1. Pengenalan
This manual provides detailed instructions for the installation, operation, and maintenance of your MoesGo Smart RF433 WiFi Wall Switch. This smart switch is designed for convenient control of your lighting, offering multiple control methods including touch, app, voice, and RF433 remote.
Ciri-ciri Utama:
- No neutral wire required for installation.
- Supports 2.4GHz WiFi connectivity for Smart Life/Tuya App control.
- Compatible with Alexa and Google Home for hands-free voice control.
- RF433 frequency support for remote control (remote not included).
- Programmable timing schedules and countdowns.
- Relay status memory and backlight preferences.
Image 1.1: MoesGo Smart RF433 WiFi Wall Switch, showcasing its sleek design and "No neutral" indicator.
2. Maklumat Keselamatan
WARNING: Electrical installation should only be performed by a qualified electrician. Always turn off power at the circuit breaker before installation or maintenance.
- Ensure the power supply is disconnected before handling any wiring.
- This device is designed for 2.4GHz Wi-Fi networks only. It is not compatible with 5.0GHz Wi-Fi.
- A capacitor is required for proper operation and must be connected to both ends of the bulb.
- Only use with certified bulbs that have a rated power of 5W or higher.
- This switch is not designed for use as a 3-way switch.
- The capacitor may produce a faint humming sound during operation. This is normal.
3. Kandungan Pakej
Sila semak pakej untuk item berikut:
- MoesGo Smart RF433 WiFi Wall Switch (1 unit)
- Capacitor (1 unit)
- Skru Pemasangan (2 unit)
- Manual Pengguna (Dokumen ini)
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | MoesGo |
| Nombor Model | WS-EU1-LB-N-MG |
| Mod Pengendalian | HIDUP |
| Jenis Kenalan | Biasanya Ditutup |
| bahan | kaca |
| Jenis Pemasangan | Lekap di dinding |
| Penilaian Perlindungan Antarabangsa | IP65 |
| warna | Hitam |
| Dimensi (Pakej) | 11 x 10.2 x 5.1 cm |
| Berat (Pakej) | 193 gram |
Image 4.1: Detailed dimensions of the MoesGo Smart Switch and a basic wiring diagram for single-wire installation with capacitor.
5. Pemasangan dan Persediaan
5.1 Senarai Semak Prapemasangan
- Verify your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Ensure the bulbs connected to the switch have a rated power of 5W or higher.
- Confirm you are not attempting to install this as a 3-way switch.
- Have the included capacitor ready.
5.2 Arahan Pendawaian
- Matikan Kuasa: Cari pemutus litar anda dan matikan kuasa pada suis yang anda gantikan. Sahkan kuasa dimatikan menggunakan voltantage penguji.
- Keluarkan Suis Lama: Tanggalkan suis dinding sedia ada anda dari kotak dinding dengan berhati-hati.
- Connect Capacitor: The included capacitor is essential for stable operation with no neutral wire. Connect the capacitor across the two terminals of the light bulb (in parallel with the load). This helps prevent flickering and ensures proper functionality.
- Sambungkan Suis Pintar dengan wayar:
- Connect the live wire (L) from your electrical box to the 'L IN' terminal on the MoesGo switch.
- Connect the load wire (L1) going to your light fixture to the 'L OUT' terminal on the MoesGo switch.
- Pastikan semua sambungan selamat.
- Pasang Suis: Gently push the wired switch into the wall box and secure it with the provided screws. Attach the glass panel.
- Pulihkan Kuasa: Hidupkan semula kuasa pada pemutus litar.
Image 5.1: Visual guide highlighting critical installation requirements: 2.4GHz Wi-Fi, minimum 5W bulb power, not for 3-way use, and no neutral wire needed.
Image 5.2: Illustration showing the capacitor and its importance for the MoesGo Smart Switch, indicating it should be connected to the bulb.
5.3 App Pairing (Smart Life/Tuya)
- Muat turun Aplikasi: Muat turun aplikasi "Smart Life" atau "Tuya Smart" daripada gedung aplikasi telefon pintar anda (iOS atau Android).
- Daftar/Log Masuk: Buka aplikasi dan daftar untuk akaun baharu atau log masuk dengan akaun sedia ada.
- Masukkan Mod Berpasangan: On the MoesGo switch, press and hold the touch button for approximately 5-10 seconds until the indicator light starts blinking rapidly. This indicates it's in pairing mode.
- Tambah Peranti: In the app, tap the "+" icon (usually in the top right corner) to add a device. Select "Switch (Wi-Fi)" or "Wall Switch".
- Sahkan Berkelip: Confirm that the indicator light on the switch is blinking rapidly in the app.
- Masukkan Butiran Wi-Fi: Masukkan nama dan kata laluan rangkaian Wi-Fi 2.4GHz anda.
