pengenalan
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Boreal BRISA 18,000 BTU 16 SEER Wall Mount Ductless Mini Split System. Please read this manual thoroughly before using the product and retain it for future reference.
Rajah 1: Boreal BRISA 18,000 BTU Mini Split System components, including the indoor wall-mounted air handler, the outdoor condenser unit, and the wireless remote control.
Maklumat Keselamatan
Always adhere to the following safety precautions to prevent injury or damage to the unit.
- Pemasangan Profesional: Installation must be performed by a state-licensed HVAC contractor. Improper installation can lead to electric shock, fire, water leakage, and may void the warranty.
- Bekalan Kuasa: Ensure the unit is connected to a 230V power supply. Do not use extension cords or multi-outlet adapters.
- Penyejuk: This system uses R410A refrigerant. Handling of refrigerant should only be done by qualified personnel.
- Keselamatan Elektrik: Do not operate the unit with wet hands. Disconnect power before cleaning or performing maintenance.
- Pembersihan: Kekalkan ruang yang mencukupi di sekitar unit dalaman dan luaran untuk aliran udara dan penyelenggaraan yang betul.
Persediaan dan Pemasangan
This section outlines the general steps for setting up your Boreal BRISA Mini Split System. Nota: Detailed installation instructions are provided in a separate installation manual intended for licensed HVAC professionals. This overview is for informational purposes only.
Komponen Termasuk:
- Indoor Wall Mounted Air Handler
- Unit Kondenser Luaran
- Kawalan Jauh Tanpa Wayar
Lineset and electrical wiring are required but not included with the system.
Pemasangan Selesaiview:
- Penempatan Unit Dalaman: Select a location on an interior wall that allows for optimal air distribution and drainage. Ensure sufficient space around the unit for maintenance.
- Penempatan Unit Luar: Position the outdoor condenser unit on a stable, level surface, away from direct sunlight or obstructions. Ensure proper airflow and drainage.
- Menyambung Talian Penyejuk: The indoor and outdoor units are connected via refrigerant lines (lineset). This process requires specialized tools and expertise to ensure proper sealing and vacuuming.
- Pendawaian elektrik: Connect the indoor and outdoor units to the main power supply (230V) and to each other according to wiring diagrams. All electrical work must comply with local codes.
- Saliran: Install drainage lines for condensate removal from the indoor unit.
- Ujian Sistem: After installation, a licensed technician will perform a system test to verify proper operation, check for leaks, and ensure optimal performance.
Rajah 2: The Boreal BRISA indoor unit, designed for wall mounting, showing its sleek white casing dan paparan digital.
Rajah 3: The Boreal BRISA outdoor condenser unit, featuring a protective grille over the fan and the Boreal Air Conditioning Inverter branding.
Arahan Operasi
Your Boreal BRISA Mini Split System is controlled by the included wireless remote control.
Fungsi Kawalan Jauh:
- Butang HIDUP/MATI: Menghidupkan atau mematikan unit.
- Butang MOD: Berkitar melalui mod operasi: Sejuk, Haba, Kipas, Kering, Auto.
- Butang TEMP ▲/▼: Melaraskan tetapan suhu yang dikehendaki.
- Butang KIPAS: Melaraskan kelajuan kipas (Auto, Rendah, Sederhana, Tinggi).
- Butang HAyunan: Controls the louver movement for air direction.
- Butang PEMASA: Menetapkan pemasa auto hidup atau mati automatik.
- Butang SLEEP: Mengaktifkan mod tidur untuk operasi senyap dan penjimatan tenaga semasa tidur.
- Butang I FEEL: Activates the "I Feel" function, which senses the temperature at the remote's location for more precise comfort.
Operasi asas:
- Hidupkan kuasa: Press the ON/OFF button on the remote control. The indoor unit display will illuminate.
- Pilih Mod: Press the MODE button repeatedly until your desired operating mode (e.g., Cool for cooling, Heat for heating) is displayed on the remote.
- Tetapkan Suhu: Use the TEMP ▲ or ▼ buttons to set your preferred temperature. For optimal energy efficiency, set cooling to 75-78°F (24-26°C) and heating to 68-72°F (20-22°C).
