1. Pengenalan
The Intex Sit 'n Lounge Inflatable Pool Float is designed for comfortable relaxation in water. This float features a supportive backrest, two heavy-duty handles for stability, and a convenient cup holder. It is suitable for individuals aged 8 years and older.
Image 1.1: The Intex Sit 'n Lounge Inflatable Pool Float in green, featuring a clear top, mesh bottom, handles, and a cup holder.
2. Maklumat Keselamatan
WARNING: This is not a life-saving device. Do not leave children unattended while in use.
- Always supervise children and inexperienced swimmers.
- Do not use in rough water, strong currents, or near boat traffic.
- Do not dive or jump onto the float.
- Ensure the float is fully inflated before use.
- Jangan melebihi had berat maksimum 100 paun (45 kg).
- Jauhkan dari api dan benda tajam.
- Amaran Proposisi 65: Produk ini mengandungi bahan kimia yang diketahui oleh Negeri California untuk menyebabkan kanser dan kecacatan kelahiran atau bahaya pembiakan lain.
3. Kandungan Pakej
Sahkan bahawa semua komponen terdapat dalam pakej:
- 1 Intex Sit 'n Lounge Inflatable Pool Float
- Pemegang cawan bersepadu
- 2 Pemegang tugas berat
- Membaiki tampalan
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | 58883EP |
| Dimensi | 47 inches (119 cm) Diameter |
| bahan | 12 Gauge Vinyl |
| Bilik Udara | 2 |
| Had berat | 100 paun (45 kg) |
| Gred Umur | 8+ tahun |
| UPC | 641517309936, 078257313907, 698997697770 |
5. Setup (Inflation)
- Unfold the float on a clean, flat surface free of sharp objects.
- Locate the two inflation valves on the float.
- Open the valve caps.
- Using an air pump (not included), inflate each air chamber until the float is firm to the touch but not hard. Avoid over-inflation, as this can damage the seams.
- Quickly close the valve caps securely to prevent air leakage.
- Ensure both chambers are adequately inflated before use.
Image 5.1: The Intex Sit 'n Lounge Inflatable Pool Float in blue, demonstrating the design with a clear top and mesh bottom.
6. Arahan Operasi
- Ensure the float is fully inflated and all valve caps are securely closed.
- Carefully enter the float in shallow water.
- Position yourself comfortably in the center of the float, utilizing the backrest for support.
- Use the two heavy-duty handles for stability when entering, exiting, or adjusting your position.
- Place beverages in the integrated cup holder.
- Always use the float in calm water and under appropriate supervision.
Image 6.1: A person relaxing on the Intex Sit 'n Lounge float in a pool, demonstrating typical use.
7. Penyelenggaraan
7.1 Pembersihan
- Clean the float with mild soap and water.
- Bilas bersih dengan air bersih.
- Allow the float to air dry completely before deflating and storing. Do not use harsh chemicals or abrasive cleaners.
7.2 Penyimpanan
- Deflate the float completely by opening the valve caps and gently pressing out the air.
- Fold the float neatly to prevent creases and damage.
- Store in a cool, dry place away from direct sunlight, extreme temperatures, and sharp objects.
7.3 Pembaikan
- For small punctures, use the included repair patch.
- Bersihkan dan keringkan kawasan sekitar tusukan dengan teliti.
- Peel off the backing from the repair patch and apply it firmly over the puncture.
- Press down firmly for several minutes to ensure good adhesion.
- Allow the patch to cure for at least 30 minutes before re-inflating the float.
8. Penyelesaian masalah
8.1 Float is losing air
- Check Valve Caps: Ensure all inflation valve caps are securely closed.
- Periksa untuk Tusukan: Inflate the float and submerge it in water, or apply soapy water to the surface. Look for bubbles, which indicate a leak. Use the repair patch as described in Section 7.3.
- Perubahan Suhu: Air pressure inside the float can decrease in cooler temperatures, making it appear under-inflated. Re-inflate slightly if necessary.
8.2 Difficulty Inflating
- Kedudukan injap: Ensure the pump nozzle is properly inserted into the valve and that the valve is fully open for inflation.
- Pump Functionality: Verify that your air pump is working correctly and providing sufficient airflow.
9. Waranti & Sokongan
9.1 Maklumat Waranti
The manufacturer provides a 1-season warranty for this product. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects under normal use conditions.
9.2 Sokongan Pelanggan
For further assistance, replacement parts, or to inquire about warranty service, please visit the official Intex website or contact Intex customer service directly.
Anda boleh mendapatkan maklumat lanjut dan produk di Intex Brand Store.