- Sambung: The app will begin connecting to the switch. Once connected, the indicator light on the switch will stop blinking and remain solid.
- Namakan semula Peranti: You can rename the switch in the app for easier identification (e.g., "Living Room Light").
6. Operasi
The MoesGo Smart Switch offers multiple ways to control your lighting:
6.1 Sentuhan Kawalan
Simply touch the designated area on the glass panel of the switch to turn the light ON or OFF. The touch control functions independently of app or voice commands.
Image 6.1: A hand touching the MoesGo Smart Switch, illustrating the touch control functionality.
6.2 Kawalan Apl (Kehidupan Pintar/Tuya)
Once paired with the Smart Life or Tuya Smart app, you can control your switch from anywhere with an internet connection.
- Jauh HIDUP/MATI: Tap the switch icon in the app to turn the light ON or OFF.
- Relay Status Settings: Access the switch settings in the app to configure the relay status after a power outage (ON/OFF/Remember last status). You can also adjust backlight preferences.
- Kawalan Perkongsian: Share control of the switch with family members or friends through the app, allowing multiple users to manage the device.
- Kawalan Kumpulan: Create groups within the app to control multiple smart switches simultaneously.
Image 6.2: Screenshot of the Smart Life/Tuya app interface showing options for setting relay status and backlight preferences for the MoesGo Smart Switch.
6.3 Kawalan Suara (Alexa & Google Home)
Integrate your MoesGo Smart Switch with Amazon Alexa or Google Home for convenient hands-free voice control.
- Pautkan Akaun: Dalam aplikasi Alexa atau Google Home, dayakan kemahiran/perkhidmatan "Smart Life" atau "Tuya Smart" dan pautkan akaun anda.
- Cari Peranti: Minta Alexa atau Google Home untuk menemui peranti baharu.
- Perintah Suara: Gunakan arahan seperti:
- "Alexa, turn on [Switch Name]"
- "Hey Google, turn off [Switch Name]"
Image 6.3: Depiction of the MoesGo Smart Switch being controlled via voice commands using Amazon Alexa and Google Home devices.
Alat Kawalan Jauh 6.4 RF433
The switch supports RF433 frequency for remote control. An RF433 remote (not included) with 1527 encoding can be paired with the switch.
- Enter RF Pairing Mode: In the Smart Life/Tuya app, navigate to the switch settings and find the "RF area" to enter pairing mode.
- Pasangkan Alat Jauh: Press a button on your RF433 remote. Ensure a one-second delay between presses to avoid errors. The switch will confirm successful pairing.
6.5 Timing Schedules and Countdown
Utilize the Smart Life/Tuya app to set up automated schedules for your lights.
- Jadual: Program specific times for the light to turn ON or OFF daily or on selected days of the week.
- Kiraan balik: Set a countdown timer for the light to turn OFF after a specified duration (e.g., 1, 5, 30 minutes, 1 hour).
Imej 6.4: Bekasample of setting a timing schedule in the Smart Life/Tuya app, showing lights turning on at 7:00 AM and off at 10:00 PM.
7. Penyelenggaraan
To maintain your MoesGo Smart Switch:
- Pembersihan: Gently wipe the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Kemas kini Firmware: Semak aplikasi Smart Life/Tuya secara berkala untuk kemas kini perisian tegar yang tersedia bagi memastikan prestasi dan keselamatan yang optimum.
8. Penyelesaian masalah
- Suis Tidak Memberi Respons:
- Periksa sama ada pemutus litar ON.
- Ensure the wiring is correct and secure.
- Verify the capacitor is properly installed across the bulb terminals.
- Cahaya berkelip:
- This often indicates an issue with the capacitor installation or an incompatible bulb. Ensure the capacitor is correctly wired and the bulb meets the 5W minimum power requirement.
- Tidak Dapat Menyambung ke Wi-Fi:
- Sahkan bahawa rangkaian Wi-Fi anda ialah 2.4GHz.
- Ensure the switch is in pairing mode (rapidly blinking indicator light).
- Semak kata laluan Wi-Fi anda untuk ketepatannya.
- Move the switch closer to your Wi-Fi router during pairing.
- Faint Humming Sound:
- A faint humming sound from the capacitor is normal for no-neutral switches. If the sound is loud or concerning, recheck the capacitor installation and bulb compatibility.
- RF433 Remote Pairing Issues:
- Ensure the switch is in RF pairing mode via the app.
- Press remote buttons with a one-second delay between presses.
- Verify the remote uses 1527 encoding.
9. Waranti dan Sokongan
For warranty information and technical support, please refer to the official MoesGo website or contact their customer service directly. Details are typically provided on the product packaging or the manufacturer's official online resources.