- Laraskan Kelajuan Kipas (Pilihan): Press the FAN button to cycle through fan speed options. Auto mode is recommended for general use.
- Matikan: Tekan butang HIDUP/MATI sekali lagi untuk mematikan unit.
Penyelenggaraan
Regular maintenance ensures optimal performance and longevity of your Boreal BRISA system. Always disconnect power to the unit before performing any maintenance.
Penyelenggaraan Unit Dalaman:
- Pembersihan Penapis Udara:
The air filters should be cleaned every 2-4 weeks, or more frequently depending on usage and air quality. Open the front panel of the indoor unit, remove the filters, and wash them with lukewarm water and mild detergent. Rinse thoroughly, allow to air dry completely, and then reinsert.
- Pembersihan Permukaan Unit:
Lap permukaan unit dalaman dengan lembut, damp kain. Jangan gunakan bahan kimia yang keras, bahan pelelas atau pelarut.
Penyelenggaraan Unit Luaran:
- Pembersihan gegelung:
Periodically check the outdoor coil for dirt, leaves, and debris. Gently clean with a soft brush or rinse with a garden hose. Avoid bending the coil fins.
- Pembersihan:
Ensure that the area around the outdoor unit remains clear of obstructions (e.g., plants, snow, debris) to maintain proper airflow.
- Pemeriksaan Profesional:
It is recommended to have a licensed HVAC technician inspect and service your system annually to ensure all components are functioning correctly and to check refrigerant levels.
Menyelesaikan masalah
Sebelum menghubungi sokongan pelanggan, sila rujuk isu dan penyelesaian biasa berikut.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Unit tidak dihidupkan. | No power; remote control batteries dead; unit in timer mode. | Check circuit breaker; replace remote batteries; cancel timer setting. |
| Penyejukan/pemanasan yang tidak mencukupi. | Dirty air filters; blocked outdoor unit; wrong mode selected; temperature setting too high/low. | Clean air filters; clear obstructions from outdoor unit; select correct mode; adjust temperature setting. |
| Kebocoran air dari unit dalaman. | Hos saliran tersumbat; pemasangan yang tidak betul. | Clear drain hose obstruction; contact a licensed technician for inspection. |
| Bunyi yang tidak biasa. | Loose parts; fan obstruction; normal operating sounds (e.g., refrigerant flow). | Check for loose parts; remove obstructions; if noise persists or is abnormal, contact a technician. |
If the problem persists after attempting these solutions, please contact Boreal customer support or a licensed HVAC technician.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Boreal |
| Nama Model | BRISA |
| Nombor Model | BRS18HPJ1A / 813919021420 |
| Kapasiti | 18,000 BTU (1.5 Tan) |
| Nisbah Kecekapan Tenaga Bermusim (SEER) | 16 |
| Nisbah Kecekapan Tenaga (EER) | 8.5 |
| Heating Seasonal Performance Factor (HSPF) | 9 |
| Pekali Prestasi (COP) | 3 |
| Voltage | 230 Volt |
| Sumber Kuasa | Elektrik Bertali |
| Jenis Penyejuk | R 410A |
| Sound Level (Outdoor) | 56 dB |
| Liputan Bilik | 600 - 1,000 kaki persegi |
| Ciri Khas | Kawalan Jauh |
Rajah 4: Dimensions for Boreal Brisa indoor and outdoor units. For the 18,000 BTU model, the indoor unit measures 38" x 11.75" x 8.75" and the outdoor unit measures 35.75" x 25" x 12.25".
Maklumat Waranti
Boreal provides the following manufacturer's warranty for this product:
- bahagian: Three (3) Years on all parts.
- Pemampat: Five (5) Years on the compressor.
Nota Penting: To be eligible for warranty coverage, installation must be performed by a state-licensed HVAC contractor. Please retain your installation receipt and proof of purchase.
Sokongan Pelanggan
For technical assistance, warranty claims, or further inquiries, please contact Boreal customer support. Refer to your product packaging or the Boreal official webtapak untuk maklumat hubungan terkini.
When contacting support, please have your model number (BRS18HPJ1A / 813919021420) and purchase date available.
