1. Pengenalan
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your ATLAS Automotive Equipment 9KBPX 2-Post Lift/Hoist. Please read this manual thoroughly before installation or operation to ensure proper usage and to prevent potential hazards.
2. Maklumat Keselamatan
Always prioritize safety when operating the lift. Failure to follow safety guidelines can result in serious injury or equipment damage.
- Baca Manual: Understand all operating and safety procedures before use.
- Kakitangan Berkelayakan: Installation and major maintenance should only be performed by qualified technicians.
- Asas yang Betul: Ensure the concrete floor meets minimum thickness and strength requirements for anchoring.
- Kapasiti Muatan: Never exceed the 9,000 lbs (4082 kg) maximum lifting capacity.
- Kedudukan Kenderaan: Always center the vehicle on the lift arms and ensure proper contact with the lift points.
- Kunci Keselamatan: Always engage the safety locks after raising the vehicle to the desired height. The lift is equipped with a spring-loaded Secondary Lock System (SLS) that automatically engages if a chain slackens or breaks.
- Kelegaan Overhed: Be aware of the minimum ceiling height requirement (9'6") and ensure adequate clearance for the vehicle being lifted. The lift includes a safety feature that will shut off the system if the vehicle reaches an excessive height, preventing damage.
- Kawasan Jernih: Keep the area around the lift clear of personnel and obstructions during operation.
- Hentian kecemasan: Familiarize yourself with the location and operation of the emergency stop control.
3. Produk Lebihview dan Ciri
The ATLAS 9KBPX is a robust 2-post baseplate style lift designed for versatility and reliability in automotive service environments, particularly those with lower ceiling heights.
- Reka bentuk padat: Baseplate style allows for installation in garages with ceilings as low as 9'6".
- Kapasiti Tinggi: 9,000 lbs lifting capacity suitable for a wide range of vehicles, from small cars to light-duty trucks.
- Symmetric Arms: Equipped with symmetric arms and automatic arm restraints for stable and secure vehicle positioning.
- Dual Hydraulic Chain Drive: Utilizes dual hydraulic chain drive cylinders for smooth and powerful lifting.
- Aksesori yang disertakan: Comes with an 8-piece truck adapter set and essential mounting hardware.
- Chain Over Roller System: Features a chain over roller piston lift carriage system for reliable operation.
- Penyamaan Kabel: A cable equalization system ensures synchronized locking and evenly raised arms.
Figure 1: ATLAS 9KBPX 2-Post Lift with a black SUV in a raised position.
Figure 2: Comparison of Overhead vs. Baseplate 2-Post Lifts, highlighting the baseplate's suitability for low ceilings and lifting taller vehicles without overhead obstruction.
4. Spesifikasi
| Ciri | Perincian |
|---|---|
| Model | 9KBPX (XH-9KBPX) |
| Kapasiti Mengangkat | 9,000 paun (4082 kg) |
| Ketinggian Siling Minimum | 9'6" (2.90 m) |
| Max Lifting Height (Standard) | 74 1/2" (6' 2 1/2") |
| Max Lifting Height (with Truck Adapters) | 80 3/4" (6' 8 3/4") |
| Ketinggian Keseluruhan | 111 1/2" (9' 3 1/2") |
| Width Outside Columns | 124 7/8" (10' 4 7/8") |
| Width Inside Columns | 110" (9' 2") |
| Drive Thru Width | 101" (8' 5") |
| Overall Width (with Power Unit) | 142" (11' 10") |
| Thickness of Column Steel | 0.2" |
| Berat Barang | 1450 paun (657.7 kg) |
| Dimensi Produk | 113 x 40 x 22 inci (287 x 101.6 x 55.9 cm) |
Figure 3: Detailed dimensions of the ATLAS 9KBPX 2-Post Lift, including overall height, width, and drive-thru width.
Rajah 4: Jarak dekat view of the chain over roller piston lift carriage system, illustrating the hydraulic fluid mechanism and cable equalization.
5. Persediaan dan Pemasangan
Proper installation is critical for the safe and reliable operation of your lift. Refer to the detailed instructions provided in the separate installation guide for comprehensive steps. Key steps include:
- Membongkar dan Pemeriksaan: Carefully unpack all components and inspect for any shipping damage or missing parts.
