mounting the MT50
- Choose a suitable location for the MT50 meter, ensuring it is easily accessible and visible.
- Use the provided mounting screws to secure the meter to a flat surface.
- Ensure the communication cable can reach the solar charge controller without excessive tension.
5.2. Connecting to the Solar Charge Controller
The MT50 connects to the solar charge controller via an RJ45 communication cable. This cable supplies power to the MT50 and facilitates data exchange.
- Locate the RS485 communication port on your EPEVER solar charge controller.
- Connect one end of the RJ45 communication cable to the MT50's RS485 port.
- Connect the other end of the RJ45 communication cable to the RS485 port on your solar charge controller.
- Once connected, the MT50 display should power on and show real-time data from the controller.
6. Arahan Operasi
The MT50 provides various screens for monitoring and parameter settings. Use the navigation buttons (Esc, Up, Down, Left, Right, OK) to navigate through the menus and adjust settings.
6.1. Data Pemantauan
The main display shows real-time data such as solar panel voltage/semasa, bateri voltage/current, and load voltage/current. Use the navigation buttons to scroll through different monitoring screens.
6.2. Menetapkan Parameter
To enter the setting interface, press and hold the "OK" button for 1 second. You can then navigate through various parameters such as battery type, battery capacity, voltage control parameters, and load control modes.
- Pemilihan Jenis Bateri: Choose between Gel, Sealed, Flooded, or User-defined. For User-defined, you can set specific voltagparameter e.
- Mod Kawalan Beban: Select from Manual, Light On/Off, Light On+Timer, or Time Control to manage your load output.
7. Penyelenggaraan
The EPEVER MT50 Remote Meter requires minimal maintenance. Regular checks can ensure optimal performance and longevity.
- Keep the display screen clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Periodically check the communication cable for any signs of damage or loose connections.
- Ensure the meter is securely mounted and not exposed to excessive vibrations.
8. Penyelesaian masalah
If you encounter issues with your MT50 Remote Meter, refer to the following common problems and solutions:
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| MT50 display is blank | No power from controller, faulty cable, or incompatible controller. | Check controller power. Verify cable connection. Ensure controller is compatible. |
| Incorrect data displayed | Incorrect parameter settings on MT50 or controller. | Review and adjust parameters in the "Control Para." menu. |
| Alarm indicator active | System fault (e.g., over-voltage, low battery). | Check the "Failure Info." menu for details and address the underlying issue with the solar system. |
| Butang tidak bertindak balas | Gangguan perisian sementara atau kerosakan fizikal. | Disconnect and reconnect the MT50. If issue persists, contact support. |
9. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | MT50 |
| Jenis Paparan | LCD |
| Dimensi (Pakej) | 5.24 x 5.16 x 3.15 inci |
| Berat Barang | 12.3 auns |
| warna | Kelabu |
| Bateri Diperlukan | No (powered by controller) |
| Antaramuka Komunikasi | RS485 (RJ45) |
| Pengawal Serasi | EPEVER LS-B(P), VS-BN, Tracer-BN, Tracer-A(N), eTracer, iTracer Series |
10. Waranti dan Sokongan
For warranty information and technical support, please refer to the documentation provided with your EPEVER solar charge controller or visit the official EPEVER webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
