FEIN 18V Cordless 4-Speed Drill/Driver ASCM18QM User Manual

1. Pengenalan

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your FEIN 18V Cordless 4-Speed Drill/Driver, model ASCM18QM. Please read this manual thoroughly before using the tool and keep it for future reference.

Figure 1: User operating the FEIN 18V Cordless 4-Speed Drill/Driver.

2. Maklumat Keselamatan

Always observe general power tool safety warnings and instructions provided with the product. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.

• Pakai pelindung mata: Always wear appropriate eye protection when operating the drill/driver.
• Bahan kerja selamat: Sentiasa pastikan benda kerja kukuh untuk mengelakkan pergerakan semasa operasi.
• Gunakan aksesori yang betul: Hanya gunakan aksesori yang direka khusus untuk alat ini.
• Pastikan tangan bersih: Jauhkan tangan dan pakaian longgar daripada bahagian yang bergerak.
• Putuskan kuasa: Putuskan sambungan pek bateri sebelum membuat sebarang pelarasan, menukar aksesori atau menyimpan alat.

3. Kandungan Pakej

Sahkan bahawa semua item yang disenaraikan di bawah disertakan dalam pakej anda:

• 2 rechargeable batteries (Li-ion)
• 1 pengecas pantas ALG 80
• 1 QuickIN drill chuck
• 1 klip tali pinggang
• 1 bit garage
• 1 pemegang
• 1 kotak alat

Figure 2: The FEIN 18V Cordless 4-Speed Drill/Driver shown with its included accessories, including batteries, charger, and chuck.

4. Persediaan

4.1 Mengecas Bateri

1. Connect the rapid charger ALG 80 to a power outlet (120V60H).
2. Insert the Li-ion battery into the charger. The charger's indicator light will show the charging status.
3. Setelah dicas sepenuhnya, keluarkan bateri daripada pengecas.

4.2 Memasang Pek Bateri

Slide the charged battery pack into the base of the drill/driver until it clicks securely into place.

4.3 Attaching the QuickIN Drill Chuck

The QuickIN MAX accessory interface allows for fast changes between applications.

1. Pastikan alat dimatikan dan bateri dikeluarkan.
2. Align the QuickIN drill chuck with the spindle of the drill/driver.
3. Push the chuck onto the spindle and twist clockwise until it locks securely.
4. To remove, twist counter-clockwise and pull the chuck off.

Rajah 3: Jarak dekat view of the FEIN 18V Cordless 4-Speed Drill/Driver, highlighting the QuickIN chuck system.

5. Arahan Operasi

5.1 Menghidupkan/Mematikan

Tekan suis pencetus untuk menghidupkan alat. Lepaskan suis pencetus untuk mematikannya.

5.2 Pilihan Kelajuan

The drill/driver features a 4-speed solid metal gearbox, providing optimum speeds for various applications.

• Speed 1 & 2: Lower speeds for high torque applications like driving large screws or drilling large holes in metal.
• Speed 3 & 4: Higher speeds for faster drilling in metal or other materials.

Use the speed selector switch located on the top of the tool to choose the desired speed setting.

5.3 Drilling in Metal

1. Select an appropriate drill bit for the material and desired hole size.
2. Choose a lower speed setting (1 or 2) for larger diameter bits or tougher metals.
3. Sapukan tekanan yang mantap, sekata. Jangan paksa gerudi.
4. Use cutting fluid when drilling metal to prolong bit life and improve cutting performance.

5.4 Driving Screws

1. Masukkan bit pemutar skru yang sesuai ke dalam chuck.
2. Select a lower speed setting (1 or 2) for driving screws, especially self-drilling screws, to maintain control and prevent stripping.
3. Adjust the torque setting on the clutch collar to prevent over-tightening or stripping screw heads.
4. Apply firm, consistent pressure in line with the screw.

6. Penyelenggaraan

Penyelenggaraan tetap memastikan prestasi optimum dan memanjangkan jangka hayat alat anda.

• Pembersihan: Keep the tool's ventilation openings clean to prevent overheating. Use a soft, damp cloth to clean the housing. Do not use harsh chemicals.
• Penjagaan Bateri: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries regularly, even if not in use, to maintain their health.
• Penyelenggaraan Chuck: Bersihkan rahang chuck secara berkala untuk memastikan cengkaman bit yang betul.
• Pemeriksaan: Regularly inspect the power tool for any signs of damage, loose screws, or worn parts. Have any damaged parts repaired by a qualified service technician.

7. Penyelesaian masalah

Sebelum menghubungi sokongan pelanggan, rujuk isu dan penyelesaian biasa berikut:

8. Spesifikasi

9. Maklumat Waranti

Your FEIN 18V Cordless 4-Speed Drill/Driver ASCM18QM comes with a 1+2 year warranty with online tool registration. Please register your tool on the official FEIN website to activate the extended warranty period. Keep your proof of purchase for warranty claims.

10. Sokongan Pelanggan

For technical assistance, spare parts, or service, please contact FEIN customer support:

• Webtapak: Visit the official Fein webtapak untuk Soalan Lazim dan sumber sokongan.
• telefon: Refer to your regional FEIN contact information for phone support.
• Pusat Perkhidmatan: Locate authorized FEIN service centers for repairs.