- Penyediaan Tapak: Ensure the installation site has a level concrete foundation of adequate thickness and strength, as specified in the installation guide.
- Column Placement and Anchoring: Position the columns accurately and secure them to the concrete floor using the provided anchor bolts.
- Floor Plate Installation: Install the floor plate between the columns, ensuring proper alignment and securing it with screws.
- Hydraulic System Setup: Install the power unit, connect the hydraulic hoses, and fill the reservoir with the recommended hydraulic oil.
- Penghalaan Kabel: Route the equalization cables and safety tripwires according to the diagrams, ensuring they are free from obstructions and properly tensioned.
- Lifting Arm Installation: Attach the symmetric lifting arms to the carriages, ensuring the pins are securely in place and the spring retainers are installed.
- Sambungan Elektrik: Connect the power unit to the appropriate electrical supply as per local codes and the manufacturer's specifications.
- Ujian Awal: Perform a test run without a vehicle to check for proper operation, fluid levels, and engagement of safety mechanisms.
6. Arahan Operasi
Follow these steps for safe and effective operation of your ATLAS 9KBPX lift:
- Sediakan Kenderaan: Drive the vehicle onto the lift, ensuring it is centered between the columns.
- Lengan Angkat Kedudukan: Swing the symmetric arms into position, ensuring the lift pads make solid contact with the vehicle's designated lift points. Use the included truck adapters or height adjustment pads as needed to achieve proper contact and clearance.
- Naikkan Kenderaan: Press and hold the 'UP' button on the power unit. The lift will raise, and you will hear the safety locks engage at various intervals.
- Pasangkan Kunci Keselamatan: Once the vehicle reaches the desired working height, slightly lower the lift until the safety locks fully engage and the weight of the vehicle rests on them. This is indicated by an audible 'click' and the lift settling slightly.
- Turunkan Kenderaan: To lower the vehicle, first slightly raise the lift to disengage the safety locks. Then, pull the safety release handle and simultaneously press the pressure relief handle on the power unit. The vehicle will begin to descend. Ensure the area beneath the vehicle is clear.
- Remove Vehicle: Once the lift arms are fully lowered, carefully drive the vehicle off the lift.
7. Arahan Penyelenggaraan dan Penjagaan
Regular maintenance ensures the longevity and safe operation of your lift.
- Penggunaan Harian: Periksa sama ada peranti keselamatan boleh dikunci pada tempatnya dan sama ada penyambung berfungsi dengan betul. Jika terdapat sebarang bahaya yang berpotensi, baiki atau gantikannya dengan segera.
- Weekly Inspection: Inspect the steel wire for looseness or broken strands. Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.
- Bi-Weekly Check: Periksa semua sambungan hos hidraulik untuk kebocoran atau koyakan, dan baiki atau gantikannya jika perlu.
- Penyelenggaraan Bulanan: Periksa sama ada semua skru dan nat diketatkan dengan betul. Selepas ujian dijalankan, ketatkan semula semua skru dan nat.
8. Penyelesaian masalah
This section provides basic troubleshooting steps for common issues. For complex problems, contact qualified service personnel.
- Lift Does Not Raise: Check power supply, hydraulic fluid level, and ensure no safety mechanisms are engaged preventing upward movement.
- Lift Lowers Unevenly: Inspect equalization cables for proper tension and condition. Check hydraulic system for leaks or air.
- Bunyi Luar Biasa: Investigate any grinding, squealing, or clunking sounds. This may indicate worn components, lack of lubrication, or mechanical interference.
- Hydraulic Leaks: Immediately identify and repair any hydraulic fluid leaks. Check hose connections, seals, and cylinders.
9. Waranti dan Sokongan
For warranty information, technical support, or to order replacement parts, please contact ATLAS Automotive Equipment customer service. Keep your purchase receipt and model number (9KBPX) readily available when contacting support.
Pengeluar: Peralatan Automotif Atlas
Maklumat Hubungan: Refer to your purchase documentation or the manufacturer's official webtapak untuk mendapatkan butiran sokongan terkini.
