1. Pengenalan
The Jansite TPMS (Tire Pressure Monitoring System) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. This solar-powered wireless system includes a display unit and four external sensors, offering comprehensive alerts for various tire conditions. It is compatible with a wide range of vehicles including cars, SUVs, sedans, MPVs, and RVs.
Image: The Jansite TPMS display unit with a solar panel and four external tire pressure sensors labeled F.L (Front Left), F.R (Front Right), R.L (Rear Left), and R.R (Rear Right).
2. Kandungan Pakej
Sila sahkan bahawa semua item terdapat dalam pakej anda:
- 1 x TPMS Display Unit (Solar Powered)
- 4 x Penderia Tekanan Tayar Luaran
- 4 x Nat Anti-kecurian
- 1 x Spanner/Wrench for Sensor Installation
- 1 x Kabel Pengecas USB
- 1 x Manual Pengguna (Dokumen Ini)
3. Persediaan dan Pemasangan
3.1. Display Unit Placement
Place the TPMS display unit on your vehicle's dashboard in a location where it receives direct sunlight for optimal solar charging and does not obstruct your view jalan raya. Pastikan ia stabil dan selamat.
Image: The TPMS display unit positioned on a car dashboard, illustrating its compact size and clear display of tire data.
3.2. Pemasangan Sensor
Follow these steps to install the external tire pressure sensors:
- Sediakan Injap: Unscrew the original valve cap from the tire valve stem.
- Install Anti-theft Nut: Screw an anti-theft hexagonal nut onto the valve stem. Do not tighten it yet.
- Install Sensor: Screw the corresponding sensor (F.L for Front Left, F.R for Front Right, R.L for Rear Left, R.R for Rear Right) onto the valve stem until it is hand-tight.
- Penderia Selamat: Use the provided spanner/wrench to tighten the anti-theft nut against the sensor. This prevents unauthorized removal and ensures a secure fit.
- Semak Kebocoran: After installation, apply soapy water around the valve stem and sensor connection. Observe for bubbles, which would indicate an air leak. If a leak is detected, re-tighten the sensor and nut.
Image: A visual guide demonstrating the sensor installation process: unscrewing the valve cap, screwing on the anti-theft nut, screwing on the sensor, tightening the nut with a wrench, and checking for air leaks with soapy water.
Penting: Ensure the sensors are installed on the correct tire positions (Front Left, Front Right, Rear Left, Rear Right) as indicated on the sensors themselves to match the display unit's readings.
4. Operasi
4.1. Hidupkan/Mati Kuasa
The display unit features intelligent vibration sensing. It will automatically turn on when it detects vehicle movement (vibration) and turn off after a few minutes of no vibration to conserve power.
4.2. Charging the Display Unit
The display unit can be charged via two methods:
- Pengecasan Suria: The integrated solar panel charges the unit when exposed to sunlight.
- Pengecasan USB: For cloudy or rainy weather, or when solar charging is insufficient, use the provided USB cable to charge the unit via a USB power source.
Image: The TPMS display unit highlighting its solar panel for charging and a side view showing the USB charging port, indicating dual charging capabilities.
4.3. Real-time Monitoring Display
The LCD display shows real-time pressure and temperature for all four tires. Key indicators include:
- Tekanan Tayar: Displayed in Bar or PSI (user selectable).
- Suhu Tayar: Displayed in °C or °F (user selectable).
- Penunjuk Pengecasan Suria: Shows when the unit is actively charging via solar power.
- Penunjuk Tahap Bateri: Displays the current battery status of the display unit.
Image: A close-up of the TPMS display unit showing detailed real-time information for each tire, including pressure, temperature, and system status indicators like solar charging and battery level.
4.4. Mod Penggera
The system provides six automatic alarm modes to alert you to potential tire issues:
- Amaran Tekanan Rendah: Alerts when tire pressure drops below a preset threshold.
- Amaran Kebocoran: Detects rapid air loss from a tire.
- High Pressure Warning: Alerts when tire pressure exceeds a preset threshold.
- Amaran Suhu Tinggi: Alerts when tire temperature exceeds a preset threshold.
- Battery Low Power Warning: Indicates that the display unit's battery is low.
- Sensor Battery Low Warning: Indicates that a sensor's battery is low.
Image: The TPMS display unit illustrating various alarm icons for low pressure, leakage, high pressure, high temperature, and low battery, emphasizing comprehensive safety monitoring.
5. Penyelenggaraan
5.1. Sensor Battery Replacement
The external sensors are powered by replaceable Lithium Ion coin cell batteries (commonly CR1632). When a "Sensor Battery Low" warning appears on the display, replace the battery:
- Unscrew the sensor from the valve stem using the spanner/wrench.
- Buka penderia dengan berhati-hati casing.
- Remove the old battery and insert a new CR1632 battery, ensuring correct polarity.
- Tutup penderia casing securely and re-install the sensor on the tire valve, following the installation steps in Section 3.2.
5.2. Pembersihan
Wipe the display unit and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the components.
6. Penyelesaian masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit paparan tidak dihidupkan. | Low battery or no vibration detected. | Charge the display unit via solar or USB. Ensure the vehicle is moving for the vibration sensor to activate. |
| No tire data displayed or slow updates. | Sensor not paired, sensor battery dead, or signal interference. | Check sensor battery and replace if necessary. Ensure sensors are securely installed. Drive the vehicle for a few minutes to allow sensors to transmit data. If issues persist, refer to pairing instructions (if available in a more detailed manual) or contact support. |
| "Sensor Battery Low" warning. | Sensor battery is depleted. | Replace the battery in the indicated sensor (refer to Section 5.1). |
| Air leakage after sensor installation. | Sensor or anti-theft nut not tightened correctly. | Re-tighten the sensor and anti-theft nut using the provided wrench. Apply soapy water to confirm the leak is resolved. |
7. Spesifikasi
- Jenama: Jansite
- model: Jansite
- Julat Pemantauan: 0-62 PSI (approximate)
- Sumber Kuasa (Paparan): Solar / USB Charging
- Jenis Sensor: Luaran
- Bateri Sensor: Replaceable Lithium Ion coin cell (e.g., CR1632)
- Waterproof Rating (Sensors): IPX7
- Dimensi Pakej: 5.59 x 5.51 x 2.05 inci
- Keserasian: Car, SUV, ORV, MPV, Minibus, Wagon
Image: Illustrates the IPX7 waterproof capability of the sensors and icons representing various compatible vehicle types, including cars, SUVs, and MPVs.
8. Waranti dan Sokongan
For warranty information, technical support, or any questions regarding your Jansite TPMS, please refer to the contact information provided with your purchase or visit the official Jansite webtapak. Simpan resit pembelian anda sebagai bukti pembelian.
